Рет қаралды 14,098
Another episode of Fun With Fiberglass :) Today we will show you our preferred tools and process to replace a Fender Section by Grafting and Replacing fiberglass sections on a 1963 Split Window Corvette. We started working on sectioning in new rear fender lips where the old ones had been reshaped for larger tires in the past and lower front fenders.
Here is a shopping list of products used in this video:
West Systems Six10 Thickened Epoxy Adhesive amzn.to/2IxzbQH
West Systems 105-B Epoxy Resin with 205-B Fast Epoxy Hardener and Mini Epoxy Metering Pump Set amzn.to/2p1NqGL
West Systems 105-B Epoxy Resin amzn.to/2p3mHtt
West Systems 205-B Fast Epoxy Hardener amzn.to/2mJSyP6
Sunmight 01406 6" 80 Grit Hook and Loop Disc amzn.to/2nkIRXL
Sunmight 01408 1 Pack 6" No Hole Velcro Disc (Film Grit 120) amzn.to/2nyur6j
4.5" x 7/8" Premium High Density Jumbo Zirconia Type 29 Flap Disc 80 Grit - 10 Pack amzn.to/2nkQs8J
PORTER-CABLE Angle Grinder Tool, 4-1/2-Inch, 6-Amp (PCEG011) amzn.to/2oUuR7d
PROSHI 3-Inch Mini Air Polishing Kit 3-Inch Mini Polisher amzn.to/2nuuGiI
(Full Case of 100 each - Quart (32oz) PAINT MIXING CUPS) by Custom Shop amzn.to/2nl3gMl
Plastic Mixing Sticks amzn.to/2nvhbiO