DIY Conductive Paint (By three methods)

[@ShivrajKarkera91]

Ahhh the classic Green Day riff ❤

[@sofuzzywuzzy]

When will you be doing the electroforming video using method B? I've tried PVA, alcohol, and water-based acrylic but they're all trash. That solvent acrylic looks very promising.

[@pashoriwe]

so when

[@philipcochenour5223]

Don't understand which one is best for shielding a b or c please let me know

[@frodowiz]

i would try lightly abrading the 3rd methos. i can imagine the paint coating much more graphite surface area thus making more resistance

[@wizardin9365]

Sorry for the ignorance. Does less Ohm equal to more conductivity?

[@DIYbama]

Yes, smaller the Ohm, more the conductivity. Sorry for not explaining in the video

[@oliverschalles6020]

yes.

[@wreckingball8881]

Why did you not use B then?

[@tonybeatbutcher]

I'm wondering if it works like a velostat to make presure sensetive fsr's

[@wilmernecharles1217]

What setting did you put the multimeter on to test the conductivity?

[@erenaksoy457]

Which method provides more efficient conductivity?

[@dollarbutt]

Not watch the video?

[@zachryvernon]

the lower the reading in ohm's on the multimeter the more conductive it is

[@Blue.star1]

Can we make using combination of chemicals, combining wet alkaline compound from 1.5v cell and lithium from lithium cell , add epoxy or acrylic or any other glue, I think conductivity improves.

[@guachingman]

drop the horrible music please, thanks for the vid but damn

[@suicidebylifestyle9267]

There's a button for that...

[@Rhino-Flea]

commenting so we can jam to it together

[@thorstendornbach3976]

the Articel 3. Mr. Color model paint is empty, can you give me an alternative? I need something that I can buy in Germany

[@thorstendornbach3976]

or Can you tell me whats in it?

[@DIYbama]

I tried mr. Color, actene, thinner, sodium acetate and mr. Color is the best

[@DIYbama]

May be you can try other modelling paint

[@thorstendornbach3976]

@@DIYbama thanks a lot, can you tell me what the Ingrediens of the mr. Color is? I cant finde this exactly "46" paint on the Internet

[@DIYbama]

Sorry, i am not sure

[@TheSpinninHead]

Helpful video👍 Can you please tell about Mr. Colour model paint? Is it water based or oil based? I want to use this method for electroplating pla prints.

[@brettfafata3017]

I'm here for the same reason. I can't find premade conductive spray paint!

[@edelaguila4]

The weir thing is, that Mr colour model paint, is also Acrylic paint. So I guess is a matter of quality.

[@melneldell2187]

can i use method C to repair keyboard

[@caecita5910]

can we electroplating silver over graphite? or its necessary to copper it first?

[@dollarbutt]

Anything conductive is fine. Nickel, silver, copper plating etc. will work fine with graphite. More conductive paint just might work better/quicker.

[@georgeh1352]

I would have thought conductive paste might be useful, the paste used on heat sink to component. just need a drying agent to be added.

[@aaaaii6511]

Thank you

[@irishguy200007]

What's the model paint used for?

[@marmaladepie2722]

PLEASE MAKE A VIDEO ON DIY EMF CONDUCTIVE SHIELDING HOUSEPAINT, WITH THE RIGHT FORMULA, ON WALLS & CEILING BECAUSE PAINT IS SO EXPENSIVE. THANK YOU. WATCHING IN CANADA

[@blatantmisconception]

Therapy and medication works...

[@gencenointeli6496]

It would appear that quite a few people commenting on this channel are missing the key word that best describes what is being presented. That word is "Conductive" Anything that is conductive allows something to travel along it, or through it, without much resistance. In this case we are talking about electricity. The more conductive a material is, the lower is its resistance to electricity travelling along or through it. When the subject is EMF, which is a form of radiation, is being explored, conductivity is bad, resistance is good. This is because most times, EMF is something you don't want reaching you. So in this case the greater is the resistance of a material, the harder it is for radiation to travel along or through the material and reach you.

[@lawabidingcitizen5153]

What for? 5G!? You really don't need to worry about wireless antennas...

[@reizinhodojogo3956]

water

[@Gasp7000]

​@lawabidingcitizen5153 Electronic surges. More common than you think. Protection protects your 5G phone from getting fried, among other equipment.

[@elmultimediaschoolofartscu3924]

Please power lights or something, sho❤😢 2:18 😢❤😢❤

[@camimaxventas5039]

Can this be used for electroplating plastic objects?

[@DIYbama]

Yes, of course

[@TheStigma]

Yea, but you need to follow the general rules of painting plastics. Some plastics have very low surface energy (similar to teflon) and paint has troble sticking. General rule of thumb is that if the plastic is heavier than water (sinks) it can be painted without too much problem. Floating plastics like the common HDPE and PP need flame treatment - otherwise you can expect bad finish and delamination. In all cases a light sanding is recommended for good adhesion.

[@johnhopkins6260]

Theoretical Current rating? Increased by simply adding MOSFETs?

[@shivakeerthnishanth6669]

Can i use it for electroplating

[@DIYbama]

Yes, you can

[@Nyktors]

I don’t understand which better for shielding my guitar…

[@kewintaylor7056]

Goid idea!

[@gadisjawa8535]

Is this safe?

[@abdulbilakhiya6026]

Very nice excellent

[@woodwork2410]

thanks

[@bobyk87]

ain't model paint nitrocellulose?

[@amusri1]

Does it actually work

[@DIYbama]

Of course it works

[@fatturtle-h7s]

no

[@jhonnyambarita236]

thx

[@FIXDIY]

Good

[@ytrew9717]

anyone tried simply nail polish (or epoxy) + graphite?

[@markwilliams5654]

Of you put graphite in expoxy or super glue it will get hot

[@ytrew9717]

@@markwilliams5654 I did not know, did you try? For what reason?

[@FixItYerself]

lol. it's the same

[@basileias2002]

!!~~~~

[@ali.c1]

this music :(

[@Rhino-Flea]

boppin

[@fatturtle-h7s]

now be a good boy and tell everyone the truth, when it dried it lost its conductivity so all you lot failing isnt you just buy it :) most paints and binders expand when dry you need one that shrink so i say easier to buy isnt it, time you spend buying paints/graphite/carbon even making nanoparticles using chemistry you still end up with 0

[@jokycrack]

Crack

[@dreletronica]

Bad música ! Oh please , Take It out

[@AORD72]

Got to vote this for the worst music on KZbin.

[@miguelbaltazar7606]

c is the best because it conducts the most electricity why worse lol lmao xd

[@gencenointeli6496]

Wrong! ohm measurment represents resistance. The higher the resistance the poorer it is for use as a conductor. However high resistance conductors are great at producing heat. The filament in your bread toaster is a good example of a material with high resistance value.