I understood 2 words. Crankshaft and Success. Excellent visual demonstration sir!
@DIYPhil3 жыл бұрын
Thank you. It does have English subtitles if you turn on captions. However, the visual demonstration is self explanatory even without the help of spoken language.
@jeffreysharkey8448 Жыл бұрын
I have split hundreds if not thousands of motorcycle engines, but always had the tools because I worked at a Yamaha/Honda shop. I have never seen reverse engineering as ingenious as your demonstration ! Great ingenuity ! I too understood nothing said verbally, but understood the demonstration perfectly - Great Workmanship !
@DIYPhil Жыл бұрын
Thanks. I mentioned in the video that I will be splitting the case only once in a blue moon so I did not buy a crank splitter tool. Here in Southeast Asia, the road side motorcycle shops will use the big screw driver and hammer to split the cases. My method is somewhat better than that.
@jeffreysharkey8448 Жыл бұрын
@@DIYPhil It sure is. Because I have been away from the motorcycle shops for over 35 years I was looking for a "clever" way to do it without the tools. Your video helped a LOT ! I have figured out Now how to split my cases with odds and ends in my garage. If I am smart enough to video it as you did, I'll share for sure. Thanks again !.
@jeffreysharkey8448 Жыл бұрын
Done ! Some brackets from who knows what, some drilling and a universal splitting tool - BAM! It popped open. Thanks again for the ingenuity of thinking outside the BOX ! I have pictures, but no video's and have no idea how to post them here? Thanks again !
@donovanlucibello3793 жыл бұрын
The universal language of motorcycles, "BRRAAAPPPP!" Nice work, Phil!
@ZPDSurvival Жыл бұрын
I need to Buy a Step Drill Bit. Excellent Video.
@ZPDSurvival Жыл бұрын
I was taught when building the old VW Motors that the piston rod should not be banging against the bore. Great Video. Thank You for Sharing. I subscribed. +1
@DIYPhil Жыл бұрын
thank you for subscribing
@themicdfiles18652 жыл бұрын
I bought a $10 piece of flat stock at tractor supply last night with the same intentions and just saw this video. At least I know I’m not off my rocker or out $70 on a case splitter.
@DIYPhil2 жыл бұрын
In my case, I just tossed the piece of angle bar back to the scrap bin after it did it's job.
@SpeedStar763 жыл бұрын
Well, that just saved me £60. Thanks mate, nice work 👍
@DIYPhil3 жыл бұрын
Good to hear.
@BrattyBiker3 жыл бұрын
Thanks a lot sir, thanks a ton for the english subtitles as well
@DIYPhil3 жыл бұрын
Always welcome
@SiR2Dean3 жыл бұрын
Thankyou for reminding me about the subtitles....🤦♂️😂 Great video! Thanks for subtitles
@namtech425 Жыл бұрын
This is super crazy and so easy, well done! I am going to make one now.
@DIYPhil Жыл бұрын
wish you luck!
@MxStRider7 ай бұрын
Horray!! My people has done it again. Working with what scrap available. Salamat Parry.
@DIYPhil7 ай бұрын
No problem. This method is a lot better than splitting the cases using chisel and big hammer as done by street side shops.
@ryanhenry21Ай бұрын
Great idea 🤙
@DIYPhilАй бұрын
@@ryanhenry21 thanks
@MrSurfbum12 жыл бұрын
Thanks brother!! Awesome video!
@DIYPhil2 жыл бұрын
You bet! hope it helps
@mupcountry71533 жыл бұрын
Thanks bro very helpful!
@DIYPhil3 жыл бұрын
Glad it helped
@kevinmarasigan52672 жыл бұрын
nice paps budget friendly
@DIYPhil2 жыл бұрын
ou. ang dali lang gawin diba. mas okay na yan kaysa puro pukpok ng martilyo para mabiyak yung crankcase
@eschrader2 жыл бұрын
This looks like a lot of time but I appreciate the explanation. Just got one from Amazon for $50 and it comes tomorrow
@WestHaddnin2 жыл бұрын
Did it work out for you?
