DIY Bluetooth Speaker Using Pallet Wood

[@KingMinhvuong]

Hi friends! Would you like me make more video like this?

[@MrBrymstond]

Great build. Do you notice any unwanted noise or ripple in the music? If so you could add extra (2) 50v 4700uf capacitors in parallel and a 60v 1uf filter capacitor at the output of the boost, but honestly I would rather go with a 6 or 7S 2 to 4P battery pack and use a good quality buck or even a buck / boost (SEPIC) converter with a Current adjustment as well as a voltage pot CV / CC and use the same idea with the capacitors to eliminate ripple and noise or just use the 18.5v and a buck for the Bluetooth. I never liked the idea of AC to DC or DC to DC converters with audio, but great for charging batteries.

[@alamdarnaqvi1064]

You are the best please make more speaker build videos like this

[@rallyecupra2]

as always you worked very well. I think it's very good if you make more of these videos. Reuse old things as the palette is great. You do a lot of work with your videos, very well produced.

[@olegunderson]

Absolutely

[@CharlyLucky0397]

Excelente, mas videos asi por favor!!!

[@AndyGherna]

Well done. Took your time, pre-drilled all the holes, thought through the component layout inside the box, worked the wood properly and cleaned up the rough parts. So many DIY speaker videos are hard to watch because the builder isn't careful with what they're building.

[@KingMinhvuong]

Thank for your comment.

[@Bobby_Milli_n_Mind]

No words expressing my feelings... you a Genius man... hats off! Much love, God blessed you!

[@KingMinhvuong]

Thank you!

[@brianbarongo7519]

I can hear the crickets in the background towards the last half of the video. We appreciate you working late into the night to give us this!

[@oranidequino7962]

Maganda na ang pagkakagawa pulido na mkikita mo ika nga Quality pra skin 100% sana mkabili ako sa inyo niyan palo china wood bluetooth speaker ayos 👍👌

[@deusimarferreiralemes2784]

Trabalho simplesmente magnifico, do começo ao fim de materiais velhos, reaproveitaveis e finalizando com um tecnologia em todos os itens e um som de excelênte qualidade! Parabens pela competencia.

[@adrianserradilla9446]

That is so satisfying to watch, I missed building stuff and watching this gave me a bit of satisfaction. Thank you.

[@enricas3295]

Congratulations friend .. rescue abandoned wood from a pallet and do a magnificent work. A work of masters👍

[@ThatGuyBW]

The box build got my thumbs up, but the component swap out at the end got my subscription. Great vid.

[@alirezaojifard4368]

Hi, I always try to learn and learn and always do the cleanest work in construction and repairs, and I have to admit that I was very happy to see this video and show your art, and I give you a score of 100. like

[@rustamtaghiyev2722]

hi alireza i think in this site u will find what u loooking for . i foung on internet and tried . there is 16000 wood working idea thx me later

[@robbyalmendrez1750]

So nice to work on this kinds of project when you have the complete tools to assist you. nice video.

[@albertovaldivia4042]

the Knowledge and the Tools :) greetings from Peru

[@dp11750]

A very nice job of working with your hands to build the cabinet and then also complete electrical knowledge in putting together the electronics.

[@mkmkl66]

Sir, as an audio/visual technician i have to say.. thats a pretty solid job done there! Congrats! nice job!

[@jowosfkad387]

Anyone who is jealous of seeing his work equipment? All new.

[@SONGSTICKS]

Not jealous as such, good for him !. but as soon as it got to the planer thicknesser at the start though, I thought... well, that's me buggered then :O) Great looking and sounding speaker though huh !

[@伊藤立志-o5n]

さ

[@ПавелСаморезов]

я в восторге от видео, с какой же любовью все сделано! Великолепно! однозначно лайк!

[@vladimirnikitin2121]

Полностью согласен, такой хендмейд, столько работы сделано, а еще и все это записать и смонтировать! Очень круто! Интересна стоимость сего девайса хотя бы по себестоимости...

[@kiellaxpro364]

@@vladimirnikitin2121 себестоимость при наличии оборудования копеечная, если конечно динамики или усилитель не стоят астрономических денег, а так трубу ПВХ найти на помойке можно, там же дерево с палета, траты только на эпоксидную смолу, клей и может лак(или морилка, если вы решите сделать её красивой, самое главное это нужно оборудование, тк сделать доски ровными без машины из начала видео(через которую он прогоняет все доски) будет практически невозможно

[@vladimirnikitin2121]

@@kiellaxpro364 да причем здесь нахрен оборудование? вся обвязка стоит безусловно денег. и динамики и все платы.... вот теперь не поленился. только динамики стоят 6к. я думаю итог превысит 20к только по оборудованию. ПВХ труба, палет, эпоксидка, клей морилка да серьезно чтоли?

