Changing Timing Belt on Suzuki Samurai or Sidekick Geo Tracker- Setting Timing from scratch - stabbing distributor correctly - Hwy83 SUZUKI instructional video
Пікірлер: 85
@clydebethatway7485 Жыл бұрын
Tony newcomer for the Suzuki samurai. You are a lifesaver, and a wealth of information and downright entertaining. Thank you for being there for us.
@Hwy83SUZUKI Жыл бұрын
Happy to help out! Thanks for watching
@clydebethatway7485 Жыл бұрын
Tony, you’re an animal I just sent you that message like 30 seconds ago and you responded already. I don’t even know what to say.
@Chacheea4196 ай бұрын
I love your explanations. Dumbed down more than I needed personally, but dudes, for ppl to absorb in lam-ins term so freaking amazing. Your videos are spot on. 🍺 cheers ladies and gents.
@codyswilley7 ай бұрын
You the man. I put headgaskets on my samurai. 1.6 8v and i put it in time and stabbed the distributor and when i got it all done and hit the key she fired right up. Thanks Tony. *OHHHH YEA*
@normanallas3811 Жыл бұрын
Clear and very informative. Thank you so much Tony 👍👍👍
@margotschumacher65653 жыл бұрын
this is so entertaining. best timing belt vid yet
@MuniNadan-rk4jd9 ай бұрын
You guys are great Tony. Informative videos for us new mechanics to see learn and help us in our DIY projects. God bless ❤
@nelsonluke-se2xp Жыл бұрын
Best explaination for timing issues as well.
@ohiorivervalleymushroomhun92647 ай бұрын
You’re the man Tony, thank you!
@jessestevenson56849 ай бұрын
Dude I love this guy… if I’m having issues. I go straight to his page.
@gmisltr2 жыл бұрын
Hey Tony, Thanks for all the great vids, I just put a reman head on my 96 x90 5 spd, I did it once b4 and had to figure out the timing, which I did then, but the valve seals were bad in that one so I got a reman, and I got confused again, I rotated the crank while it apart, then rotated the cam separate, Then I thought I had everything right and tried to adjust valves which I couldn't, I had everything set right before I took it apart, but this time I could remember how I did that, I had cam and crank marks at 12, belt on, rotated 2 times, and it looked good but the vales were wrong, after a while I figured I had the cam 90 degrees off, so I took the belt off, moved it, and then the valves were good, and everything lined up, , after putting it all back together, I tried starting and it acted like it was gonna start for half a second then just cranks, won't start?? now what?
@ashleychauhanashleybchauha1655 Жыл бұрын
Very nicely and clearly explained. Thanks Tony. Hwy83 guys
@Hwy83SUZUKI Жыл бұрын
Glad you enjoyed the video, thanks for watching!
@hkallen39584 жыл бұрын
Thank you man for the info that help me a lot
@Hwy83SUZUKI4 жыл бұрын
happy to help out!
@gustavovillateg7567 Жыл бұрын
Thanks for your information. That's help me to start my samurai
@jacklandismcgowan14134 жыл бұрын
Great video 👍👍👍
@MuniNadan-rk4jd Жыл бұрын
Thanks bro you are great and explained it so well. God bless you for sharing the knowledge and skills.
@Hwy83SUZUKI Жыл бұрын
Happy to help out!
@jaythelandscaper30892 жыл бұрын
Great video man 💯
@Hwy83SUZUKI2 жыл бұрын
Thanks for watching!
@joshuahedgecock23033 жыл бұрын
Appreciate the video brother!
@Hwy83SUZUKI3 жыл бұрын
Happy to help out 👍🏼
@REVNUMANEWBERN3 жыл бұрын
@@Hwy83SUZUKI I'm looking to buy a 87 so doing a CRASH learning course on these I know NOTHING about, supposedly the engine had been rebuilt, are there any specific things I need to pay careful attention to while looking at it & driving it B4 I buy?? Thanks for ANY help
@kevinlarriuz83783 жыл бұрын
Thanks a lot 👍👍
@Hwy83SUZUKI3 жыл бұрын
Hope the video helps your project!
