DIY. Building New 3300mAh Li-ion Battery USB-C For Old BOSCH PSR 1440 Drill/Driver 2005

  Рет қаралды 42,749

ARM Tech Homemade

ARM Tech Homemade

Күн бұрын

Пікірлер: 20
@robert79513
@robert79513 4 жыл бұрын
Great video. Could you make a video about this spot welder you are using?
@kevinalejandrocruzmedrano
@kevinalejandrocruzmedrano 2 жыл бұрын
Great video. Happy New Year. Greetings from Mexico.
@MultiSteelking
@MultiSteelking 2 жыл бұрын
Are you going to make a video how to make the spot welder you are using? Please :)
@drtnazaryan
@drtnazaryan 3 жыл бұрын
շատ ապրես 👍
@fredericdeniaud3268
@fredericdeniaud3268 3 жыл бұрын
Very nice video, but... i don't know which type/model/reference of blue LED you used...as a charging indicator) Why has it got 3 pins ? and how is it soldered/connected to the USB-C connector and to the charger circuit ? Thanks for the information
@RusWo
@RusWo 3 жыл бұрын
Hi, which AWG do you use for spot welding and which one is on the accumulator (MOSEWORTH)?
@70_T_N_70
@70_T_N_70 3 жыл бұрын
Is that mini battery cell welding machine ok to use?
@Shadow_-be9nk
@Shadow_-be9nk 3 жыл бұрын
mein akku 3s40A bms und sony vtc c4 (30A) aber nicht funktionert? Warum?
@HunerliVM
@HunerliVM 3 жыл бұрын
Batterien alte ?
@tylerbabinec8473
@tylerbabinec8473 3 жыл бұрын
Hi! I have a question about your battery packs, I don't see any ways I can reach out for help but I figured I'd try here. I'm not sure what is wrong with mine but I'm quite sure I've done everything correctly.
@MicSokol
@MicSokol 2 жыл бұрын
BMC board may not be good or batteries are not strong enough, some boards may require to double the batteries, 3s=6 batteries, 4s=8 batteries. If BMC not good don't leave batteries attached to it as it will ruin all of them. It happened to me.
@buttgbuttbuttgbtt854
@buttgbuttbuttgbtt854 4 жыл бұрын
Bhai ya sb kha se Mily ga
@fay296k
@fay296k 4 жыл бұрын
you have to use power cell with high discharge rate like 10 or 20 c this cel is like 1 or 2 it will be dead soon
@ARMTechHomemade
@ARMTechHomemade 4 жыл бұрын
Don't worry this celles have 30A discharge rate, you have fake info about this celles.
@krcy0
@krcy0 4 жыл бұрын
Where are u from
@hasanalitonyali
@hasanalitonyali 3 ай бұрын
The subject explained in the video footage from 7.45 to 9.20 minutes is very unsuccessful. You install LEDs, there is no explanation beforehand. In short, that part is a disappointment.😡😡
Cordless Screw Driver BOSCH IXO Restoration and USB TYPE-C Convert
15:08
Repair&Restoration
Рет қаралды 228 М.
coco在求救? #小丑 #天使 #shorts
00:29
好人小丑
Рет қаралды 114 МЛН
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 25 МЛН
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 2,4 МЛН
Upgrading The Parkside X20V Team 2Ah Battery Pack to 9.9Ah Using 3D Printer
12:06
Bosch Cordless Drill Ni Cd to Li Ion Battery Conversion
11:40
CHEAP DIY Spot Welder | Compared to $200 Sequre SQ-SW1
15:09
Donny Terek
Рет қаралды 1,6 МЛН
Fix Cordless Drill  - Parkside PSBSA 20 Li B2
30:59
Dahen Zana
Рет қаралды 3,7 МЛН
Make a Mini Spot Welding Machine for Lithium Batteries a $0 - DIY
13:54
Gianni Pirola Fai Da Te
Рет қаралды 2,7 МЛН
How to convert an old Ni-Cad battery drill to Lithium Ion!
27:22
TheFlyingKiwi
Рет қаралды 18 М.
coco在求救? #小丑 #天使 #shorts
00:29
好人小丑
Рет қаралды 114 МЛН