Making a Bladeless Wooden Fan - Scrapwood Challenge ep38

My Premier Project Plans: paskmakes.com/premier-project...
My Free Plans: paskmakes.com/free-plans/
This was one of the most fun projects I've done!
It involved plenty of problem solving, even before I started making it. I think it came out fabulous as I honestly didn't know if it would work. Although, I think a more powerful fan would take it further still and maybe I'll pursue that at a later date.
Thanks to all my Patreons who've had input in this one, encouraged me and gave me great advice!
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.threadless.com
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinphotography.com
M email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia

[@PaskMakes]

I 'm pinning this comment just to address the use of a fan with blades. I didn't name this style of fan 'Bladeless" but it seems very obvious to me why it would be called that, any issue with that seems trivial to me (some comments have even included vulgarities over this point, you just need to chill out a little). If you bought a Dyson fan you would never know it had blades inside so would it matter if it did when you found out? I don't think so, it's still the same fan with no visible blades. Also how else would anyone think these fans move air, Magic? :)

[@megagadgetmad2]

Pask Makes if you look at the fans they use impellers which is basically a bladed fan

[@gonzostwin1]

Just like apple users......they get angry when you point out the obvious

[@davidwilkie9551]

For "giving it a go" it's a total success. I wondered if the gizzards of a small vacuum cleaner, used as a higher than fan pressure, blower, to get around the flow restrictions..? It doesn't need it unless you like to extend the challenge a bit.

[@troyclayton]

I watched for over 5 minutes because of the click bait title, then I stopped. Truth in advertising is best.

[@ralfhedstrom]

@@troyclayton Gosh! You got to widen your perspectives here. It's bladeless where we usually figure there should be blades.

[@russdahms]

That jig for cutting the air intake slots in brilliant.

[@jayanpari]

I was mind blown seeing it

[@ericanderson4973]

I learned something new with this concept. Thank you for the brilliant idea

[@rickb06]

Absolutely, I found a schematic for something quite similar and will be making one for myself SOON! Absolutely fantastic!

[@petercarioscia9189]

I finally got to that part of the video and hit damn you're right, that was ingenious. And now we have that trick in our back pockets. Amazing

[@PrincipalScratcher1]

@Hanaldai Munamana 20:11

[@barthanes1]

Next up on the "Scrapwood Challenge," a cold fusion reactor.

[@terencekreft482]

In place of the fan power supply.

[@beirtipol]

It's scrap, it's crap, it's firewood, but some of the wood contains high levels of deuterium

[@gonzostwin1]

I'd prefer to see him make a Yugo outta wood.....1 to 1 replica of course

[@unoefxz]

no shit eh? how else can you top this? best lathe project these eyes ever spied..

[@asj3419]

You won't manage cold fusion, but you can make a regular fusion reactor surprisingly easily. The first fusion reactors where called fusors and could be made with a high voltage power supply and a vacuum pump. It won't do much other than eat power and spew out neutrons (if you put in _alot_ of power), but atleast the glow it gives off looks nice.

[@669Bazza]

Beyond amazing. So satisfying to watch an expert at his trade. Loved the jigs and problem solving. The final result is beautiful, That's a $600 fan.

[@DoubleNDonn]

probably works better than a Dyson as well.

[@kobegaming5614]

More like 800

[@ShortwickCreations]

You're paying for the name with Dyson

[@niklar55]

I have great admiration for your slot cutting jig, and the ingenuity of using pieces of plywood for successive _equal_ height gauges. Your patience with the segments deserves a medal!

[@Pumalocoooo]

Can we just appreciate that this guy didn't put any ads. Y'all this was made 7 months ago, I don't know what happend

[@syv6173]

he missed out on a lot of ad revenue that would have been a slight inconvenience to us, and a well deserved major pay check to him

[@jeschinstad]

@@syv6173: You could always support his patreon. I much prefer giving a dollar a month for great content than all those ads.

[@Tritium_]

Ooga booga

[@exoticl0197]

Ooga booga

[@floresj]

I pay for KZbin premium so I haven't seen ads in months

[@akaalanb]

This from a 40-year career woodcrafter....this is fabulous work, meticulous attention to detail with a broad skillset I envy. Entertaining too; I'm so impressed.

[@AgentMazgunn]

@@Aykalia dont bother with Angry Pent, the name tells u all. This is awesome work.

[@GauntLife]

@Angry Pent Your parents are 100% failures as are you. Good luck out there, pal.

[@Tauchio]

@@Aykalia Why would he spend 700€ on a fan just to take it apart because someone in a youtube comment section didn't understand that the title says bladeless fan and he proceeds to use blades..

