How to Split Motorcycle Engine Cases

  Рет қаралды 25,569

Cyclepedia Press LLC - Motorcycle Service Manuals

Cyclepedia Press LLC - Motorcycle Service Manuals

Күн бұрын

Пікірлер: 13
@scowlsmcjowls2626
@scowlsmcjowls2626 10 ай бұрын
Thanks for removing the fear a bit! Il bit splitting a couple of honda vt500s soon enough🎉😅
@bruhdamartinasty3636
@bruhdamartinasty3636 3 жыл бұрын
This was fascinating. I don't know anything about fixing motorcycles. I was told that I need to replace the countershaft on my Versys 650 (worn splines) and it would require "splitting the case." It's going to be expensive!
@ahole5407
@ahole5407 2 жыл бұрын
Throw a little heat on the crank bearing and the case will slide off pretty easy. Sometimes the bearing will come off on the crank and you have to use some heat or a puller to get it off. All this is getting replaced anyway regardless because now it the time to do it while the cases are open.
@coughlan9602
@coughlan9602 4 жыл бұрын
Thanks for the video. Too valuable to be for free. What brand puller is that?
@Cyclepedia
@Cyclepedia 4 жыл бұрын
If I remember correctly the puller is an old Motion Pro. Its been a good one, many cases split and a few cranks pushed out too.
@eduardofeliciano9990
@eduardofeliciano9990 4 жыл бұрын
What tipe of puller is that were can I buy it ...I'm stuck on split the case
@Cyclepedia
@Cyclepedia 4 жыл бұрын
These are available from many places online, search for "motorcycle crankcase splitter tool" and you should have many choices.
@eduardofeliciano9990
@eduardofeliciano9990 4 жыл бұрын
@@Cyclepedia good morning I found the crank case tool ...does all of them come out same way I have a polaris predator 500 2007 I took all the bolts out an is still hard to separate the case an I dont wanna hurt it I'm just so lost a friend of mine broke the shaft of the water pump changing it there a bolt on the side where the sprocket goes do i suppose to take that out cause i try an try an dont come out but I dont know if I'm supposed to take that one out to
@Cyclepedia
@Cyclepedia 4 жыл бұрын
@@eduardofeliciano9990 You need to read over the repair manual for that model to make sure your not missing anything. Here is a link to a video about crankcase splitting also. kzbin.info/www/bejne/sJeqlZuKhrCesNU
@YouCantSawSawdust
@YouCantSawSawdust 2 жыл бұрын
What's with the nitrile gloves?
@Cyclepedia
@Cyclepedia 2 жыл бұрын
They're great for protecting your hands from oil & chemicals.
@dr.kawasaki7380
@dr.kawasaki7380 4 жыл бұрын
*Noise(nice)* ;)
Tusk Motorcycle Crankcase Splitter Tool
8:31
Rocky Mountain ATV MC
Рет қаралды 100 М.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.
A NORMAL DAY
12:38
Angel the Lady Mechanic
Рет қаралды 1,1 М.
How to: Xr250R Crankcase Tear Down
14:38
Weekend Adventure Rides
Рет қаралды 15 М.
Trx400ex Bottom End Part 1 How to Split Cases
27:12
GarageMC
Рет қаралды 8 М.
How to change motorcycle connecting rod kit crank.
6:31
Paul X
Рет қаралды 900 М.
🔥 Stunning 2-Stroke Engine Rebuild & Restoration | 1996 RM250
19:13
10 Things You’ll REGRET Not Doing to Your Motorcycle
24:47
Donut
Рет қаралды 2,5 МЛН
How To Install a Dirt Bike Crankshaft using the Tusk Crank Puller/Installer
10:08
Rocky Mountain ATV MC
Рет қаралды 143 М.
TWO WAYS To Remove and Install Crankcase Bearings And Seals
20:39
Brian D. Mobley
Рет қаралды 78 М.
Motorcycle Bottom End Rebuild | Part 2 of 3: Crank & Bearings
8:22
Rocky Mountain ATV MC
Рет қаралды 1,1 МЛН