[@redanymusic]

@@vladimirnikitin2121 в описании ссылки на комплектующие

[@vladimirnikitin2121]

@@redanymusic ну вот и откройте их. Посчитайте. И не пишите глупых, очевидных ответов

[@RangerGorde]

WOW! Not your first rodeo! I love your attention to details of vibration and buzz control in cabinet...Also your choice of changing cap and such was spot on!!!!! WTG! Cheers!!!!

[@ontime8109]

i'm really impressed by one touch soldering, just wow!

[@ismaeljgomesf6299]

:O I like how it looks, it is a first class job, they made me want to do one, then I remember that I don't have the tools or the money and it passes.

[@rolandsequeira]

you can get the wood cut from a timber/ply store easily

[@paul.p.smellthetruth2667]

Or get a very cheap china box out of wood and the tech he used

[@ДмитрийСолодуненко-ш5ш]

@@rolandsequeira the LP

[@asmopasif2025]

@@rolandsequeira yed

[@mr31337]

This video just goes to show that if you have great skills, lots of free time & expensive tools - you can save money. Who knew?

[@SilentKnight43]

It's not all about saving money. It's pride in your own workmanship. And it can all be done without the expensive tools.

[@stealo9251]

I don't know if I would call it saving money he has $350aud just in parts let alone the time to do it

[@villeneuvewoodworks]

@@miltonb4522 Exactly! Each side job I pick up a new or "new" to me tool or bit to make the next job easier.

[@gagailos]

Maybe the best DIY video for speakers in youtube. Great outstanding work.

[@KingMinhvuong]

Thank you!

[@Уссурийскийтигр-д5у]

Как хорошо, когда инструмент супер и руки прямые! 😁🔊👍

[@IoannHammerFall]

Только не в этом случае

[@Уссурийскийтигр-д5у]

@@IoannHammerFall А что не так то?

[@IoannHammerFall]

@@Уссурийскийтигр-д5у изготавливая акустику прикручивать саморезами так себе затея, зачем тогда клеить корпус было? Два низкочастотных динамика в одном корпусе вообще лажа, ещё и фазоинвертор один на два канала, причем никто его не рассчитывал, это факт.

[@Уссурийскийтигр-д5у]

@@IoannHammerFall Это просто переносная колонка для простого люда, а не HI-FI стерео для ценителей, это понятно. Просто человеку захотелось сотворить своими руками.

[@IoannHammerFall]

@@Уссурийскийтигр-д5у ну так сотворил, молодец.

[@ephyman78]

How many of you are watching this while lockdown?

[@Terramorfios]

Из России тоже наблюдают..

[@kamnglnd.5030]

Me,Nagaland

[@pcgamex912]

I guess only you

[@Rem777rich]

Я из России. Северный Кавказ. Тоже смотрю.

[@kamnglnd.5030]

@@pcgamex912 I guess u watched it too

[@АлексНесогласный-у9з]

Красиво. Но антенну блютуз можно было внутри колонки расположить, деревянный корпус для неё не преграда.😂😂... На пикнике в лесу её можно легко отломить...

[@sergeytsobenko2023]

а розетку в лесу ?

[@ГеоргийМелех]

@@sergeytsobenko2023 аккумулятор внутри колонки

[@АлексНесогласный-у9з]

@@sergeytsobenko2023 Там же аккумулятор есть... Иначе смысла в этой машине нет.😂

[@williamortiz1618]

I don't know why so many dislikes, your work is very professional, impressive

[@locsecs75]

Simply jealousy, hes all Makita :) great video

[@ИстинныйВоин]

Отличная работа но меня больше поразило что,ПИПЕЦ у него инструментов дома,я офигел,чего только нет..

[@НиколайВасильченко-т7ц]

Я тоже на это обратил внимание , слюной разов восемь давился :)))

[@ИстинныйВоин]

@@НиколайВасильченко-т7ц во во и я о том же)

[@NoCaminhodasPedrasDetectorismo]

Wonderful! I liked the whole assembly process, the organization, the quality of the components!