[@Aykalia]

@@Tauchio because idiots only learn doing stupid things

[@austen2751]

@@Tauchio It was a sarcastic way of telling him those fans have blades , genius.

[@CoffeeCupandXul]

Watching this made me so happy for some reason. It's made out of scraps and instead of hiding it, the patchwork-kind pattern is a highlight. The entire process of shaping it was so satisfying to watch. The design itself is quite elegant. The horizontal holes look great and you didn't hide the mistake, instead explained it and decided on a way to fix it. The way you made the holes was brilliant. All in all just such a wholesome video! How on earth did it get almost 6k dislikes is beyond me, luckily the algorithm still picked this up and suggested the video to me ♥

[@TheJunnutin]

The algo doesn't differentiate between up or down votes. "Engadgement" is what matters..

[@wskrrr6874]

I must admit, when I saw the end result, I was blown away by the quality of your work. I wasn't a fan before, but I am now. It really sucks that people got so up in arms about-- alright I'm done with the fan/air puns. Seriously though, excellent work.

[@seanderfuss6865]

the wood wasn't either

[@crustycurmudgeon2182]

@@seanderfuss6865 Two drums and a cymbal.

[@lemagreengreen]

That router jig for cutting slots on round objects, why haven't I ever thought of that? Your videos are full of good ideas, cheers.

[@allgreatfictions]

Need a tool? Make a tool.

[@aserta]

Figure that you're using your router at, roughly 10 20 % of it can do. Some of the jigs i've seen in the chair in industry alone, can blow your mind. One router, and you can make an entire chair, using each specific jig, no sanding, no double fitting, probably 10 13 different bits. Routers are incredibly versatile AND pliable to any task you give them if you think outside the box. Add in variable speed control and you're going places. :))

[@schm4704]

Matthias Wandel levels of ingeniousness :-).

[@raybrown1779]

@@schm4704 Better than Matthias, Pask incorporates style,and art

[@jonwnter688]

Ya, that was genius... but an hour to build? Come on, it took longer than that.

[@RobinManuell]

I love the technical creativity you demonstrate in this project. It made me think about production processes in a whole new way.

[@ELCADAROSA]

OUTSTANDING! Between this and the articulating light you created, I can't wait to get my little workshop back up and running!!

[@JeccaSee]

High school engineering teacher here - wicked excited to show this to my students while they are home and bored. Thanks!!!

[@vap1777]

Jesse F dude I’m in middle school and I’m totally going to engineering in high if this is what you’re doing lmao.

[@chillapollo8188]

Sign me up!!

[@MagklJellyBeanPastelLucidDream]

@@vap1777 well, depends. See if you can choose a class like that. Best of luck dude!

[@bobsagget823]

no such thing as "engineering" in high school you are a loser and your school is probably worst in the state

[@Cenentury0941]

@@bobsagget823 Learn to use punctuations.

[@howiedavis2316]

I have no need what so ever for a wooden blade-less fan . With that being said, I would buy this in a skinny second without question, hesitation or doubt. This is more than just expert craftsmanship , this my friend is art !!

[@mikerotchurts1103]

After watching the video, how much do you think would be a fair price to buy it?

[@CelticSemperTyrannis]

@@mikerotchurts1103 well a Dyson fan is around $300.00. So, I would say a hand crafted one that took two days to build, which I'll guess is about 16 hours of work at $30.00 an hour would be $480.00 + the wee fan we'll say is $20.00. That puts us at $800.00 for a conservative price add another $200.00 to round it up to a solid 1K I think would be a fair estimate.

[@supahx1421]

Ok consoomer

[@chrisopperman8168]

I love it, so satisfying to watch how the project comes together and all challenges are solve. Thanks for the video it was definitely worth watching.

[@LatinDanceVideos]

There is so much detail in this, I’m impressed. Well done. Definitely a showcase piece

[@tharemyhopkins5873]

This is such a great representation of your channel. Problem solving, fun, incredible skill, patience, educational, and fully entertaining. Thank you so much for sharing it with us!

[@PaskMakes]

Thanks very much Tharemy, glad you enjoyed it! :)

[@EldeNova]

@@PaskMakes Not to mention making a practical item, which doesn't look ugly! :P

[@godspi4609]

You deserve more subs my man that was fantastic

[@humungous09]

Hey Tharemy! Are you the cousin of Anthony Hopkins by any chance?

[@tharemyhopkins5873]

@@humungous09 the actor? Nope

[@ericburnett8163]

I said, out loud, sitting alone in my office, "ooooh that's smart" when you showed the guide you made for cutting the slots into the base. Thanks for sharing the video!

