How To: Install or Replace 2015 Tahoe HID Headlights

[@cuttilo2122]

Wait, did that Balis not come originally? I seen you have to mount it does that mean there wasn’t a place that you are mounted it from when changing the bulb?

[@owenevans3834]

This guy said he was removing the passenger side first when in fact it was the driver side he did first. He also said you turn cap to the right to remove it when in fact it’s to the left.

[@CvC3169]

Why did you skip the air box part?

[@TheKingOfHalo]

Does that year use the same projector for hids and halogen bulbs? I know they were both options from the factory. I just don’t want to cause glare when I put an hid bulb into my 2017 that originally came with halogens because the projectors are different.

[@gregmcintosh232]

You started on the driver side. That's the side with the washer fluid fill aka the left side of the vehicle. No problem.

[@Yavyuuu]

Why you dont show how to remove air box step by step? Cause i pull apart every parts except the sealed silicon plastic thing in the bottom of the box! The most annoying piece that i couldnt remove

[@xmayhem420]

Did you need a relay harness when you installed? I installed mine without one, light would power up then shut off.

[@arturoorozco8903]

What did you do to fix the problem.... I installed mine , did the test everything worked fine.Then at night when I turn the truck they turned on then turn off. Drove home with my high beam on and when I got home I check my low beams they where on. Looks to have a delay turning n on.

[@xmayhem420]

@@arturoorozco8903 I called the manufacturer of the HID kit I bought and they sent me the correct ballast that works with DRL. I would double check to make sure you don’t have a wire in the wrong place

[@djmikedoelo]

Did you mean Driver Side when you started

[@gregmcintosh232]

If you are dissecting your harness to make the connections work you bought the wrong setup. Everything should flow properly without compromising the integrity of the wiring. This is a low budget setup example.

[@reviving7948]

i dont understand how yours is working, mine is turning on but then go out....they're brand new as well.. also the shop said im going to need a relay kit.. but we have the same year tahoe.. so why dont you need one????.. also my pins in my HID kit is close pins ... but the relay kit they gave me is wide pins?? so what the fuuck?

[@mconley12345]

nice to show airbox removal hardest part

[@Hidlightreviews]

Yeah it was! Glad it was helpful

[@chrisflood7178]

No one shows changing the high beam bulb!

[@masonlopez7913]

How do I do the passenger side

[@gregmcintosh232]

Further, 2015-16-17 Tahoe suburban etc. no dash cancel is necessary but a relay is a must along with power from the battery. This guys setup has factory wiring fried by now.

[@lesliehaymond8223]

Was going to add 9005 (high beam) HID to my 2017 Tahoe. High beams very yellow from the factory, but did not want to add any additional wiring items or create issues. Had added HID to my 2007 Tahoe without any additional items. Is this still a concern?

[@juvenalzendejas4996]

i just installed HID lights on my GMC sierra truck 2015, but there seems to be a glitch pls assist.. we start the truck, but as drive they go off

[@Hidlightreviews]

+Juvenal Zendejas - Look into getting a relay harness. Also, here are some common hid problems and fixes, let me know if they help at all: hidlightreviews.com/common-hid-problems/

[@Fiya_gamez]

Did you ever get a response from this on any video? Same issue..

[@markgibson5163]

You didn't show with the lights look like when they're on after they warmed up or cool down

[@javiermartinezjr4782]

i have a sngl led kit..and when i put it on drive lights turn off. help please

[@Hidlightreviews]

Hey. Are you using a relay harness?

[@robertscott440]

I just put hids in my 2015 Silverado with the truck off and switch turned on they some on just fine as soon as I start the truck they stay on about 10 secs and go out

[@Hidlightreviews]

+Robert Scott - A few questions - What HID kit are you using? Did you install a relay harness? Are your headlights on DRL(auto) or On?

[@ትኒጧትንኝ]

Would have been nice if we were shown a before and after illumination of of the headlights at night.

[@iwarshaty6494]

what happened to dust cap ? because some wires will be run out !!!!

[@Hidlightreviews]

I noted the wiring in the description. (My bad...) You need to drill a 1" hole in the back of the dust cap to run the wired through

[@iwarshaty6494]

OK, now it is clear. In fact your explanation is brief but clear. I advise you to fill the one inch hole by anything just to insulate inner headlight against dusty or rainy weather. Thx,

[@gregmcintosh232]

The hole you drill in the dust cover should be close as possible to 24 mm. Just shy of an inch for a tight gromet fit.

[@tygerlopez8480]

Gracias

[@ashrafal-sindi807]

thank you

[@xIGOTUx1]

Did not help at all.