If im seeing right, you dont have a cross wire for your middle battery. Your bms will only charge 1 battery out of the 3 in the middle which defeats the purpose of having a bms for balanced charging. Its an easy fix just have another wire connected parallel across your 7.4v and done
@ElectroRetro3 жыл бұрын
I fixed it later
@tabineshhtc3 жыл бұрын
Right bro
@sharpmerciful787 Жыл бұрын
Do NOT solder directly to 18650 cells. They'll overheat and either be ruined or explode and you'll have a huge fire. You have to spot weld nickel strips to the cells and then solder wires to the strips. Plus, with spot welding, it is cheap, ensures a good connection, and can provide some structural support. It is also extremely space efficient, especially if you're working on a project that has very little room to work with and battery cell holders can get in the way of that.
@sharpmerciful787 Жыл бұрын
So you put electrical tape on the battery pack so that you can tape the BMS to it. My question is can you put PVC Heat Shrink Tubing over it, heat up the tubing so it looks more professional and keeps the structural integrity? I've seen a video where he puts 2 heat shrink tubings over it, so wondering if I can do the same.
@aforexplore4 жыл бұрын
You haven't connected 7.4 v cell volt terminals in parallel. It won't balance charge. Then what's the use of BMS.Only short circuit protection??😁.Please consider connecting 7.4v terminals in parallel😁
@aadhisunil46375 жыл бұрын
Was waiting for your comeback.Nice video 😀😀
@thusharpa29245 жыл бұрын
The LEGEND IS BACK ALSO NICE VID THANKS BRO😁
@cesariopereira74313 жыл бұрын
You have a problem on your wire connections. You have 3p*(3s), but only 1 serie have balanced charge, the other 2 series no. You should rectify your circuit.
@luixstrada60744 жыл бұрын
Muchas gracias mi amigo gracias a tu vídeo pude conectar todo correctamente
@kapilsobhee72814 жыл бұрын
I have tried it today works perfectly
@Huawei-pidhisamestate Жыл бұрын
Thank you for the video!! I have a question for the bms Amps, is it required to use a 20A, 40A or 60A for the 3s3p? Cause I don't really know what's that for😅
@ElectroRetro Жыл бұрын
It's the maximum charge or discharge current.
@Huawei-pidhisamestate Жыл бұрын
@@ElectroRetro thank for the reply, so the higher the most dangerous? I was about to buy a 40A is it good, for charging smartphones like mine that needs a 2.1A charger?
@ElectroRetro Жыл бұрын
20A is more than enough for charging smartphones.
@themattprincebro3 жыл бұрын
I need this on my Bluetooth speaker, i build 200 watts soeaker portable Bluetooth on my channel
@fuzzybat232 жыл бұрын
Yeah, you gotta be careful soldering directly to lithium batteries. And by careful, I mean keep a large bucket of sand right beside you to toss them in and cover them if things go south.
@chaitanyakadam81943 жыл бұрын
BMS wiring/soldering process left out. Makes is really difficult for new users.
@ibrahimbalouch40283 жыл бұрын
Hello sir i have 12v 3s40A bms and six cells of 4.2v 18650. Can i connect and make the battery.
@ElectroRetro3 жыл бұрын
Yes
@athuldev53075 жыл бұрын
👍
@bhargav_gor3 жыл бұрын
Hii bro mean drone bana raha hu to kya 3s battery and bms power module ko sathe mea use karsakta hu drone mea 40a hai 11.8 v and charge bhi karsakta ek soket se... Flying time bhi jada milega
@ElectroRetro3 жыл бұрын
Can you please tell me in English.
@bhargav_gor3 жыл бұрын
@@ElectroRetro can i use this battery and bms module in drone...!!!
@ElectroRetro3 жыл бұрын
I don't think so because this battery is little bit heavy normally drones use lightweight Lipo batteries.
@piotrlucky50764 жыл бұрын
Is the middle serial connection supported by bms in this connection ?
@yatchikun80694 жыл бұрын
the area in charging also the area where you conmect the appliances?
@ElectroRetro4 жыл бұрын
Yes it's same.
@dabobb14744 жыл бұрын
Would a normal 12v adapter work or u need a lithium charger?
@ElectroRetro4 жыл бұрын
Normal 12v adaptor will work
@jlistdiy3 жыл бұрын
can i use a 19 volt charger or would that be to much?
@ElectroRetro3 жыл бұрын
No, you can use 12.6v - 13v.