[@prorambo5416]

Eric Burnett same

[@alek6362]

Same

[@ronent9441]

Eric Burnett you watching KZbin during work?😺

[@omniomnivor9445]

Same here. I'm sure my coworkers thought I was nuts.

[@briannewton3535]

Yup, me too.

[@HappyQuailsLC]

What a beautiful job!!!! Love the segments of wood being visible.

[@brienduarte1015]

You’re a genius ! Your work is pure art. Thank you for allowing us to join you in your love of woodworking ! Be safe, happy and healthy ! Cheers !

[@AGlimpseInside]

I never gave it any thought when I saw these in the store, but I never really knew how they worked. Thank you so much for your trial and error and showing the world 🌎 👍👍

[@kennmossman8701]

This works by simple redirection. The Dyson works on a different principle.

[@PaskMakes]

@@kennmossman8701 It works exactly like the Dyson does. :)

[@kennmossman8701]

@@PaskMakes www.jameco.com/Jameco/workshop/howitworks/dysonairmultiplier.html

[@ConstantlyDamaged]

@@kennmossman8701 You'll note the cross-section they show on the Dyson fan was the exact same cross-section he used on this. It's the exact same thing as a Dyson, but beautifully made with wood.

[@kennmossman8701]

@@ConstantlyDamaged The air flows through the channel in the pedestal, through a curved path, and comes out from small 16mm slits around the frame of the fan at a 16-degree angle slope. You may think that this just causes air to blow in the shape of the surface area of a cylinder, but because of the physical laws of inducement and entrainment, this allows for the surrounding air to also become drawn in from multiple areas around the fan. In other words, picture your TV weather map; a small low-pressure region is created which actually draws the air in from behind it, like a forming tropical storm. This simultaneous push and pull of air creates a quiet, even, constant flow of cool breeze.

[@lanceparker3342]

I always wondered what Created the wind in a bladeless fan: Apparently it's blades.

[@cheesequack7gaming531]

Illuminati confirmed

[@patrickkrueger3164]

Sometimes they have a tour of the disks actually rotate at a fast enough speed to create wind

[@patrickkrueger3164]

@@cheesequack7gaming531 the Illuminati Freemason Lost symbol

[@TheTazza114]

😂 comment on point mate 👍

[@mowageemowagee5947]

@@patrickkrueger3164 So disc shaped blades then.....

[@RidiculousAddictive]

I've been really enjoying your videos and I especially love how you explain why you chose to do things the way you did (including "it was easier" or "i didn't feel like making a jig") as well as how you point out your mistakes and what you did to fix them. Nobody's perfect and DONE is better than perfect anyway. Your ingenuity and adaptability is inspiring.

[@beverleythomas5708]

Do I care if a "bladeless" fan uses hidden fan blades or impeller blades? No. All I need and want from a fan is the ability to push a lot of air preferably at me. I clicked on this video because I subscribe to the maker's channel and the picture shown was a thing of beauty. After viewing the entire video from beginning to end I am left thinking four things: 1. This build most definitely did not disappoint. 2. The maker truly has the patience and determination required for the completion of such a project, especially with all the fiddly bits involved. 3. The finished product is almost too pretty to be utilitarian. 4. That workshop must smell amazing when the wood is being turned on the lathe.

[@bulletproofblouse]

28 minutes of my life watching this, and it was 28 exceedingly well-spent minutes.

[@jessharriman3254]

I watched this at 2x speed and only spent 14 mins

[@mummyjohn]

Amen

[@oliviatresenberg338]

Agreed!

[@hafeexius]

I didn't realise it was 28 minutes

[@boarbot7829]

Jess Harriman yes, it’s not only me who watches everything on 2 times speed

[@bladesofseven]

I know restoration and creation channels being largely silent has its own appeal, and I can appreciate that. However, there's something about a narrator on the video that acts like a calming guide on what's going on in the video. I dunno, it might just be a me-thing, but I appreciate the commenrary throughout the video.

[@leifhietala8074]

It's about the perfect level of narration: just enough to guide a complete newbie, not so much as to irritate someone familiar with the work. That's a trickier line to walk than most people realize.

[@TheUltimoSniper]

How It's Made.

[@DlOisDOOMSCROLLING]

Its a kinder way to say “here’s whats going on because you don’t think “

[@JoseGutierrez-nr7ro]

Every step had such a unique solution to it, really well done piece i absolutely love the whole look of it and how well it works. Absolutely brilliant

[@noother964]

I can't decide which was better: watching your thought process during work or the end result. I'm impressed by both!

