DIY Cutting A Windshield - This is the second attempt at cutting a windshield

[@okiedoak201]

As a glazier from the past....the method you are using is correct....2 things.....first the two cuts need to be exactly over each other....and second..... use 99% Alcohol. ....kerosene will also work for the heat source. Well done..

[@the-original-glass-bender2840]

Always use oil or kerosene on the glass before you cut.You have to keep the cutting wheel cool. 25 years in glass

[@JamesDoylesGarage]

Thanks for showing us this !

[@mscocopiyal3112]

I hope to try this one day... nice..

[@the-original-glass-bender2840]

And use denatured alcohol. It will also eat through the lami.

[@xdeadwrongxdeadwrong7181]

Nice video. Don't take this wrong but your hand pressure is slightly too much force...also use mineral spirits as a lubricant for cutting...or you could use all-in-oil Or transmission fluid..it's nice and thick doesn't run fast.

[@miguelangelosoriochong5888]

How to cut a windshield (accord 2002) for honda accord 2003? . Nice vid bro

[@AgentOffice]

good