DIY: Build Your Own PVC Snake Enclosure. Part 1

[@robertcollier1128]

By far one of the best tutorials I've seen on here

[@sghpest]

Appreciate it dude. Wish KZbin wouldn't have deleted the audio on Part 2. Thanks for watching/subscribing. 😁

[@robertcollier1128]

@@sghpest yeah I tried watching part 2 but couldn't watch it the audio was driving me nuts

[@robertcollier1128]

@@sghpest I'd like to watch it if you could anyway send it to me by chance??

[@snakesonaframe2668]

Entertaining and very easy to follow for someone like me who hasn't built anything more complex than a bare bones fish tank stand.

[@sghpest]

Anything that I do HAS to be easy. 😁 Thanks for the kind words.

[@snakesonaframe2668]

@@sghpest lol you're welcome 😊

[@rc2466rc]

Such an awesome channel

[@sghpest]

Appreciate it. 😁

[@jjs811]

thanks for showing people how they can do this themselves. the prices on these are ridiculous and the wait times are even more ridiculous. thanks again for sharing!

[@eviehankins8223]

Thanks :) idk why but it helps when I have a visual of anproject. This is exactly the video I have been looking for!

[@heavyset0223]

Wish I could get pvc over here in the southwest. Seems to be an east coast only product. Had to build my cages out of maple plywood.

[@coreyw7131]

Where did you buy the sheets

[@k.p.5438]

Wait.. where is the part 2?

[@chuckflieger6234]

love watching your videos man. keep up the good work

[@sghpest]

I Appreciate that! Thank You. 😁

[@chuckflieger6234]

At the end of this video the music starts playing. I watched your video from today. About the music copyright. So dumb

[@Ibaneddie76]

Cool video for sure but the big deal for me is actually seeing a glimmer of hope as to where to find the mythical PVC board, I'm not lying I've searched high and low all over the internet, gone into reptile shops and talked to breeders and nobody wants to tell me where to get PVC board. What is it with this stuff, why are people so secretive with it, it's just PVC. Hopefully I can get some from the website on the board you are using, the only companies I've found online won't even answer my emails and there is no buy it now button, very ridiculous. Thank you for posting this I really appreciate it.

[@sghpest]

Lol, mythical is a great way of putting it. But yes, it is hard to find.

[@cfk4981]

I got mine from Home Depot and they even cut it to the dimensions I needed in the store!

[@christopherbelles6947]

Should add resources for pvc sheet purchase. I can't seem to find it.

[@kidvicious2227]

Having the same problem

[@kidvicious2227]

In some states. Certain kinds of materials and equipment are only sold at special store and you have to be licensed to buy

[@kaiweitze5899]

Can't find part two!

[@philipmead5113]

Excellent and interesting video.

[@gregholden8812]

I really enjoy your videos! What would be the final $$ in building a 72x23x18 pvc enclosure including the glass doors?

[@sghpest]

Depending on your PVC purchase price, but let's say average $. 2 sheets PVC- $85/ea = $170 Tempered Glass- 2 panels= $70 (Lexan Polycarbonate would be less, $55) Drop down Door Hinges: $20 Glass Channel: $25 So, as you can see, many options but anywhere from $245 and up depending on your local pricing and availability.

[@gregholden8812]

@@sghpest thanks so much for your help! It's getting tough money wise in ordering 6ft enclosures from ap!

[@Big_Ginger_edc]

Nice video Steve. Awesome tips in this video. Definitely saving this for later use 👍🏻

[@scottmartin606]

Thank you Steve. Awesome Video bro.

[@cfk4981]

can you mention the dimensions of the two polycarbonate windows? I Am having everything precut at Home Depot to make my first DIY enclosure a bit easier

[@MaritaDeLaPenaDTG]

Nice video, where do you buy your PVC panels and is there a minimum thickness to use?

[@sghpest]

Bought my panels from a distributor in Pelham Al. I use 1/2 high density PVC. Anything thinner would be too flimsy.

[@MaritaDeLaPenaDTG]

Thank you.

[@sghpest]

@@MaritaDeLaPenaDTG Anytime. 😁

[@mattjohnston8705]

Is there a part 2?

[@sghpest]

There is a part 2, but KZbin deleted the audio unfortunately. Will be working on a newer version shortly.

