DIY Garden Trellis

I decided to remake one of my first videos on building this trellis after receiving a lot questions about the build. The original was poor quality to say the least.
I recently posted the long form of this video as a part of a series on woodworking business... This video is for the folks that aren't interested in the business and marketing side and just want to build for themselves. I'll include the cut list below.
★ Plans! All plans include exploded views, cutting layouts, and easy-to-follow step-by-step instructions.
www.matthewpeech.com/
★ The New Outdoors Channel! / @pale-horse-outdoors
★ Support the page and join the community!
/ matthewpeechwoodworking
Access to behind-the-scenes content, plan of the month, Q&A, Early access, and tons more!
★MPW DISCORD! / discord
Our Discord is a place where you can chat with like-minded makers, share your brags, and ask questions about anything woodworking.
★ THE BRAG BOARD! Share your brags and view brags from other makers!
The brag board has its own discord channel where you can post, view, and comment on builds. Just follow the Discord invite link above!
★ Subscriber Discounts! (Affiliate links help to sponsor the content)
-------------------------------
The Most Comfortable Mask I’ve Ever Worn!
RZ Masks
15% off with promo code: PEECH
www.rzmask.com/m3
-------------------------------
Love my hearing protection!
AXIL Electronic Hearing Protection
Get 15% Off With Promo
Code: MPWOODWORKING
GSX 2.0
goaxil.com/pages/gs-extreme-a...
--------------------------------
MaKRS
Stain Pad - amzn.to/4aL7Aa8
Stain Sponge - amzn.to/442ty5A
Tack Cloth - amzn.to/4aG9XL2
--------------------------------
★Proudly Supported By / Partnered With:
Carhartt - Check out the latest Deals!
carhartt.pxf.io/NKWbyO
Kreg Tool - www.kregtool.com
RZ Masks- www.rzmask.com/m3
---------------------------------
★Links to tools you may see in my shop (Affiliate links help to sponsor the content)
Dewalt 1 1/2” forstner bit amzn.to/3u25YIX
25pc Hanger bolt amzn.to/3SAEuna
T nut amzn.to/3u8Sv1Y
Router amzn.to/3UiqJL1
Hammer amzn.to/3ru3YDU
CA glue amzn.to/3bu8RbR
Glue bot amzn.to/3cnVM44
Kreg Pocket-Hole Jig 720 PRO, Blueamzn.to/3trFHkt
Dewalt Jig Saw amzn.to/3tGmkUS
Tin snips amzn.to/3UhSMdn
Tape measure amzn.to/3tF1IME
Pencil amzn.to/3PePbHX
Dewalt cordless orbit sander amzn.to/3qmYc7t
Swanson Square amzn.to/3TgUgSx
DEWALT 20V Max Cordless Drill Combo Kit, 2-Tool Drill Driver/Impact Combo Kit
amzn.to/3Kh5OAE
Dewalt Brad nailer amzn.to/3cEjysY
Dewalt Brad nails multipack amzn.to/48IfRdE
Glue bot amzn.to/3wHSFKT
Titebond III Exterior wood glue amzn.to/36HHBEx
DEWALT Compound Miter Saw- amzn.to/3fqkIWX
3M Cubitron II Mixed Pack!
I finally found it!!! - lddy.no/1i8ua
Check out my Amazon Page for links to all the tools you see throughout my shop!
amazon.com/shop/matthewpeechw...
------------------------
Instagram: / matthewpeechwoodworking
TikTok: / matthew.peech
Facebook: / primitivemillworks
KZbin: / matthewpeechwoodworkin...
Let’s Work Together
www.matthewpeech.com/
Cut List:
5/8" x 1 1/2" x 72" (5)
5/8 x 1 1/2" x 34" (1)
5/8 x 1 1/2" x 12" (2)
Hardware:
1 1/4" Deck Screws
3/8 x 4" bolts and nuts (2)
#DIY #build #woodworking #palletwoodprojects pallet wood projects

[@MatthewPeechWoodworking]

I know I just released the business version of this video. This one is for the folks that aren't interested in the business side.

[@debismith8630]

Are there plans for the jigs?

[@jamesbarlowjr.3762]

@@debismith8630 Yes plans would help us get started for sure. Hope he responds.

[@queeneywarren9474]

Yes I need some for to plant food and roses

[@joshcox8689]

What is the hole spacing on the top 34” piece??

[@bryanwilliford7497]

@@joshcox8689 he measured it from the bottom up first board at 29 in second is 16 from that then 16 from that (it wasn't the way it was assembled but that's what I got from the video)

[@rydr911]

the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. kzbin.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.