[@KingMinhvuong]

Thank you!

[@SerialGrillerCyprus]

You brother should do this for a living. Simply amazing.

[@cenariusbg]

Nobody would buy this BT audio box. Just check the price of the materials .... After tax and some minimum wage, this speaker goes for something like $1000 ...

[@AntonySimkin]

@@cenariusbg sadly the world we are living in is so buy and throw...

[@cenariusbg]

@@AntonySimkin No, paying $1000 for this is stupid :) It has nothing to do with buy and throw.

[@AntonySimkin]

@@cenariusbg but where did you get this number?

[@cenariusbg]

@@AntonySimkin I opened all the items in AliExpress and calculated the price.

[@danmar007]

Looks and sounds great. I guess with all the electronics you had to buy it's good that you saved money on the wood!

[@josipmarkovic4739]

Cleanest wooden bluetooth speaker build I have ever seen, good job☺☺☺

[@KingMinhvuong]

Thank you!

[@KaranSharmapersonal]

@@KingMinhvuongsir, the moment you tied those wires with zip-tie you just got a subscriber. 😎👍 Good work keep making stuffs like this.

[@นงคราญพันแสน-ห3ษ]

@@KingMinhvuong ฝ ส.ฝฝ ฝ ฝใใใฝฝฝ

[@Dogo24h]

You have made good use of scrap wood!

[@ZIMZIMMA132]

and other stuf he is smart man

[@uttamkamarshil1523]

;ln. fvvb by ac8

[@sengcarreon2309]

How much cost

[@SaSa-oc9ut]

កធថចម

[@itsWhoosh91]

This wood isnt so bad, it carrys millions of dollars of products. :)

[@anjuvijay2668]

This is first video in my life i watch the whole video from 00:00 to 29:44 Amazing Bro 🔥

[@KingMinhvuong]

Thank you!

[@AbdiPianoChannel]

After the cap replacement the woofers started dancing. Good job bud. I love your final work.

[@valentinhristev174]

Amazing job man I love all the handcrafted wood part and the electrical one. Make more videos

[@kurakuracomel7130]

Perfect job man.... Music please..... 1 =ON&ON song.... 2= alone by marshmellow.... Thanks

[@BETOBIKECONCEICAO-sc6nc]

Trabalho excelente do profissional, sabe muito usar cada ferramentas, uma benção!!!🙏🙌

[@shawnstone4949]

So far…I’m loving the edits!! Nice work! Still watching…

[@KingMinhvuong]

Thank you!

[@bruno6986]

Incrível! até compraria ficou muita linda a caixa 🇧🇷

[@KalopsiaDelk]

Take my money, bro. Great job.

[@madeshidehartadwiguni5884]

When you have all of equipment you can make some special stuff. Hope someday i can have wood workshop with all equipment.

[@wb3213]

you should see what the japanese can make with hand tools!

[@adauridavid7760]

Excellent work must always be recognized and differentiated as such. Brilliant job!

[@Sp1der44]

Really impressed with how nice the finish and attention to detail was on your build - very clean! I also liked that you made really good effort to seal the various areas from air leaking through the gaps which really helps improve a speakers performance. Liked your Video! - MM in Denver

[@Atlaspar]

Hello! do you sell this model? for shipping in Brazil? I'm interested.

[@KingMinhvuong]

I'm Sorry. I jusst make for play. Not for sale. You can buy materials in description of video to buid one yourself. Thank you!

[@wobbler6372]

As much as how good this looks . Thank god we have amazon

[@khuongnguyencong7942]

Kênh diy loa đỉnh cao chắc là nhất vn . Chỉ xem video của bác giờ e đang bắt đầu nổi máu rồi. Hi

[@samisulaiman7967]

you are genius man , I want to buy these speakers but I want to add mp3 decoder with am fm an sw1,2 ,3,4,5,6,7 with recording feature and mic and mixer , thanks

[@k.d.bulaong1725]

Quarantine got us watching some pretty ramdom things 😂

[@SlickDanger]

Truth lol

[@techtalk1679]

😂

[@jeanlubin5864]

Yes but this video is pretty interesting.

[@eddwinamigaschavez.4828]

nola

[@elleowtf9268]

.

[@sanyasanya3552]

Такое впечатление ,что все оборудование было куплено специально для съёмок фильма, новое и не разу не использованное.

[@serhiikharchuk1657]

Непонятно, чем мешали сучки? Лучше дыра на передней панели!