[@jaypruss3236]

Don’t care what negative comments this received, they simply missed the point that you are one heck of a craftsman.

[@ericarmstrong1411]

that is what i was thinking

[@GotCamel]

Holy shit! This dude just made a Dyson fan out of wood. Skill level is at 3000! Great work my friend!

[@tigerzero5216]

I agree. I'm impressed with his wood working skill. (Oh, keep in mind. It was all done with scrap wood, which is the main point of the video. Don't waste the wood.) Also he revealed something about the marketed products claims it is a blade-less fan. That is false. It just looks that way. A traditional fan is in the base and you can't see it. So it looks fan less. I use to think those products did what they did by electrically charging the air alternately to make it flow. Give the air a positive charge and the next chamber would have an opposite charge. The air would move towards it. Now that the air is mostly negatively charged, have a positively charged chamber to attract that air and it an move it along to the next one. It could be done that way. But really. They have a very quiet fan in the base.

[@tigerzero5216]

@Red Pilled Fox "Wizardry" Exactly right. Kind of fits in with fake news/advertizement. Hehe. I bet it could be done though. A device that moves air with literally no moving parts. But it would probably take a lot of energy to do it. Just buy the 20 dollar fan instead of the 120+ dollar fan. They both do the same job.

[@tigerzero5216]

I'm replying to my own comment. I loved the craftsmanship you did. Fantastic work. That wood work was spot on. The best part of it was how it showed those blade-less fans were not truly blade-less.

[@denvergevero9646]

Chinese invented them first.

[@GotCamel]

Denver Gevero What’s your f@&$ing point. GTFOH with that mess.

[@adejones2340]

Great Project, I loved Woodwork when at Secondary School, also did a bit of work with the lathe making a fruit bowl. I really admire your skills and knowledge, not just for this project but overall, it's a lovely sight to see.

[@isleschild]

i was initially disappointed to see that there was, in fact, a bladed fan included to move the air, and then i decided to unwind and appreciate that the aesthetic design was "bladeless". frankly i was interested in what sort of black magic could create airflow without fan blades... but this is nice.

[@freya9107]

I'm in the exact same boat. Was looking to see how he was making air flow and he just pulled out a normal fan. Overall really a cool-looking fan.

[@nicholastart9247]

even dison bladeless fans have blades bro

[@freya9107]

@@nicholastart9247 now that's what I can false advertising XD

[@littlelarvitar667]

never heard of a commercial bladeless fan before? thats what this was designed after

[@CaTastrophy427]

A piston pump could work, it's bladeless, but with a rather inconsistent flow and some added noise.

[@neonindian9232]

“i’ll save salt for my dinner” best thing i heard in a while

[@SR-qg7hw]

Neon Indian me too! I haven’t read many comments past this, but I’m sure there are some criticizing his use of hot glue to mount the stock to the turning base, or maybe not!

[@drew8753]

Videos for kids

[@bruh-jr3qi]

@mrdabbleswithpotion my man what are you talking about

[@RHH1095]

I just burnt down my woodworking shop out of respect and decided to live vicariously through his videos. Great project. Well done!

[@jdc2433]

amen, brother! so funny

[@soup2865]

I love how humble this guy is when he’s a literal mastermind in my eyes

[@kathydoebling2271]

I'm impressed and love the final product. I would love to have something gifted to me. Thank you for demonstrating this project.

[@canyonman19]

it would be so cool to throw a paper airplane through one of those

[@shan0802]

Oh yeah!! Good thinking!

[@bigboldbicycle]

Great idea. My bet is the paper pilot would vomit due to the turbulence. 😋

[@acethefiredragon8525]

Put them in a row and you can make it fly as long as it goes through another ring.

[@jpotter124]

It doesn’t work like you think it would☹️ I have a dyson fan and it just kinda falls to the ground the moment you fly one through it

[@MrModTwelveFoot]

I wonder... If you tied a paper/model plane to a string and fed the string through the fan, would the plane just hover? You'd need a well designed plane most likely.

[@PaskMakes]

This was one of the most fun projects I've made! It involved plenty of problem solving, well before I even started making it. I think it came out fabulous as I honestly didn't know if it would work. Although, I think a more powerful fan would take it further still and maybe I'll pursue that at a later date. Thanks to all my Patreons who've had input in this one, encouraged me and gave me great advice! :)

[@dustysparks]

Try softening your hot glue with isopropylene alcohol to remove it (rubbing alcohol), it should peel right off

[@thatcrazyguy1971]

Nicely done! Question about your woodturning tools: I see you use most exclusively tools with inserts. What are the advantages? What tools do you use there?