@suzukisamurai93624 жыл бұрын
So can you change the front seals without having to time it with the timing gun thanks for the informative video's
@classicones29343 жыл бұрын
Very well explained. I have a question. I have suzuki swift 1987 model with 3 cylinder 1000cc engine. My cam pulley is just like yours. Plz tell me which mark of cam to be alligned when cylinder 1 is at TDC
@adenlord10332 жыл бұрын
Is it usually the 4th piston used for timing in other cars? Even if they have different timing marks?
@denzilbarnett98754 жыл бұрын
does the escudo and the vitara uses the same engine parts or gasket kit
@michaelgallen32467 күн бұрын
great video, have you got any tips on replacing water pump, & steel water pump pipe, rear of water pump.. cheer mate.
@jennybigham65647 ай бұрын
I love your video. Thank you for doing them. I have an 1987 Suzuki samurai I'm replacing the camshaft seal and crankshaft seal when I put them in are they supposed to be flush?
@Rafael-oq9tpАй бұрын
I have a 1999 susuki diesel, what water pump does it need, thanks for the explanation.
@smaqdaddy2 жыл бұрын
Hey Tony, which plug wire do I hook up to to dial in timing? Is it #1 like normal or #4?
@codyswilley7 ай бұрын
Which was it #1 or #4. I have the same question. I'm assuming #4 since that's what it was timed for but not sure.
@codyswilley7 ай бұрын
Do I put the timing light clip on #4 plug wire.
@Azdesertbirds3 ай бұрын
Does the rotor spin clockwise or counter clockwise? Is the firing order 4321 or 4123?
@SuzukiGuru4 жыл бұрын
The High life is signature for hw83
@ethanorr72903 жыл бұрын
I don't know if you still read new comments on older videos but there's an e and an I on my cam. I have the 1.6l engine. There looks like a timing mark on the harmonic balancer but could be where someone dinged it. It doesn't quite line up with they key slot. I'm kind of lost here
@Hwy83SUZUKI3 жыл бұрын
On the 16V engine point the E on cam gear at 12 o clock, harmonic balancer pulley at 12 o clock. Then the distributor pointing at #4 cylinder to set timing
@arthc.castillo898210 ай бұрын
Great video. Thank you so much! Hello from Mexico
@Hwy83SUZUKI10 ай бұрын
Happy to help amigo! Viva la Raza 🍻
@jamescraig55264 ай бұрын
Okay tony I have a 88 samurai that I can't get timed right I replaced the coil and replaced the carburetor but still have a serious backfire through the exhaust any suggestions to get it straightened out
@Hwy83SUZUKI4 ай бұрын
Follow instructions on video then check with a timing light to dial in
@nathanbyrne77663 жыл бұрын
I am wonder why my timing belt is rubbing into my timing belt cover , could it be the cam or crank shaft pulleys? Or the tensioner
@Hwy83SUZUKI3 жыл бұрын
This is very common, the plastic timing belt cover warps overtime from the engine heat. Then it will rub on the timing belt. You can replace the cover and you'll be good for awhile until the process repeats
@ocieljuarez7772 жыл бұрын
Great videos and explanations, I have a 96 geo tracker i did the timing and distributor pointing at cylinder 4 im getting spark and fuel but the tracker won't start any idea what can be the issue my fuel gauge is not working due to rats eat the wire from top of the gas tank but fuel pump is good and all the hoses ,the car cranks and try to start but I just can get it to run thank you very much and God bless 😉
@Hwy83SUZUKI2 жыл бұрын
We have another video showing the timing process for 96 model 1.6L 16v engine
@ocieljuarez7772 жыл бұрын
@@Hwy83SUZUKI thank you have a great weekend
@jaydub42342 жыл бұрын
Is a jumper wire needed to dial in timing like with the 16v? I have a 1990 Tracker.
@Hwy83SUZUKI2 жыл бұрын
89 and 90 model do not need, they have a vacuum advance distributor
@jaydub42342 жыл бұрын
@@Hwy83SUZUKI awesome, Thank you I was hoping it was something simple!