[@ЕлисейИзотов]

@@serhiikharchuk1657 дерево немного подсохнет, а вибрация (со временем) заставит сучки плясать под музыку, из-за этого появится не приятный дребезг.

[@airman8558]

Вообщем тоже думаю такого плана себе сделать, деревяхи есть, осталось только всех этих циркулярок накупить и можно приступать😊

[@ВикторБортновский-р3к]

Странное впечатление.Конечно всё было подготовлено.

[@АлександрНемиров-ъ4ц]

@@airman8558 Ага, и встанет такая колонка тысяч в 200, с учетом покупки распиловочного станка, рейсмуса, торцовочной пилы, фрезерного станка, сверлильного станка и всякой мелочевки 😂😂😂

[@naangalumstatusvaipom5717]

I'm from India my friend your a gift this world how can you do you did becomes more better ideas wow .... I really appreciates.👏👏

[@Илья-ц7ш5ч]

Великолепно. Я тоже думал сделать что то подобное но только из цельного ствола дерева Кедра.

[@schura1973]

И украсить камнями от сваровски!

[@vh9040]

This is great, thanks for sharing. Are you located in Vietnam? Thanks!

[@thuyen2001]

A này VN thì phải

[@theqyn]

Anh này là Việt Nam! Tên Minh Vương nhé

[@vh9040]

Anh Minh Vương ở đâu ở Việt Nam? Mình thì ở Hà Nội, nếu gặp được thì hay quá!

[@carloslessa5409]

Projeto lindo!!! Muito TOP!! Parabéns pelo trabalho e pela ideia!! Parabéns!

[@agona-piesie6604]

You are full of wisdom and skill, Amazing ,watching from Ghana

[@Radfli]

ну с таким подходом можно было и готовых буковых досок купить чего корячиться-то с поддоном так он вроде ещё и из хвои а она разве в акустике гуд?

[@Roman_Ossetrov]

в принципе да, из сосны короба делают, а из ели вообще пианинки всякие))) а поддон вполне себе стабилизированая древесина(сарказм))) но сделано очень, доски от поддона как раз винтажности придают

[@Alex_Ryab]

@@Roman_Ossetrov считаю что о качестве звука речи и нет, просто бубнилка классная...принцип расчета короба неправильный ,

[@brandbmw6642]

@@Alex_Ryab бубнилка это в магазах продают , китайские жбл . а тут как не крути стерео и трехполоска. короб рассчитывать и делать под какието басы нет смысла , размер не тот .. а сам короб сделан правильно

[@schura1973]

@@brandbmw6642 принцип правильный, а размеры нет.

[@brandbmw6642]

@@schura1973 вопрос видимо в портативности

[@РоманДраников-з8ш]

Хоть я и в электрике 0 )) но на одном дыхании просмотрел .Красавчик

[@товарищли]

скажу больше -меня застегнуло и я буду делать эту херотень !!! знать бы на верняка ,что не будет диссонанса ..

[@tony359]

brilliant! Just one suggestion, sticky pads on wood will probably come loose at some point. I recommend a different approach!

[@joaquinvaladez2070]

Super Glue better . Hot glue. You made a Beautiful Speaker.

[@abitra1481]

凄い、凄すぎる スピーカー制作の動画何本か見たけど、 こんな事ができる人がいるんだと、感動です‼️ 出来れば、使った部品のリストや使用目的など公開してほしいです。

[@Avenged_07]

This kind of video makes my day so very inspiring. Amazing creativity. Kudos to the creator! 👏 🔊

[@gustavoadolfosilvaquibano6350]

Hello Sr, Thank you so very much, for this video, i recognize your job...It is with passion, really... I do not have all your tool to made it myself, I would...of course, but the point is , that I want to express my fellings about your job, IT IS GREATE, with LOVE and apassionate... Thank for share it...Bye

[@KingMinhvuong]

Thank so much!

[@lien.the-sigma]

@@KingMinhvuong nice job my friend im impressed!!

[@abhijeetsurwase2993]

2 pis my order

[@suratih3185]

hkglulm

[@MaMoHT91]

12:15-12:17 relax sound, need 10 hours version -_-

[@Akufenx]

🤣🤣🤣

[@rcasawi8751]

I like how he shows the diagram of how to connect the wires. It is very helpful and informative.

[@YanFei-zi7mm]

Hi, this is a high quality DIY BT speaker. Thanks for sharing

[@KingMinhvuong]

Thank you!