[@johnwray537]

The problem with this is the fact that you don’t say where to get the PVC board at???? Or exactly what it is called??

[@tonyjohns2204]

Hi may I ask you a question can you put a flex watt heat tape in the bottom of the PVC enclosure by cutting a square hole for the by placing a tile on top of the flex watt to hold it in thank you so much for your time

[@sghpest]

I have seen people use that method but they used tempered glass instead of tile. You would have to seal either one to prevent urine or spilled water from causing mold under enclosure Personally, I'm not a big fan of heat tape. Seems you could avoid all the hassle by using a heat panel instead, it's a little more costly but comes with lifetime warranty. Not to mention a better heat gradient.

[@tonyjohns2204]

@@sghpest what kind of heat panel are you referring to. may i ask

[@bjsreef6620]

I watched part 1&2 on this build series. I have a question for you. If you we’re going to make the doors sliding doors what are the measurements for the door glass for size cage you are building? Also is there a top and bottom track to hold the glass in. How’s about a video covered that part of building the cage. The first to videos were spot on so why not.😁

[@adamjustice5755]

Does the PVC boards have a specific name? I'm trying to estimate a price for a build and everything I'm finding online at Lowe's is PVC foamboard which I know is not right.

[@LoveJessicaRie]

Veranda HP PVC trim is what I've found at home Depot. Around $70 for 8' x 4'

[@toiletbowlshow]

That works just put wood grain on outside an smooth side on the inside if your build but thats not what hes using in this video he is using (palight half inch high density foam PVC sheet) runs at about 88 bucks a sheet of 4 x 8

[@kristinsilva7244]

Where do you get your tracks and what brand type

[@Jackpot_Jonny]

The website is on the PVC at beginning of video I’m ordering 3 sheets

[@toiletbowlshow]

Were i neec to know so bad whats the namr an type of pvc to use

[@rdromin]

Try a jigsaw for the front panels

[@scotthudgins2003]

How much was the pvc sheets

[@sghpest]

Buying 1=$93. Buy 10=$82/sheet. Buy 20+=$72/sheet.

[@patrickcullen8875]

awesome thank you

[@michaelross5674]

Nice

[@louiesais8756]

Thanks need to build 2 of these

[@derrickryantrujillo]

After your eggs hatch, can you make a video showing us how to make a rack system?

[@sghpest]

Unfortunately, my Hatchling racks come from Vision. Have never built something like that but have seen many videos on how to do it. Just looks like a pain in the ass. Lol

[@treenagarner5018]

Hi there! Thank you so much for this video!! I love this design :) I’ve been having a little trouble finding out what kind of PVC to use :) is it ok if it is the “PVC FOAM BOARD” stuff?

[@sghpest]

Hey Treena, I've actually looked into that and feel that it wouldnt be durable enough. You want to find "high density" board. Especially if you are stacking. It took me quite a while to find it so don't give up. 😁

[@treenagarner5018]

MostlySnakes hey thank you so much! I will be stacking but I will actually be making smaller cages for the most part, the biggest snakes I have are a Colombian Boa and a Blood Python, the majority of what I have is Ball Pythons lol! I just wondered about the PVC foam board because it looks like they make cabinets and drawers and stuff out of it. 🤷🏼‍♀️ I really appreciate your feedback!! I will keep looking!! ;)

[@sghpest]

@@treenagarner5018 is the board a 1/2" thick? If you are doing smaller enclosures, it may work. I'm used to retic questions so sorry I didn't take that into account. Good luck and let me know if you have any more questions. 😁

[@treenagarner5018]

MostlySnakes will do! Yes 1/2 inch :)

[@varanusx5712]

Palram.com is the site he uses so many guys who build these enclosures want to be so secretive about the source they have. It’s printed on the protective sheet in the beginning of the video you can see it.

[@andreperson3504]

Great video but please stop leaning over the saw blade once you finish the cut. Shut if off first because if you slip that blade will rip you open.

[@sghpest]

Great advice, Andre. As I walk through the Valley of the Shadow of Death.... No... wait... that may be inappropriate. 😉

[@JoeSmith-mp5xh]

Saving this for later use. 📽 🎬

[@jnwreptiles3667]

Lol Dumb ass. Great video, May have to try some PVC Enclosures now .

[@teamliquify6614]

I don’t have a table saw or skill saw