[@homer2336]

This is what I look for in woodworking videos. Cool innovative projects that I may or may not build. Nicely done.

[@DennisSuitters]

@@thatcrazyguy1971 They are Carbide Scrapers, they are easier to use than traditional tools, and an easier learning curves, they get the job done though.

[@forestlampcraft472]

👍👍👍👍👍👍👍👍👍👍👍👍👍

[@MHTutorials3D]

Great job mate !

[@TheTferrer]

That was an excellent project and craftsmanship - Thank you for sharing!

[@neosiaxiom4211]

My favorite part is when he made the mistake in lining up the vent thingies but kept a positive mindset and finished the project

[@orangecathobby]

The hallmark of an excellent tradesman isn't getting it right every time, it's knowing how to fix your mistakes and make it right.

[@grayscreations7004]

Neosi Axiom, the old adage, “Learn mistakes (or errors) and you will never make the same mistake again the next time”.

[@emilior934]

Bob ross.

[@robertmurray1833]

This has to be one of the best makes on KZbin. Don't know how you're going to top this, unless you make a working nuclear submarine. What a top bloke.

[@pthanos]

Word!!

[@M3rVsT4H]

Scrapwood submarine.. :D

[@mattyallwood]

Timber cooling rods are problematic

[@jimlee4961]

wooden PC case or wooden xbox case would be cool. Something along those lines

[@ras8916]

Not sure a working nuclear submarine would be enough.

[@MacCekko]

Astonished by your capacities. Really, I am impressed. Thank you for sharing such a beautiful video.

[@BobMuir100]

I love the way you both show us and talk us through your errors it’s very helpful and could be your main attribute?? Well maybe second place as your projects are right on track for me. Thanks Bob England

[@markterrano7659]

That slot jig was just brilliant - what a cool project.

[@noursalman932]

"It worked, which is a bonus" If only I had that mindset in the past years..

[@omegablaze8008]

That line hit me too... What a peaceful mindset

[@maruftim]

Regretful moments

[@D-Vinko]

I relate to his mindset, often even failures can be reused

[@theRealPlaidRabbit]

Isn't that what Oppenheimer said about the bomb?

[@johnhodgetts6617]

I mean, even if it hadn't worked, he could have made a cool-looking flower pot out of it or something. It was a beautiful piece of wood turning.

[@MikeJones-nv3iz]

Thoroughly impressed with your craftsmanship, really good to see your work, thanks for the video

[@codebeat4192]

Wow, looks stunning! Wish I had the equipment you have. I really love the knowledge how to solve problems, the 'simple' tools you made to get the job done. The air holes..... man, very, very clever! I just extend my kitchen with sideboard and case made of scrapwood and laminate flooring left overs. I am very pleased with the results. Also made a cabinet for a 3D printer and CNC machine, all made of chairs, table leaf and other scrapwood. I also reuse metal parts, parts of electronics, such as old TVs. Very satisfying process to see what you can do with it by using imagination. Really fantastic. I think that is the reason YT suggest me to watch this video. It is a keeper, subscribed! In this period of season it is a great time to find scrap wood. It is everywhere! Many people start to clean or change their house and throw away 'old' however useful stuff. Containers full of reusable goodies such as scrap wood.

[@bobafetting6373]

“I’ve a few scraps of camphor laurel that were offcuts from a chopping board. I’ve had a quick go at building a fully functioning city for around 200000 people, and for fun I’ve included a public transport network and clean energy reactor.”

[@Holocaustica]

Lol. The city now has the third largest economy in the world.

[@57thorns]

@@Holocaustica And it is all based on scrap wood.

[@propfella]

Bobafetting, I didn't realise how many 6 year olds infested KZbin. It appears a number of them followed each other here simply to show just how childish they are. Now run away, your Mummy is calling, it's way past your bed time. I'm sure you already know what you can do with your offcuts, this time try it sideways.

[@57thorns]

​@@propfella The number if cranky 90-year olds however is larger.

[@propfella]

@@57thorns OK, so please tell us which person is the amazing age of 90, and why do you associate people of that age as cranky? It appears you're associating with the wrong 90 year olds in your nursing home. If you can, get out a little more and meet more 90 year olds. I assure you I've met many more cranky 40 year olds than those in their 90's. You appear extremely judgemental, or should I shorten that to simply mental?

[@dr.skipkazarian5556]

Your craftsmanship is incomparable, you have an enormous talent at devising jigs and creating innovative design features, and best of all you possess healthy amounts of self-deprecation and abiding patience! From Kauai...best wishes, stay healthy, and give the dog a hug.