[@Саня_С-2016]

Скоро весна , вот молодец уже скворечники строит.

[@ИВАНИВАНЫЧ-э7п]

Ахах)))

[@nallepac01]

I LOVE IT. HOW LONG WILL LAST THE CHARGR?

[@KingMinhvuong]

2-3hrs.Thank you!

[@ravshanshoaliyov4058]

Койил хакики талант габ булиши мумкин Эмас 👍👍👍👍👍

[@gojibroccoli6914]

I love the fact that you show cleaning also after you made a mess- lol

[@jorguegomez1995]

@Me Youkjkkjkkkkkkkkkkkkikkkkikikkikikkkkkkkkkkkikiikkkkkkkk9k9k

[@jorguegomez1995]

9999999999

[@jorguegomez1995]

p00ppp9999999000000

[@jorguegomez1995]

0p09

[@erickplaza5194]

Amazing

[@lamba_fps]

Fascinante o trabalho, parabéns pela dedicação!!!

[@ZAEC39]

Это конечно всё хорошо, но за эти деньги, можно купить оригинальную колонку JBL. И не париться. Но за DIY однозначно лайк.

[@ЮрийКожевников-й4х]

без обид конечно,но JBL это полное говнище для пиздюков и как ты не скажешь за эти деньги, 7к за 2 динамика в пластиковом корпусе, а тут чел собрал полноценную трёшку, пусть из досок, он бля даже сделал для сч отдельные короба и звукопоглатитель, у нас заводские колонки так не делают, а люди покупают и хавают это дерьмо и согласен с тобой, за DIY лайк))))

[@Handy_Randy]

Such a beautiful and clean build! Amazing work my friend, truly inspiring. 👌🏽👏🏽💯

[@arnaldogonzalez1]

1:40 finally, I see someone that wishes to keep their fingers around.

[@chrisally6286]

Yea friend,wish I had all the tools that you have so I can share my craftsmanship with others

[@trivo5863]

You can manage to get those yourself soon or late. The most important thing is your passion.

[@danmar007]

Very popular excuse I've also used. :-)

[@AriefGunaw]

Reply

[@fullblownredneck9623]

Fresh wood would have been the least expensive part of this build.

[@yt_thorben]

Interisting to see he used the good Homepod high excursion woofers! NICE! Maybe use them in more projects! Would be nice.

[@tiktakvlog2721]

Genius mind with perfect tools...amazing

[@RamGundapu]

Great Stuff. Great Skill. Thanks so much for sharing with us.

[@TECsta76]

6:15 Be musical and start harmonising the tones into a little tune.. 👍🏻

[@opinionated_one8692]

I was thinking of that! If you meant like the making of the box like the drill, sanding & sawing sounds...Lol

[@KingMinhvuong]

Haa. The duck of my neighbor's house

[@cezimarmedeiros8491]

Vai tomar no toba kk

[@daniloopena4605]

wow verry nice ,ang ginawa mo jan , napakalinaw jan ang tunog ser,

[@JEKKOF]

I love your work, I still hope you can make a modification of the logitech z506

[@KingMinhvuong]

Thank you!

[@javierzavala4312]

Cuando yo estudié sistemas de audio, aprendí una constante: las bocinas para bajos, mientras más grandes, mejor, sin límite.

[@JosephCOrtiz]

Me, maybe i can build this speaker, then he pulls out all those tools and im like wtf, holding a screwdriver and a pair pliers. 😂😂😂

[@enfermeriaenUSA]

I like the natural sound of your chickens.

[@amarmuniz1]

Perfeito cara! Parabéns! 👏👏👏

[@-C.T.-]

Good, but I can make one in half the time and only using matchsticks.

[@pavlomiklashevych1758]

Why didn't you hide antenna inside? And you can find voltmeter that better fits for this "box"

[@mr123]

¿Cuántos de ustedes están viendo esto mientras están encerrados? 😏

[@marcioornelas5967]

É, ficou muito bom, más com todas essas ferramentas novas de qualidade fica fácil né.

[@Marlington]

Pois é cara, maquinários de primeira a um preço acessível, falantes tbm.Aqui no Brasil só podemos olhar, quem teria todo um maquinário desse?

[@Wevertonwj]

@@Marlington o jeito é encomendar do cara kkk

[@Wevertonwj]

Já trabalhei com essa máquina verde faz um barulho do crl

[@Marlington]

@@Wevertonwj Vcs conhecem alguém aqui no Brasil que possa fazer um projeto desse? Sou da Bahia.

