DIY: 2015-2018 Tahoe Fog Lamp Installation Aftermarket 15-18 Suburban

step by step how we installed aftermarket fog lights on 15-18 tahoe, should be the same for 15-18 suburban
If you would like me to post a link for the housing kit i used in this video just let me know
the led kit i used for the kit was www.socalaccess...
it may be illegal to drive with you low,high and fogs all on at the same time oem fogs shut off when you flip on the high beam. may also void some warranty from dealership from what i hear about aftermarket items.
⚠ DISCLAIMER: While SoCal Accessories would like to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. SoCal Accessories is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@Jaron22]

@10:30 best line ever....

[@remialexgreen1180]

Thank you for this detailed video. You have a new follower/fan. Someone already asked if you could post the size of the "add-a-circuit" for that 10 amp fuse you connected to. Thanks again

[@timkaczmarowski8151]

just got dun with my suburban, some very valuable info on here, works like bing fuckio! thanks

[@gulinoteam]

Just found your video for installing fog lights on my Tahoe. Awesome you guys do nice work. Can you give me some info. on the housing you used? Thanks again John

[@djrelek]

Awesome vid socal. Thanks for the guidance. On that pigtail that U used to pull power from the fuse Box. What size fuse did you use for the fogs

[@richardcox1524]

What is the blue wire and it's purpose? The noise in the background drowned you out. Thank you

[@socalaccessories6687]

that's just the extension wire to run one harness to the other the color may be different from one brand to another

[@1jonrd]

I bought mine and it did come with a blue wire. Did you add blue wire and where is it going to and where did the yellow come from?

[@jensencurtis7528]

This is an OUTSTANDING video. I recently purchased some aftermarket fog lights for my 2016 Chevy Colorado WT (it didn't come with lights). Have y'all done a similar install for a 2nd generation Colorado/Canyon? The company that made my lights is DNA Motoring. They do not include directions for installation in their packaging and I cannot afford to have someone do it for me. I would be very interested to see you guys do this on a vehicle like mine. Their hot wires are red, their ground wires are black and then there is a white wire that connects it all together. Any help with my install would be greatly appreciated.

[@socalaccessories6687]

Jensen Curtis no I haven’t but the concept is the same for most vehicles

[@higrosswdnh234]

Great video. I have a 2018 Tahoe. What lens kit did you use?

[@jonienglish3231]

very good video !!! JUST pICKED UP A 2018 Tahoe LS and will upgrade

[@andref713]

What is the fuse that you used for? is that a miscellaneous/run crank fuse to start the engine? I just want to make sure it's ok to use and won't cause any issue.

[@RIFFRAFFMcGRIFF]

FYI the LED kit from the link in the description don't fit the lens housing, or ceil.

[@pop5.508]

Hi Hello, my car is GMC I would like to ask you is it the same as your fuse number 10 ?

[@DPCPhotog]

Can you provide the part number for the correct fuse tap? I went to Lowe's and Advance Auto and they don't carry it. I showed them the fuse size I needed.

[@DPCPhotog]

Nevermind, found it. For those looking for the correct fuse tap, it's the Bussmann Fuse Tap HHTR ATR

[@humbertopacheco6657]

Where can i buy these fog lights? I'm looking for the ones with the H11 SIZE

[@humbertopacheco6657]

Do you have the link for the fog lamps. Im looking for the ones with the H11 size. I only find them with 880 or H3 size

[@DevillSRT]

Did you need to use a decoder when you installed led on those aftermarket fog lights?

[@socalaccessories6687]

no you don't

[@LuxAdvisor]

Hello - Can you tell me what wiring kit/harness you used to do this install? Thanks Andy

[@maykolshadow3661]

hi i have a 2019 Suburban and i bought the same light for Ebay so buy say 2015 to 2018 but the seller told me should work in 2019 but never try it.My question is this lights can fit in my 2019 ? please let know before waste my time thanks

[@tyler2610]

Do you know how to remove the chrome trim bezels around the fog lamps in a 2015-2020 GMC Yukon? I want to add the chrome tow hooks to mine and the fog lamp bezels have to be removed in order to switch out the panel for the tow hooks and install them.

[@sergiohernandez4242]

How much does this cost Labor/parts

[@AFBlackmount]

Hello, you get the kit from Amazon?

[@charlieangels1982]

You never put the link for the lights you used

[@socalaccessories6687]

they are made by a company called Spec D Tuning

[@nesco7615]

How much do you charge for the full install with parts

[@socalaccessories6687]

N Esco cheap parts and labor without the led kit is like $180 if you want a led kit for them it’s $45-$80 more depending which kit you want we have a few different ones

[@miguelgomez63]

What fog light kit did u use can u post a link

[@jordyperalta6833]

Aftermarket housing kit link?

[@ilmods]

Will this kit work on the PPV(police package) ?

[@hustleman4880]

Yes, did you ever install? I plan on doing this to my 18 ppv one of these days. Don't use the switch that's included though. You can easily run a wire to the fuse box and upgrade the headlight switch for $30. That way it works and looks factory.

[@Samson4G]

new subscriber here, will this also work for a 2018 Traverse? Hope you can get back to me on this, thanks.

[@alexanderjacobcarlos1731]

Liink for the house kit, and wonder if it fit for 19 Tahoe? TIA

[@CM-qn4io]

Alexander Jacob Carlos check out ebay and amazon, there are bunch of them. Yes, they will fit.

[@jrbass62]

Good vid, but that's a cheezy switch buy a factory and do it professionally

[@socalaccessories6687]

I have a z71 comes factory this is a customers car to show people how to add the aftermarket ones