DIY Arduino drone project| 3D printed DJI Tello clone, MPU6050, NRF24l01, MS5611 (Part 1)

[@patrickboyd8368]

@minilab3d is there anyway to fix the links so we can get them in 2024? Every attempt says the site can't be accessed.

[@richardchinn3308]

Love this little drone and would like to build it myself. I am from South Africa but seems to not being able to find the stl files for this. If you can provide me with a better link it would be awesome. Good work and keep up with it

[@aberateklehaimanot9804]

thanks for sharing,but i read the RF Nano distance is not great,is that true?

[@minilab3d]

well, the range is same as the other NRF, 100 m if you use the NRF24l01 with antenna for transmitter and about 800m - 1Km if you use the NRF24l01 with Power amplification (Antenna). but due to interference it can be less. The range can be fine for small drone like this. Probably not good for RC plane

[@SmallC]

how to get the drone components.

[@technicala.s.k786]

Sir i have made drone but one motor is not rotating when i give full throttle by joystick then it is rotating slow as compared to other 3 motors. What will be the solution plz???

[@Notdeba]

Check out the motor gear

[@AwaisKhan-vh8kz]

Hi bro How i connect mpu6050+ms5611 to ardiuno nano

[@minilab3d]

Connect SDA and SCL of MPU6050 & MS5611.. to pin A4 and A5 respectively of arduino

[@epochal9374]

@@minilab3d didn't understand MPU6050 SCL--->A5 SDA--->A4 MS5611 SCL--->A5 SDA--->A4 like this? are they go to the same pin?

[@make_yourown9711]

Cab i get link for propellers

[@jaydeepsharma3387]

Will it realy fly . Should I make this please tell me

[@minilab3d]

Hello, i have already did a test and it is flying but i would recommend you to watch the complete video series before attempting to make one.

[@PrashantKumar-nz8hq]

BRO WHAT MOSFETS ARE YOU USING FOR ESCS ?? ALSO WILL THAT WORK WITH 7.4 V INPUT

[@minilab3d]

A2SHB... yes.. it will work with up to 20V

[@PrashantKumar-nz8hq]

@@minilab3d U mean SI2302 A2SHB N-CHANNEL? .. BRO it burnt at 7.4 V only .. so i asked for 3.6 it is working gud

[@minilab3d]

@@PrashantKumar-nz8hq hello,yes s12302, well according to the datasheet it works with up to 20V. It burns out, its not the voltage, but the current causing it. It has a maximum current of 2.9A. So if u are using a motor that drawing more current than that, then it will burn out, altenatively you can use S12306 A6SHB which has a max current of 3.5A

[@PrashantKumar-nz8hq]

@@minilab3d A6shb .. not available anywhere bro ... Any I built World's Cheapest Agricultural Drone ❤️ watch it .. kzbin.info/www/bejne/fWKoZX9sgtiNm8k

[@jokoproject]

link corrupt bro

[@somnathpal8697]

Next video apply please

[@minilab3d]

Next video saturday

[@909boos5]

Tui English koitika sikst

[@shravannanjunda]

I can't stop laughing listening to your pronounciation .....pls do something

[@minilab3d]

😂😂😂 Trying to improve bro 😂 but thanks😄

[@nadiircassim5864]

Come on dude, he’s doing his best and besides the way he’s talking is much more understandable than many videos I’ve seen on KZbin.

[@sanchezmalber]

👎👎👎👎👎👎👎👎👎👎👎👎👎