@link2g715Ай бұрын
my dad bought a kx85 for the frame about a year ago, me and him built the first bike but then i saw the blown engine laying around, asked him if i could rebuild it and put it in a buggy he was all for the idea, this is the exact type of stuff i need cause its a waste to buy tools when im only going to be doing this once. edit: i did this with 5mm steel, the steel bent before the case even started to split, idek what im going to do now maybe just spend the dumb money and get the tool
@DIYPhilАй бұрын
Exactly the situation I was in when I rebuilt this old motor. If I buy the fancy crankcase splitter tool, the cost of the tool alone may be more than the value of the old motor.
@orrinsheppard12255 ай бұрын
Well done 👏 Thanks
@DIYPhil4 ай бұрын
Thank you too!
@sweetnothingsirobot30322 жыл бұрын
Gotta pilot hole for those step bits
@andresvelasquez71454 жыл бұрын
Buen trabajo amigo
@DIYPhil4 жыл бұрын
Gracias amigo
@KINGUKITCHEN4 жыл бұрын
Hai nice video. Why you told that don't use powertools???
@DIYPhil4 жыл бұрын
Hi KINGU KITCHEN. What I want to show is the video is that we can use my method if in case you do not have the special tool such as the crank case puller.
@eduardodaquiljr9637 Жыл бұрын
Itanong ko lang sir kung may threaded hole din sa mga cg china engines para sa screw jack?
@DIYPhil Жыл бұрын
Yung mga CG china Hindi p ko nkapag bukas pero lahat Ng Yamaha at Honda n motor na nabiyak ko Meron Kya mlamang Meron din yan.
@aeiouwu1553 жыл бұрын
ano po mas easy i-split 2t o 4t engine? o same lang po ba Sir?
@DIYPhil3 жыл бұрын
yung 2T engine mas mahirap ng konti. kasi diba sa 2T selyado yung crank case sa may segunyal, kaya may gasket sealant din dun. saka kadalasan forced fit yung isang bearing sa crank case.
@aeiouwu1553 жыл бұрын
@@DIYPhil tnx sa pag reply, Sir. really appreciate it.
@jimueldecastro1267 Жыл бұрын
Di nmn po ba ma lose thread ung segunyal?
@DIYPhil Жыл бұрын
Hindi po basta yung butas sa angel bar mas malati dun sa roskas ng segunyal
@manueldizon98164 жыл бұрын
Boss prehas ba yung block stud size.. ng 125 at 175.....
@DIYPhil4 жыл бұрын
Pareho lang. Kapag nagka oras ako videohan ko rin yung conversion ng 125 to 175
@manueldizon98164 жыл бұрын
@@DIYPhil ok boss thankz... more power sayo.... Keep up d gud work... Motorcross rider from pampanga 👍👍👍👍👍👍👍👍
@manueldizon98164 жыл бұрын
Convert ko sna 125 ko sa 175 block.... Pero de kaya sila fit ba boss
@DIYPhil4 жыл бұрын
fit po yung block.
@hahahahaha9904 жыл бұрын
Pre ang size ng side bearing ng 1995 na 175 same lang ba ng 01w na 125?
@DIYPhil4 жыл бұрын
same lang po
@hahahahaha9904 жыл бұрын
Ang laki ng ckrangshaf nya ng 175 mo same lang 125?
@DIYPhil4 жыл бұрын
same lang po ng 125
@hahahahaha9904 жыл бұрын
6 ang stud bolt ng 175 ang 125 4 lang
@DIYPhil4 жыл бұрын
tama. yung stud bolt sa cylinder head. pero sa base pareho lang na 4 stud bolt ang DT125 at DT175
@johnjohnvillar87744 жыл бұрын
sir kano lahat nagastos MO
@DIYPhil3 жыл бұрын
mahirap po masabi yung saktong nagastos dahil sa dami nirepair sa makina pa lang. sa ngayon nasa 10,000 na mahigit