[@videobakker1]

I agree totally

[@dyaneblack5648]

Here, here! :)

[@matthewmarting3623]

I’m sure I’ve commented this on your channel before but I’d like to say it again. I really appreciate how much you embrace all the possible ways of doing things rather than just looking at it though a “woodworking only” lens. That was a big barrier when I was growing up and it took me years to learn and develop skills in other areas like metal fabrication and electronics. This is to say that I feel like you’re opening the door for woodworkers to embrace other disciplines and expand their capabilities.

[@jpeplinski664]

Awesome, I learned quite a bit, thank you. Definition - Although it is called a "bladeless" fan, the Dyson Air Multiplier does indeed have blades within; they're just hidden inside the pedestal stand.

[@offairhead]

as a woodworker myself i have to say this is the most beautiful thing ive seen in a very very long time!!! and the jig for the air intake slots was brilliant. the whole project is sooo aesthetically pleasing!!!

[@aodhanpaedermaccionaoith4348]

There's nothing more soothing than watching a craftsman or craftswoman as they create. Years of their dedication, failures and triumphs, money, injuries, etc. condensed into a half hour of satisfaction for the rest of us. Thank you for allowing us to live vicariously through your efforts and for sharing your talent. This is gorgeous. Thank you.

[@highpitwilma]

Aodhan Paeder Mac Cionaoith..what a lovely thruthful and inspiring comment!

[@asvarien]

I'm well impressed by your skills. That jig for cutting the slots in the base is just inspired, I would never have come up with anything like it.

[@cooperrobinson2975]

I KNEW they had fans! Thank you for showing me how this cool technology works! You're a talented man, I would love to get into lathing and woodworking, but I don't have that kind of money! Loved the video, keep it up!

[@KastnerFurniture]

This is a ridiculous idea, ridiculously well thought out and executed. Love that router jig, genius.

[@Justin-tw5ig]

I watch these types of videos and say to myself "I can do that if I stopped watching KZbin and put some effort into a handy craft instead"... Then I click the Up Next button to see how to make a Brick Rocket Stove... ...Rinse and Repeat... Seriously, great work Mr. Man.

[@valentinprose4755]

I can't believe this is all made of wood it's incredible ! Your mastery of this noble material is unbelievable and I really enjoyed your work. Hats off and keep going !!!

[@rezamoini8057]

i really enjoyed every second of this video from problem solving/creating a way to cut wood/slowmotion moments/and how you turned it into a priceless fan.thank you man it was great job.wish you the best

[@randyrodriguez4643]

That jig for the trim router was a genius move. Kudos again, sir!

[@FireyLeo007]

True craftsmanship and ingenuity. Your work is a marriage between the ancient craft of woodwork with the new era technology. KZbin should promote such channels instead of viral meaningless contents in the name of entertainment. You, sir, got yourself a new subscriber. Thank you for sharing your work and please keep it coming.

[@raymondschricker8040]

You have a lot of skill, mate, and i think almost everyone wood agree.

[@crudfingers6403]

This isnt punny

[@raymondschricker8040]

@@crudfingers6403, that is pine with me.

[@xerionis4576]

@@raymondschricker8040 I don't think I'm maple to build anything as cool as him.

[@raymondschricker8040]

@@xerionis4576, hey, that's "oak"y. Don't feel badly.

[@crudfingers6403]

@@raymondschricker8040 its plane to see that you're rasping for trouble. I saw this post and had to re plywood. It's pretty screwed that someone could re router my attention from a woody good video that I'm ofcourse a fan of. But if I'm being totally fair, as much as that pun made me groan, it has to be said that you nailed it. Might need to get hammered to enjoy it next time though ;)

[@isaacbowen7623]

This is amazing. I can't believe how good you are at your craft.

[@jameshorrocks2939]

This was easily the coolest scrap wood challenge to date. It was a breath of fresh air.

[@mihailpetrovici5044]

Hehe

[@triplem9805]

Ha! I see what you did there!

[@animemixking347]

Funny

[@harleyme3163]

ya... fan in a duct... use em all the time in remote control aircraft

[@MrJay_White]

if you do look into using a pc fan, they come in 2 verities, one is for "high airflow" where there is no pressure difference, these are just good at moving air where there is no pressure difference to worry about.. the other is "static pressure" which is good for pushing air through constricted spaces, as they are better for overcoming differences in air pressure. i suspect the latter will be better for your purposes.

[@stormrider8236]

Great video Pask! Thank you for taking the time and effort to put it together. Most inspiring.