[@jethomas232]

Matthew, I am a 71 year old retiree. I have enjoyed your videos and they have had a great influence on me. I have gotten off my butt and working in my garage making something. Thank you..!! I am productive again.!!

[@thomsonclaire8896]

Yea man you should probebly put down the bottle judging by what u sold me

[@jethomas232]

@@thomsonclaire8896 Are you talking to me ?

[@jethomas232]

@@thomsonclaire8896 Sorry but I don't know you and have never sold you anything.

[@redgiantvan189]

Awesome project. I just whipped out two of them for my wife's garden. Our neighbor saw me walking it down yard and now wants one for his garden.

[@johnmartin9090]

Built my first fan trellis today. I'm hooked ! You made this project so easy and fun for a beginner. Thanks for sharing.

[@outsidethewirevet]

Easily the BEST "how to DIY" woodworking YT channel! I just got some plans the other day and have started the 3 picket fence flower planter. Completed the fan trellis about 10 mins ago... It came out great. The jig, what a game changer in making it!

[@d.beaumont9157]

Brilliant, thanks for making the videos. I made the obelisk for one of my daughters and shes over the mooon with it. Im not going to work today, so as soon as my neighbours are up and moving around ill be in my garage ripping wood. Here in England, you dont see too many obelisk so it really stands out.

[@sdnlawrence5640]

I made twenty of these last month after watching your jig video. Took them to 1st Farmer's Market of season yesterday. Sold all of them out of my truck in parking lot in about an hour, before it opened. Didn't even rent a booth space! (I opted not to take orders, my ex may be right about commitment issues 🤔)

[@MatthewPeechWoodworking]

Now thats what Im talking about!!! People love these things!!!

[@alexreid4131]

Hey buddy. Can I ask how much you sold them for?

[@ThomasRZack]

How much do you sell them for?

[@tlt3079]

How much?

[@planetsforsale]

Terrific Trellis! Thank you. To help with the bending and avoid breaking, sit the bolted uprights in a container of water for a couple of hours before bending them. I found this worked a treat.

[@ronrolison1100]

Thanks for the tutorial! Made this for my wife’s birthday. Thank you for all you do. Have a blessed day!

[@jimeddy6251]

Made one for my wife for her birthday and she loved it. Planter box next up. Great job really like your teaching, thank you for your time.

[@robertbamford8266]

Great redo. Thinking the same technique could apply to some more exotic shapes, curves (but not too wild). Thinking of a gate with stave-built members. Thanks for the ideas.

[@GergC0521]

It was a great project. I bought the plans and I made one for the wife for Mothers Day. She really liked it. Before I assembled I used Australian Deck Oil to treat the parts and let them dry over night. Looks nice and will last outdoors a longer time. Also, I cheated, big time and attached the bending jig to a wall in the garage. Made drilling and screwing very easy.

[@KS-lj9ux]

Hey Matthew, nice video update. I had no problem at all making these from the previous video but what i did was make the middle board going across all the way to catch all the boards, just my preference.

[@MatthewPeechWoodworking]

Sweet! That’s the great thing about what we do. You can do you. 👌

[@ryanjelinek3738]

Hey Mr. Peech! Just wanted to give you a big thank you and send my gratitude! I used your video and the jig layout you have to crank some of these bad boys out and they’ve been selling well in my community, the extra money has helped me and my family out a lot with the rising gas prices, thank you sir!

[@tlt3079]

What do you get for them?

[@davidpingryn5628]

I made one with a charred effect using a propane torch then finished with an exterior clear spray finish. Looks great and really brings out the grain of the wood.

[@JaxCopper]

Bought your garden set of plans and built the trellis. Man it was easy to build utilizing you plans. I will tackle the obelisk next!

[@johnnyperez2087]

Thank you for going back and correcting the fan width from 38" -> 30". When I made this about a year ago, I broke about 6 slats from my 2x4's before getting 38". I will say that I cheated abit and opened up the bottom more to allow for more bend. I only ever made 1; materials cost was $25 when you add the wood, screws, bolts, etc. I tried to sell it for $50, then kept dropping the price $5 about every 2 weeks. I stopped dropping once it was at $25 since that would be "at cost." I've had clicks looking at it and some saves but I've only ever gotten 2-4 offers of $15. It still sits in my garage to this day as a reminder to keep trying and moving forward. :)

[@jdrjsmc]

My wife wanted short ones so I used some scrap cedar and made 2 small ones, I modified the spacing of jig screws and they tuned out beautiful!! Thx

[@mackenziemill]

Just built two trellis this week. thanks, Looks great

[@dazallen3324]

Built my first one yesterday, turned out great. Thanks from the UK. Keep up the great work!