@SkaterWalsien-mp2uhАй бұрын
Gd day sir TONY, been watch all round ur vlogs over suzuki's ,,, especially Sammy's,,, how much if i buy timing kit( belt, bearing ) + water pump?? So hard 2 find sammy parts here in phillipines,,, much appreciate for ur response,,,
@flyingeaglephotography89062 жыл бұрын
I have a 1987 Suzuki samurai and I had the engine replaced as well as put a 3k carb in it as well, and it still won't start any ideas?
@Hwy83SUZUKI2 жыл бұрын
Confirm fuel, spark and compression and then check timing
@flyingeaglephotography89062 жыл бұрын
@@Hwy83SUZUKI OK I will do that. Thanks.
@Peter170254Ай бұрын
when i change the belt, and when all is done, I remove the spring, it's not needed, as it can come lose and cause damage
@coltonmaxwell30773 жыл бұрын
i love the "if youre gonna torque wrench these bad boys, i mean PROBABLY good suggestion but not really needed" #keepitsloppy
@samzuvich26693 жыл бұрын
my problom is , i have no compression i replaceed the timeing belt after the belt broke , and i saw you said something about tricking the computer will that work it get the timeing back or what the f---k did i do ? can you tell me from what ive told you ? if you need more infoe let me know , PLEASE! ITS MY ONLY RIG , AND IM HERE UNTELL TIS FIXED
@nathanbyrne77663 жыл бұрын
Is this the same as the 1994 8 valve tracker ?
@Hwy83SUZUKI3 жыл бұрын
Yes it is. Samurai 1.3L 8v is same procedure as 1.6L 8v found in geo tracker
@nabajojak8734 Жыл бұрын
I need help with my 97 tracker it just quit on me running one day won't start next day just spinning when cranking...🤔. Help us!
@Hwy83SUZUKI Жыл бұрын
Broken timing belt
@wandeenteeksingh9498 ай бұрын
Hi men
@joshwaller62263 жыл бұрын
got a 96 sidekick with the 1.6 16v and for some reason the head has use I written on it any idea why
@Hwy83SUZUKI3 жыл бұрын
What's written on it?
@joshwaller62263 жыл бұрын
@@Hwy83SUZUKI is says use I under the timing mark on the head
@joshwaller62263 жыл бұрын
@@Hwy83SUZUKI I'm guessing instead of e but not sure why the manual says to use e as the timing mark
@Hwy83SUZUKI3 жыл бұрын
@@joshwaller6226 E "exhaust " should be straight up at 12 o clock when setting timing
@joshwaller62263 жыл бұрын
@@Hwy83SUZUKI yeah that's what the manual says just odd that someone wrote use I on the head lol I should say I got this thing in pieces and I am trying to put it back together because they pulled it all apart lost interest and pieces and stuffed everything in the back seat lol
@tylerbigelow89854 жыл бұрын
Is a 16v 1.6 also non interference?
@adamoertel55874 жыл бұрын
Tyler Bigelow belts are non interference but chains are interference
@darrylkeeney40403 жыл бұрын
16v is supposed to be non interference
@Rafael-oq9tpАй бұрын
Tengo un jeep 1999 susuki diésel que bomba de agua es que lleva
@shannondawson88973 жыл бұрын
How can I contact u
@Hwy83SUZUKI3 жыл бұрын
Our online STORE and information is available at Hwy83suzuki.com
@samzuvich26693 жыл бұрын
ONE MORE THING . YOU THINK I BENT VALVES? BECOUSE I DONT WHANT TO TAKE THE HEAD OFF
@margotschumacher65653 жыл бұрын
Nooooo DX Why does no one show how to remove the timing belt. I'm gonna fckn break it DX
@Hwy83SUZUKI3 жыл бұрын
There is one 12 mm bolt on the tensioner bearing. Loosen that that will take the pressure off the belt and it will slide right off
@margotschumacher65653 жыл бұрын
Hwy83 SUZUKI bless youuu 🤘🤘🤘 lol I’m stuck on trying to get the 4 bolts connecting the fan to (name of thing holding timing belt) off. I’m down to the last two and they’re almost stripped. Anyone know how to keep it from turning when getting the bolts off??