[@glenkelley6048]

You are a fine craftsman Sir, as well as an excellent video producer. It is a pleasure to watch you at work.

[@deepoe6636]

I'm not a woodworker, I actually only saw this because it loaded immediately after another video I was watching, but I loved watching this! I always wished I had the tools for woodworking, I am an upholsterer and seamstress, and I found this whole process fascinating - I couldn't stop watching it. Great job! It's a beautiful fan, and the work that goes into it is even more appreciated when you get to see the whole process.

[@scottxfactoraudio8799]

Oh lord,!, Now I feel that I must invent an actual ""Bladeless", (Bladeless), fan. It can be done. Using, "Bournoulli's" forth principle, His "Theorem", that of "variable pressures" will do it. But this fellow here will have to actually make it. Not sure that I have his patience.

[@ranekeisenkralle8265]

Nora i can pretty much relate. I like working with wood (got that from my grandfather) but don't have the tools for anything like this.

[@RockerAtHeart2008]

You, sir, are a master of creativity and problem solving, and you have my everlasting envy and admiration.

[@octaviasaenz6666]

Gorgeous work, and I loved how you kitbashed that fan (I have the same one!) into your design. Showing that even you make mistakes was a nice humanizing detail.

[@lightsnsiren79]

Amazing video! The intake jig was inspired. I especially liked where you used sheets of 1/4” ply to set the distance between slots. Anytime you can eliminate measuring is good. Also, I really like your projects, and I wanted to say that I’ve been watching more of your content because you don’t have sponsor advertisements as part of the video, which makes it more enjoyable. I’ll be sure to say thanks at your store!

[@heather23renae]

I love that you leave in the sounds even when you speed up the film. Gives it a bit of a Wallace and grommet vibe 💕

[@jilldavies7094]

William Morris said: "Have nothing in your house that you do not know to be useful or believe to be beautiful." That wooden bladeless fan meets both criteria. I'm amazed by your skill and problem-solving.

[@illus1ve]

Neat build! A minor change could be a dust filter/mesh in the bottom to reduce the amount of dust spread and dust in the fan (less cleaning and less allergies :P)

[@woodbutcher]

This was awesome. Well done sir, you're incredibly skilled!

[@connertaylor116]

Is it just me, or did anyone else notice the dog's reaction to him testing the fan speed at 25:09?

[@youngjesus5992]

Conner Taylor I saw that😂😂

[@kevinheiman944]

🙋‍♂️

[@justShine78]

Dan! You got eyes mate!

[@AryanKumar-jo1pz]

ya, I did too

[@BluesHand]

Out of over 2.8 million views only 127 of us noticed the the masters' faithful companion.......? Are we just animal lovers or do we see things that others don't? In any case this is a video worth watching! Thanks Pask Makes!

[@alcedob.5850]

This is maybe the most aesthetically pleasing thing I've seen on youtube

[@paulroberts3639]

Have you seen the women’s pole vaulting? Never mind..

[@Whin556]

This is the third or fourth time I've watched this. I enjoy people stepping out of their comfort zone and making beautiful pieces.

[@littlelarvitar667]

mate! this is absolutely amazing! i would absolutely love something like this and it was so well made and satisfying to watch!

[@peterboice348]

Wow! I really seldom comment especially to a conversation as disappointingly inane as elements of this one but i am compelled ... the Dyson bladeless fan is not bladeless. That is not the point. The point is to make a fan that has very little turbulence and no visible blade to create said turbulence and potentially to be dangerous. The bigger point to me is that this guy is a straight up brilliant crafts person. To build this housing that has very small tolerances and very specific complex curved surfaces out of scraps of hardwood is simply spectacular to me. I am a fan ( pun intended) and I just subscribed. Thanks for demonstrating what your exceptional problem solving and years of experience in the shop can accomplish.

[@SickPillow]

it is the point tho. i clicked on this shit because of the clickbait title. i wanted to see a fan with no blades, not some Dyson marketing bullshit. i'm glad you are all excited about woodworking... good for you.

[@Foryogaonly]

Peter Boice technically dyson fan is bladeless. Google dyson bladeless fan breakdown

[@noblewin4312]

The word bladeless fan is just all over this sht. So yes, it is the point. And yes it is click bait👎 you would creat something cool and wanna let people know about, just tell all the truth no need to deceive no one. This guys must know that people will still appreciate the work without lying beforehand

[@robrob3602]

@@SickPillow Just because you are an idiot doesn't mean this was a clickbait.

[@slojinPA]

@@Foryogaonly I just did and there are blades.