@jlistdiy3 жыл бұрын
@@ElectroRetro ok thank you
@ElectroRetro3 жыл бұрын
Welcome 😊
@test-1933 жыл бұрын
@@ElectroRetro Do Not use a charger higher than 12.6VDC!!!!!! You will overcharge the lithium cells and possibly create a fire.
@rudolfzaris6753 жыл бұрын
Nice project, How do you will charge this pack? Thanks.
@ElectroRetro3 жыл бұрын
You can charge this pack using p+ p- point in bms.
@rudolfzaris6753 жыл бұрын
@@ElectroRetro OK , but with regular Li Ion charger, or with something more special?
@ElectroRetro3 жыл бұрын
You can use any charger with output voltage of 12.6v to 13.6v
@rudolfzaris6753 жыл бұрын
@@ElectroRetro Hi, again:-) will it work also with this BMS? 3S 40A Enhanced 18650 Charger Lithium Battery PCB BMS Protection Board Module 2 www.aliexpress.com/item/32835890976.html
@junardie5613 жыл бұрын
@@ElectroRetro how many amp should the 12v charger be
@nicholassatria80314 жыл бұрын
how much the current will it produce? 12 Volt 2 A?
@ElectroRetro4 жыл бұрын
5000mah
@nicholassatria80314 жыл бұрын
@@ElectroRetro so ity can powered up a 12v 2A devices?
@ElectroRetro4 жыл бұрын
@@nicholassatria8031 yes
@nicholassatria80314 жыл бұрын
@@ElectroRetro oke thankyou bro it really help me
@angelffalcon31343 жыл бұрын
Current is not 5000mah. That's capacity
@SanthoshKumar-qj5sc5 жыл бұрын
Good video
@arjakegado45922 жыл бұрын
Sir can i use 22 awg wire for wiring the battery and use 16 awg wire in main connection?
@ElectroRetro2 жыл бұрын
Yes
@arjakegado45922 жыл бұрын
@@ElectroRetro ilang ampere po yan?
@ElectroRetro2 жыл бұрын
6 to 9 ah
@arjakegado45922 жыл бұрын
Yung 16awg wire sa B+b- at yung 22 po ay sa battery na icoconnect kopo sa bms pwede po? gusto ko lng po kac makasiguro
@ElectroRetro2 жыл бұрын
@@arjakegado4592 yes, you can use that.
@newbie1014 жыл бұрын
3s means you are only taking advantage of 30% out of 100% battery?
@ElectroRetro4 жыл бұрын
3s means 3 cells in series connection
@newbie1014 жыл бұрын
@@ElectroRetro Thanks.
@rusenalikoroglu72353 жыл бұрын
My master is a good work, but there is a problem. I couldn't exactly see which one where you soldered the cable. B 1 B- B + B2. I couldn't see where you connected them. I would like to watch a video.
@ElectroRetro3 жыл бұрын
0:23 connect like this.
@rusenalikoroglu72353 жыл бұрын
Okay, my master, I saw it when I looked well, but I have B3 on my card? Where would be in B3 batteries? I would appreciate it if you please inform only where in batteries.
@ElectroRetro3 жыл бұрын
I think you are using 4s bms board.
@rusenalikoroglu72353 жыл бұрын
Exactly, I could not understand B3 on the bms card, but thank you for your reply.
@axlcrisjohnlimpin37384 жыл бұрын
if you charge the battery at discharged limit... how many hours to know when it's fully charge using that ordinary 12v power supply?
@ElectroRetro4 жыл бұрын
2-3 hours
@axlcrisjohnlimpin37384 жыл бұрын
@@ElectroRetro me your new subscriber... thanks.... 😁
@ElectroRetro4 жыл бұрын
Thanks a lot bro.
@arjakegado45922 жыл бұрын
Hello ulit sir, pwede po bang mag lagay ng isa pang pagkokonekan? Yung isa po ay para sa pagchacharge at yung isa naman po ay para sa appliances pwede po ba?
@ElectroRetro2 жыл бұрын
Yes you can
@arjakegado45922 жыл бұрын
@@ElectroRetro pwede po bang gumamit ng awg22 silicone wire ? or mas better po kung copper wire?
@ElectroRetro2 жыл бұрын
@@arjakegado4592 Both will work fine
@arjakegado45922 жыл бұрын
@@ElectroRetro ah thank u po wait kopo nxt vids nyo
@ElectroRetro2 жыл бұрын
😊
@alexandrutheodor4268 Жыл бұрын
1:25 bro, dont touch me with this
@ibrahimbalouch40283 жыл бұрын
How can i get bms??
@ElectroRetro3 жыл бұрын
You can purchase online or in local electronics store