[@Wevertonwj]

@@Marlington mano qualquer um que mexa com som ae na sua cidade faz só que vai sair meio caro vi o valor das peças nenhuma fica abaixo dos 30 conto fora a mão de obra do companheiro quem faz móveis tem todo esses equipamentos ae aqui na minha cidade o cara que fazia foi preso

[@jorgemoreno7206]

Excellent my friend, I want one but I don't even have the tools, if you can see it?

[@bseaken]

Its way cheaper to just buy one. Just the bluetooth board and amplifier is almost 60 bucks. You can buy a good bluetooth speaker that has a 10 inch speaker and 2.5 mid and tweeter from Walmart for 79 bucks

[@gioredrossi]

since it is a device designed for transport, it would take speaker protection grilles.

[@hugodiaz163]

I think it's safe cuz the cones are sink in

[@idkdrew]

not necessary if they are indented

[@lengmuzik6333]

Definitely need some speaker grills .led will make it look modern. Good job though

[@antoniomorais4840]

Quanto tá uma caixa dessa preta

[@doubleeagle9722]

Excellent piece of work. I would like to see an underwater speakers.

[@zachiotis]

Great work, definitely, the downside : first of all the tools (they cost much) and am assuming around not more than 8 hours of work not including waiting time for the glue, and the approximate of $250 US dollars for parts. Sure a challenge for whoever looking to build something himself.

[@karencuadra5899]

Predlcaslo

[@5Rastaman]

How much is all the electronics for that?, and would love to see more, keep up the good work 👍

[@mkhnadeem9149]

What is price

[@eddwinamigaschavez.4828]

morro

[@terrydavenport48]

Alternate title: "See how many different woodworking bits I have!"

[@jeffersonbautista1837]

No

[@cvermaning9952]

they are very cheap these day's , cost me a small fortune 30 years ago!!!

[@ggkk3697]

😘😘😘😘😘😘

[@suvankardas6552]

Very satisfying and very clean work. So beautiful Bluetooth speaker ever.

[@georgedevassy1490]

DIY I think the meaning has changed Specifically this one so simple and fast to do it 😁😁🤣🤣

[@patrickmaximiliensery1553]

ERY HAPPY FOR THIS GREAT JOB

[@arch0555]

Just watching this to pass time because my state is in lockdown. ROFL

[@vivekpatil682]

Same here bro😅

[@arch0555]

@@vivekpatil682 haha

[@saifullahkhan8728]

same situation here too

[@marudhubala2002]

iam tamilnadu corona attacks

[@Mehedihasan-bc5hu]

same here

[@Kumar-ce9xd]

An Antic item is prepared Excellent done...… So good.....

[@vincentli3416]

The "How to have a dream and give it up within an hour" series.

[@jornaldanaizalla1632]

kzbin.info/www/bejne/qp6YZ5JugrWpqKM

[@nanarara_]

its how to make speaker (with skill) 🤣🤣🤣

[@lorranoliveira5854]

"quanto ficar uma dessa pra vç entregar aqui em Itabuna???

[@samuelcosta1263]

Cara, o KZbin aí do vídeo e americano, tu que pagar 400 conto de frete kkk

[@lorranoliveira5854]

@@samuelcosta1263 É eu sei q ele é americano ⁴⁰⁰ reais laele ...

[@concursosenemsped]

vem com esse cao que sabia que era gringo nao da forma que perguntou, parece que o gringo la sabe onde e Itabunda vc perguntou como se o cara fosse aqui do brasil inteligencia

[@rafaelzanuti3780]

@@concursosenemsped é cada uma kkkkkkkkkk morrendo de rir aqui

[@rafaelzanuti3780]

Jumento compra uma jbl Xtreme e vai ser feliz

[@Johnsor21]

That looks beautiful, but way to complicated for me to do myself

[@91trunghieu]

Just buy one lol

[@matthewowens687]

Exactly why would I do that myself when I could just buy one like it. buying the parts to build it would probably cost just as much as it would to buy a speaker like it LOL

[@gemini76isback]

great job. The wood works is big thumb up. liked it that you build separated enclosure to insulate out tweets and woofers. Apparently you used two channels. Maybe sound will be better if you put the two big speakers more apart towards two sides of the box and use two different ports ....but probably you calculated and they wont fit that way.