[@edmoris1]

Was hovering over the fast forward but 28 minutes later realised I'd felt more calm and satisfied than I have all weekend. Excellent video, beautiful creation and lots of good ideas. Thank you.

[@loganhall6660]

So freaking cool. Love the ingenuity behind the various jigs and carpentry methods.

[@carmenflores2016]

Lots of work but so worth it, it's absolutely amazing and the wood is beautiful. Great job!

[@crustysnake123]

Wireless headphones have wires inside Bladeless fans have blades inside

[@df3yt]

My cashless wallet doesn't have cash inside... still broke ;).

[@purpleprince2598]

df3yt LMBO

[@matthewborg3594]

And this is a commentless comment.

[@rishavbali_]

Wooden fan has fan inside wood.

[@chandumca062]

Haha

[@abjtg8419]

Mate, your skills are out of this world. Your patience is commendable. Keep up the good work!👍🏻

[@IAmMrGreat]

Abjt G did it hurt? Becoming a fan? I don’t think I’d want any of the things he did to the wood done to me, maybe being rubbed in a layer of oil.

[@nightowl2282]

Are you also bladeless?

[@KnightClashR]

hehe a "fan" now...

[@sl9sl9]

And do you operate on 110 or 240 volts?

[@samjryan9348]

It's hard not to be impressed by your woodworking skills. Amazing project :)

[@user-vz5wj9rg3d]

Если купить что-то подобное, вы купите не просто вентилятор, а произведение искусства!!!! МОЛОДЕЦ!!!! If you buy something like that, you buy not just a fan, but a work of art !!!! WELL DONE!!!!

[@montialarson]

I like that there isnt background music. I feel like music takes away from the video. I love woodworking/turning and I love engineering, I also always wondered how those types of fans work. This is an awesome video!!!!!!!!!!!!

[@douggardner9175]

The sound of wood cutting and sanding is music to my ears 👂

[@bogus_not_me]

This is a work of art even if it never moved any air! The fact that it works makes it that much better. I am amazed at your skill to make this from scrap wood. The jigs you made are worthy of a separate video just highlighting those creations! Thank you for sharing!

[@TheLusafin]

that setup for cutting out the slits was legit genius my dude, very very impressed, blew my mind.

[@mumuspain2086]

This is amazing. Woodworking is a beautiful art and you are an excellent practitioner of it. Truly inspiring.

[@THEBibethumper]

But impractical as Heck, though! I would have just used the little Fan as bought, without all the work to hide the blades and Restrict the airflow!

[@alanmuddypaws3865]

An absolute masterclass in turning, jig making and use, routing and so many other different things. Just stunning!

[@marguy1388]

I literally didn’t even notice 28 minutes go by bravo my boy

[@sleepyfella]

Do you play pokemon go ?

[@marguy1388]

CUTE bear yes

[@MrCarnutbill67]

Jesus, I didn’t even pay attention to how long the video was until I read this! That wood species is beautiful.

[@marcusaureliusbermen974]

Now I know :/

[@EnsignLovell]

Wait what......? That was 28 minutes? Honestly felt like 10 😂

[@guerradan1958]

This is the second video that I have watched and have learned quite a bit from your knowledge and experience. I find your videos as a level about the other folks who make some pretty awesome ideas and turn them into a reality. As I said before your projects are levels about the other folks. That’s not to take away anything from them at all. I appreciate all your project that have given me multiple ideas of my own coupled with the jigs that you made with help me to make my ideas come to reality. I hope that you don’t mind me making some of the jigs you have made. Thanks

[@srinivasvaranasi1645]

Great to see a master craftsman and his tools in action!

[@MetalShopMagic]

The creativity, ingenuity, and skill you possess is astounding. I learned many new tricks for the tools I use everyday. You made something that I do not believe anyone has ever tried to do with wood. The amount of experience you have in carpentry shows. This is an amazing project made by an amazing creator. I cannot believe I got to watch this for free. Looking forward to binging your channel now that I have found it.

[@Michael_Dangelo]

Your jig idea for the slits was genius. As was most of the project. Beautiful craftsmanship

[@Dronesey]

That jig to cut the slits is fabulous! Awesome work and great project!

[@paulinammarie]

This looks so impressively complicated and intricate, it hurts my brain a little, but Bravo. This is amazing craftsmanship

[@SurBean]

Paulina Klevgaard 69

[@msr_77]

Not DoomSlayer ah , I see you’re a man of culture aswell

[@archer3762]

@@SurBean Poubelle! J'espère que vous pourrez passer plus de temps à nettoyer votre bouche puante ... vraiment puante!

[@SurBean]

Archer no hablar espanol