DIY: EASY F150 Leveling Kit Spacer Install, No Specialty Tools Needed!!!!

[@elis51501]

Did mine today, and don’t forget to spin the strut base 180 degrees due to the spacer rotates the bolt pattern by that much

[@chrifaranaudo123]

How do you spin the strut?

[@HighCountryRambler]

Your tire shop did you a favor by swapping out those lug nuts, not sure why their not recalled. My 2015 F150 got so bad when I hit them with the impact every one spun to the point nothing (I had) would break them loose. Same thing happened to my son's Jeep, both ended up in the shop costing $$ to rectify. However you can find a set for each wheel online for about the cost of one nut at the tire shop. Great video, I like not removing the hub.

[@brycedowney4806]

Did you have to get an alignment

[@Klipnotica]

Well this is ALOT easier then how I was going to go about it haha. Thanks for the vid

[@23tails15]

My 2' level still have rake I think 2.25 to 2.5 is for nearly perfect level

[@TyRC12]

Yup, if you measure it comes to 2.5" Perfect

[@elis51501]

Great instructional video, I’ll be doing this tomorrow:)

[@Arsonlarson8168]

Did you have to change the angle of the struts to get them to realign?

[@ostfrontbrickace]

In this case no, with the space on you basically change the strut 180 degrees. You will not have to worry about the compressed bolts on the bottom of the strut if you replaced them with a hex head bolt and nuts.

[@Freddy3]

Did you re-align your headlights? They are going to aim to high now.

[@ep4082]

Did you have to Aline your truck after ?

[@KravasGarage]

I did not, however it wouldn't be a bad idea to have it checked..

[@dasmurfy92]

What year is that z28 next to the truck..btw. I also have 2018 F150 and gonna do the samething

[@lodogg220]

I got a 04 f150 i want to put a 3inch leveling kit off amazon, But i also recently put in new oem front upper ball joints and new control arms So my question is would it hold up the lift on stock suspension parts ? And stock wheels

[@ryanzuber6254]

Did you have to turn the strut 180 or did you just swap the driver and passenger struts

[@chrisgonzalez5701]

I just bought the rough country 2 in lift with the lifted struts do you think I can do this without taking out the whole arm? Or do you think it’ll be harder to put the new strut it without take off the whole assembly? Thanks for your time

[@nick-trish]

Go ahead and pull the cab and engine off the frame! Those are the only unnessesary things you have left to remove! Lol

[@suqmadiq68]

Just get the Bilstein 5100s. The stock shocks are garbage.

[@hansmeizinger8840]

Why did Ford go to the studs instead of the bolts

[@GLP3]

Great vid.. Picking up a 2018 Lariat special edition 5.0 this week

[@lucasolivera6614]

Cool video! What tire number you have?

[@lucasfairbanks]

Are you interest in selling your headlights?

[@bensloter4986]

Looks good! What tire size do you have on?

[@miguelcenteno1able]

What brand are the spacers, that you don't have to decompress the springs?

[@brencamcambren6487]

That was a 1 inch level kit?? I want to do mine but not sure what size. Mine is also a 2018

[@KravasGarage]

1.5", still has a decent amount of rake, did a 2" kit on another truck and it still wasn't actually "level".

[@craigjacobson158]

give us particulars on tire size, etc

[@johnyoungiv6494]

Where’d you get the leveling kit?

[@joemcpherson8161]

Did you switch struts around between sides? So the old driver side is now the passenger side

[@KravasGarage]

I did not end up swapping them side to side.. I was about to twist the lower pins in the bushings to line up correctly after flipping the struts..

[@chevytahoe9430]

No alignment needed after?

[@elijahflint2101]

what were the torque specs for everything you unbolted?

[@KravasGarage]

Tight.

[@scottthompson117]

Where did you purchase the black and Red f150 lariat badges?

[@KravasGarage]

They are factory "Special Edition" badges.

[@ichabodvandam-wu2677]

Excellent video!

[@KaleHD]

hey man good vidya 👍

[@wilfredbilly3771]

What size tires are those and what kind of BFGs?

[@KravasGarage]

275/60r20 BFG T/A KO2s

[@DillinWebster]

wow looks good

[@ceasargarza2797]

Whats size BFG tires are those??

[@KravasGarage]

275/60r20 BFG ko2

[@thecataclysmitician4661]

Why can't you just compress the spring and install it that way?

[@stephenrickettsNL]

Did you need to grind the top original bolts where they were above the spacer?

[@KravasGarage]

I did just to be safe so I didnt risk having to remove the struts again..

[@stephenrickettsNL]

@@KravasGarage Thanks for the reply. I figured it was best as well. Happy with the install still??

[@KravasGarage]

@@stephenrickettsNL love it, still just a touch higher in the rear, but far better stance than stock without looking like I NEEDS bigger tires.

[@tp5401]

Is it 4wd?

[@KravasGarage]

Yes

[@QueenCityBeerTube]

Looks good, those black rims are nice. Put a 1.5 inch motofab level on my 2020 STX, leveled it out perfectly 39 inches front and back.

[@orvillemaen]

Awesome look!!🇺🇸