[@MatthewPeechWoodworking]

Nice. Keep it up Daz!

[@jamesbarlowjr.3762]

@@MatthewPeechWoodworking Can we all have the measurements for the main jig to get us started?

[@NightHound86]

I made a few of these over the last few days. Today marks the day I got some in a store locally. Thank you for your awesomeness this is the start of something for my family.

[@leonardhiznay8367]

How much do you charge the store and what are they selling them for?

[@davidsimms2806]

Awesome

[@thomaszaccone3960]

Bless you. My rises are growing FAST. Needed a fast and easy design. Thus is perfect!

[@Michael-xd3hs]

Hey Matt, love your videos and have purchased many of your plans. I made this trellis for Christmas gifts for members of my family. I made a change that I think you’ll like, for the center horizontal slat I made it 22” so it goes all the way across.

[@jaxon8579]

Thanks for your videos. I built my first garden trellis this week. I used homedepot 8' 1x2's. I only had to cut 12 inches off of them. They were $2.20 each. I used 11 to build 2 trellis. So about $12 dollars each for wood. I made a jig and they took about 15 minutes each to make. I also took 2 boards 1' and 45 them. I put them under the top board centered to make a little roof / house look. If you dont have a table saw to RIP down wood this is a easy way to make them. The 1x2's measure out to 5/8th x 1 1/2". Watch for cracked boards when picking them.

[@MatthewPeechWoodworking]

Love it man. Way to think outside of the box. Furring strips are an awesome idea.

[@mcalixtro82]

Did you seal or paint the wood? I wonder how long untreated wood would last

[@jaxon8579]

@@mcalixtro82 I did not seal or paint it. The buyer will do it. Thanks for the question

[@sonjanorman4650]

What is the spacing for the screws on the jig?

[@jaxon8579]

@@sonjanorman4650 2 screws center to hold the center board. Then 9" and 18" from center each way.

[@donnabeckemeier266]

Thank you Matthew! I just made and sold my first 2 trellis'. I bought a treated 2x6 and I had one already. What I found is the wet wood was so much easier to stretch. I hope I don't find problems with that when it starts drying out.

[@richardmccann4815]

Most treated wood is southern yellow pine. It moves a lot, and knots can weaken things.

[@rjmason-si7xt]

Just made my first couple trellises. Watching your video made it easy for me to follow, keep up the good work with these videos

[@MatthewPeechWoodworking]

Great to hear!

[@obxsurfandsoundfishing4085]

Just finished making my second one!!! Thank you so much.

[@MatthewPeechWoodworking]

Thats awesome! No worries!

[@stevenlarson6125]

I think I'll try these. For the jig though, I think using removable pegs/dowels instead of screws for those outside ones and set dowels for the inner ones might be an idea

[@donavanmcelroy6263]

That’s a great idea!👍

[@kellyjohnson8765]

Matthew, I love your channel and after watching several videos I found the garden trellis and thought I would give it a try. I made a few adjustments to make mine work, but I am well pleased for my first one. I am off to market it tomorrow at my nursery. I will attempt to upload the picture

[@MatthewPeechWoodworking]

Sounds great!

[@DaddyHexler]

You're the MVP. Love your channel my man big love to you and your family. I made the jig yesterday and I'm going In to work today to use the table saw and cut my timber. Will let you know how it goes

[@MatthewPeechWoodworking]

Thanks Lee! You have the hard part done!

[@jamesbarlowjr.3762]

Hi Lee, can you tell me the measurements for main fan and what size board and how far each screw is for the fan? Thanks

[@michellebloker4931]

Hey Matthew! Thanks so very much for all your videos! I am 68, a gal and a little disabled.. however, I have downloaded and started building trellis and planters! How can I share how much I appreciate all your positivity and encouragement? well I can tell you right now and share your site... Will post brags! All the best, my friend to you and yours! Sincerely, Michelle from the mountains of eastern Oregon.Big Smile!

[@rickw6521]

@ Matthew Peech Just a tip on the jig, at the butt end i added two 5/8x11/2x 6 inch strips going up to hold the trellis instead of screws. I screwed them to the side of the jig. It keeps it real tight. And i also clamp it down at the butt end so it won't move. And for the fan i use dowels instead of screws.

[@skigglystars9525]

Amazing content. Keep up the great work and thank you so much.

[@jekjr1957]

I greatly appreciate your videos. I build 5 of these today and they turned out good. I had some not so good yellow pine. Only issue I had was using the jig with the screws like did my bottom boards would split. I had to pre drill them also with a small bit to get them to work. All good otherwise. Thanks again.

