❤great result! You were ahead of the game by 3 years!
@MicheleCervantez22 күн бұрын
Super laborious. You have great patience.
@marshall.M Жыл бұрын
I watched so many "fake wood on MDF" DIYs... Your's the best. It looks awesome! Thank you for this tutorial. ❤
@marshall.M Жыл бұрын
I would like to redo my bed, which I paid a lot of money for. Yes, it is made of MDF, but it looks like wood (sort of). It is laminated with a wood-like layer. The frame has been through some wear and tear. Some spills have caused the MDF to swell. I know I need to sand it now, but since the MDF has a layer of laminate, how would you go about it? The color is walnut, but I would like to change it to grayish whitewash.
@GSDMomma6610 ай бұрын
Wow! Just what I was looking for. Awesome tutorial❤
@NajmaRhoda Жыл бұрын
Exactly what I was looking for. Thank you SO much.
@kimberlymeredith-jeffery58762 жыл бұрын
An excellent teacher! Thx for sharing.
@dennisehileman75922 жыл бұрын
This is perfect! Such natural wood grain Thank you for sharing!
@lucandsue3 жыл бұрын
put a few nail holes in the rim of paint can you will never have paint collect , and you can have a nice seal on your lid
@leahf1870 Жыл бұрын
I loved your tutorial. This is the best faux wood technique I've seen and looks amazing. I'm wondering how to continue the pattern when the planks are long..the whole length of the table. Thank you so much. It was explained so clearly
@rokkrrofficial3 жыл бұрын
You are an amazing artist! Thank you for sharing your talent!
@cherylmacedo55213 жыл бұрын
You are such a great instructor Brittany !!! Amazing job !! 🥰
@chrispursall52583 жыл бұрын
Definitely a true master in the art, fantastic job, well done, all the best, watchin from the UK.
@isabelordonez3692 жыл бұрын
WOW the best video!! Great content I feel confident after to watch this video. I will do a sample first 😊THANK YOU!!
@kerimadsen152811 ай бұрын
Hi. I know you said that the first and dark glaze layers are a combination of the two paints, but I can't figure out if you also add glaze to that mixture. I might have missed something. Could you verify what (an what proportions of what) goes into your glaze layers? Thank you.
@ZussieMakesit2 жыл бұрын
Thanks for the detailed tutorial I’m going to paint a set of pantry doors to look like white oak so hope it all turns out good 😃
@Hillaryalsbury2 жыл бұрын
I'm going to modify this so I can do it large scale and my MDF subfloors are getting a bougie makeover! Thank you!
@explaincauseidontgetit3294 Жыл бұрын
How did they turn out?
@Amadeusfly2 жыл бұрын
Fantastic video and great technique. I'm wondering how this will work on a cement ceiling.
@christinatorres4872 Жыл бұрын
Great video. Thanksn
@iamlove25312 жыл бұрын
What is used for the glaze layer after first 2 coats of paint? You just reference "glaze" but never state the recipe or product. Thx!!
@astamalciute3 жыл бұрын
Wow this is incredible tutorial ♥️
@stellabell8142 Жыл бұрын
Amazing
@ST-jw1uq9 ай бұрын
I used this tutorial. I wish the over glaze wasn’t so light. The results on my cabinet made it look way too light and it missed the warm wood tone. Wish I would have realized before I finished. I would have mixed less white in.
@kimlaffoon5039 Жыл бұрын
Kitchen cabinets too? I have the 90's golden oak that I want to refinish in light oak.
@monicam31512 жыл бұрын
Do you have a link for all which products you used?
@marybethwilson95492 жыл бұрын
What is the recipe for the glaze in step 2?
@salmadoes_9 ай бұрын
i LOVE this😳❤️ did you use an oil based paint all the time?
@shawnwolfe7237 Жыл бұрын
How would you go about doing this technique on a 4 poster bed frame…lightening up dark wood?
@jamiekirk22093 жыл бұрын
Brittany , I have one question on the top coat. I tried the MYOB on my first table and did not like the shiny finish. I cleaned it 3 times with clean slate trying to remove it. But then had to sand it back a little to try and knock down shiny areas. I applied the matte sealer but still see shiny areas where the glaze went on. How do you remedy if you use the toning glaze in areas then want a matte finish?
@fiaf33952 жыл бұрын
Such a great tutorial in such a small frame size 😩 why doesn't the video fill the screen??
@rainrichards80683 жыл бұрын
So damn helpful , thank you
@llc19763 жыл бұрын
Wow!
@tinapapandrea91142 жыл бұрын
Java?? Why What brand are you using Java? You can not see the brand?
@courtneyjackson6921 Жыл бұрын
❤❤❤❤
@leehirschman4732 жыл бұрын
❤️
@nfinance2 Жыл бұрын
it's too bad you didn't film this in high resolution. You should make another video in HD
@KellyBrown-jg1jz2 жыл бұрын
Great video, but your sound is not consistent.
@GOLDFOLDS111 ай бұрын
'more coarser' steel wool... hahah ok. how about, COARSER steel wool, hmm? english is doa i'm afraid with this house frau