i build a little manifold from the tanks main pump
@cheaperreefer30307 жыл бұрын
Can you expound on that a bit. I am building one and would love to not add another pump.
@AdamUS123-j7q2 жыл бұрын
I think that it looks cool enough to sit by a tank! People would be amazed!
@PaulieWalnutss7 жыл бұрын
It works tried and tested bro I've been doing it on my nuvo 40 and Reefing with O has been doing it on his nano with 100 % success with the Triton method Travis
@FishOfHex7 жыл бұрын
Yea i knew it was going to work all along its just fun watching people go nuts over it
@PaulieWalnutss7 жыл бұрын
PMSL By the way how do you like the ufo led ? Do you have the A100 wifi box to fine tune it ? Thinking of getting one ....
@ScottM7 жыл бұрын
The reactor looks really great buddy. Looking forward to see how it works
@mogtrader84 жыл бұрын
Do these LEDS las long? Where did you get it. Thanks.
@soloreef72667 жыл бұрын
I like this chaeto reactor setup...definitely curious to see how well it works out.
@FishOfHex7 жыл бұрын
after only a week the reactor is almost full of chaeto and with the cycled rock i have yet to even see a diatom bloom
@Jel0XD5 жыл бұрын
Question, if I don't have a sump and put the reactor at the bottom in the cabinet, will the water go up due to pressure of water coming in up to the main tank?
@FishOfHex5 жыл бұрын
No you need a pump
@jjmccloud3 жыл бұрын
Which reactor is that
@bryant0267 жыл бұрын
I have great success using the red and blue LED on my reactor..
@robertlugo87027 жыл бұрын
I'm curious how warm are those lights to touch? I know a lot of people had complaints with various Amazon lights causing hazing and micro-cracks on their reactors. I'm not sure if it's because of overheating on the lights or of a particular material that the reactor is built from. So that dimmer might just come in handy. Also just to point out to others watching these lights are rated ip65 which is not completely waterproof. The ip68 lights are 100% waterproof but hard to find and very very expensive compared to these.
@FishOfHex7 жыл бұрын
they are just a little warm but nothing that would cause any issues with the reactor. I left them on for 24 hours just to see with no issues.
@bootysismeat017 жыл бұрын
Love the videos! ive builT one of these aswell, pretty much the same thing, but 2 of my plastic screws that you synch that top acrylic plate down with broke, question: what are those lil plastic screws called, know anywhere to order, because i cant find at hardware stores
@FishOfHex7 жыл бұрын
hmm i would google the reactor brand/type and screws. i have found them before.
@CoralEuphoria7 жыл бұрын
Try searching "nylon thumb screw with knurled head and shoulder". You can figure out the size by going to a hardware store, then ordering the correct screw online. HTH
@cubanreefer15827 жыл бұрын
You don’t need to cover that reactor so the light is only inside the reactor?
@davismcmoney53427 жыл бұрын
Keep an eye on it the heat from the leds cracked the acrylic on my reactor
@jasonkorando7 жыл бұрын
What return pump are you using?
@lucasbaluyut57464 жыл бұрын
what if i wrapped it in like foil
@caewalker92767 жыл бұрын
My husband has OCD , it's more frustrating watching it. Thanks for another great build vid.
@FishOfHex7 жыл бұрын
yea i put my first attempt on video and redid it like 5 times haha
@caewalker92767 жыл бұрын
That's ok. As long as you're happy. If not seek therapy! 😕
@bluefathoms32365 жыл бұрын
Travis how ling is your photo period on this reactor? Please
@FishOfHex5 жыл бұрын
18 on
@An0n_Ym0us_796 жыл бұрын
What pump and which reactor did you use?
@FishOfHex6 жыл бұрын
I forgot i talked about it during the tank build video, I know its 1200gph
@JohnJohn-hv4ef7 жыл бұрын
The thing I would be more interested in learning in future updates is wether this reactor helps keep your ph up during the night.
@SantaMonicaFiltration7 жыл бұрын
Red, or red+blue, will grow even better, and so you can use less lights which will make less acrylic-cracking heat.
@donovan26817 жыл бұрын
I set up an algae reactor similar to these about two months ago to finally sort out my hair algae and excess nutrient levels. Finally got down to undetectable nitrate and phosphate levels on my test kits. did those tests last night and was so surprised. With the chaeto still growing in the reactor and nutrient levels undetectable, should the hair algae on my rocks finally start dying? think I should scrub it all off again? (tried that when nitrates where at 2ppm and p04 at 0.03, but it slowly grew back). Love the vids!
@richiebag60727 жыл бұрын
What is your light schedule on the cheto. Every time I get cheto it turns white and dies after about a month. And gets a slime like coating. I was thinking of also trying other macro algae’s. By Lfs has some but it’s covered in bubble algae so I’m all set with that. Will you be selling any grape calerpa soon?
@FishOfHex7 жыл бұрын
12 hours on while main lights are off
@fishysnowman90827 жыл бұрын
Really nice looking 👍👍
@thepassionreef6 жыл бұрын
Great video FOH i used the topled grow light and have been very impressed with the growth just after a week (just released a video on the update on my channel)....one suggestion would be to put the outlet which connects power adaptor on top of the reactor instead of bottom...tht just helpful in avoiding any water spilling over it when it comes down to maintenance or removing the chaeto...love your vids as always..
@MCDonut4157 жыл бұрын
@4:49 5.56 or .308
@FishOfHex7 жыл бұрын
7.62
@metalz0027 жыл бұрын
The issue I have found with this , is the algae only grows up , it does not want to stay at the bottom. If it does go to the top it does off
@Davelembo7 жыл бұрын
Nice build. It must take you hours to put lights on the Christmas tree with your OCD. J/K
@FishOfHex7 жыл бұрын
Yea i dont even bother anymore
@ghost2k255 жыл бұрын
Be careful when you do this, I did this exact setup and eventually had a major crack on the reactor due to the constant heats of the lights. Water leaked and also got in the wrong place
@jryanwill5 жыл бұрын
Dont wrap them so much, you dont need to cover the thing in lights for it to work.
@jjmccloud3 жыл бұрын
Leave 1-2" between wraps
@jaymealcay19777 жыл бұрын
What pump did you use
@bajan_hove90787 жыл бұрын
I also did it i have 2 reactors I didn't like the warm white the red and blue grow my cheato like crazy and I've been running zero on all lvls haven't had nit pos in months!!! Plus I have so much pods its not funny the triton is just another added cost all u have to do is keep your iron up for the cheato to grow gl!!!👍👍
@SoulJimyDark7 жыл бұрын
If you need more % of refugium you can just do two of those
@llamedosr78437 жыл бұрын
I had those lights. My sky TV remote made them work. Annoying