[@larrystone5749]

Good video and job thx for sharing and the info It will look great in my garden

[@tomatha3713]

Great tutorial, I'm in the shop now getting ready to batch out a few of these. Just wanted to mention that you said that the long cross piece is 34" long, but I noticed when you have it laying on your bench mat it appears to be 32" long.

[@richpalmisano1740]

Mr Peech... I followed the guide and made these from picket wood using the 1 3/4 slats used for building the 3 picket planter boxes...takes two pickets. I'm pumping these out, takes about 10 minutes with pre cut materials. Looking forward to getting these out in my area!0

[@porkchop3094]

I made a 12' trellis out of treated wood from a 2x6 and it looks like crap. Now that I saw your video, I will look like a pro the next time I built one. Thank you again for sharing your knowledge to once a month weekend warriors as myself.

[@garydetrick4044]

It took me a little while this afternoon but I finally got the jig set up the rest was a piece of cake thank you very much

[@jamesbarlowjr.3762]

Hi Gary can you please give me the measurements for the main jig board and how far from the outside edge… the outside screws are and so on? Thanks. I’d love to make one but need measurements. 🤝

[@ralphesquer7778]

Hi Gary, I would also be interested in having the measurements for the jig.

[@garydetrick4044]

@@ralphesquer7778 I’m at work right now I don’t remember measurements of the top of my head but I’ll try to get them for you

[@jonw6376]

Very cool! I'm definitely gonna research the local market for these. Thank you!

[@felforgedaxe9793]

You are a great teacher! Thank you for sharing.

[@maniedutoit1040]

My man never disappoints💪🏻

[@briansnodgrass2895]

Lol, the last video you made on this was awesome. I probably made a dozen of them. It was a good project, sir! Ty👍🏻

[@user-sg8rz9nv9r]

Great video ! Thank you Matthew!

[@bobcansee]

Love this project!

[@YourMom-yu4mq]

Thank you Matt! Made 5 of these today along with the jig. Going to sell them at the farmers market tomorrow.

[@ralphesquer7778]

How much did you sell them for?

[@katherineharison7302]

What are the measurements for the jig?

[@tylertibbetts207]

I’m having the hardest time with the jig

[@CLove511]

Anyone looking to build the jig, here's what I did: 1. Cut a 2x4 to 61" 2. Cut a 1x3 furring strip to 32" 3. Cut a "1x3" rabbet into the top of the 2x4 so the furring strip rests in it, making a perfect T. (Optionally, make dowels in #6 a bit longer) 4. From the center of the furring strip, measure 15" in both directions and make a mark. Repeat with 7 1/2", so you have 5 marks including your center. 5. Use a 1/2" forstner bit to drill 1/2" deep holes at 1" from the top, just on the *inside* of each mark (The *edge* of the hole is at each mark). 5a. (Optional) drill holes on either side of the center mark 5/8" apart (5/16" from center mark to each hole's edge) 6. Glue 1"-long 1/2" dowels into each hole (Protrudes 1/2"). 7. Attach furring strip squarely on center in the rabbet with screws only for easy disassembly and storage in off-season (Check for square) Final dimensions: outer dowels 30" apart at 60" from the base, inner 15" apart. Using dowels instead of screws took a bit longer, but had some benefits: a) It doesn't mar the wood. b) At 1/2", they are tall enough to hold the wood, but short enough that they're easy to lift over (You don't have to screw something in while holding it) c) You can set the trellis lower on the jig while bending so there's less tension on the arms, then slide it "up" into place.

[@i.am.a.real.baptist.brider1979]

thank you

[@tylertibbetts207]

I have no idea why, but I’m having a super hard time with the placement of the screws on the jig to get the fan to look correct. The other issue is when I pre drill the cross pieces they rarely line up, I’m obviously doing something incorrectly…so frustrated….thank you for this post, but I’m still a bit janky 😢

[@CLove511]

@@tylertibbetts207 Don't bother to pre-drill the holes, I made a batch of five and pre-drilled all of the holes on the cross pieces with a guide. The holes didn't line up the same on any of them so I had to force them into place anyway. It's something to do with the way each board is going to bend, so It's not that you're doing it incorrectly, it's that not all wood grain is identical. For the screws, I recommend using dowels instead, just feels more accurate. In the end it doesn't matter as long as all of them are equidistant and square to the long board -- find your center, measure 15in in both directions, then another 15in and that's where your screws should be (-30, -15, 0, 15, 30)

[@tylertibbetts207]

@@CLove511 huge help! Thank you Tremendously

[@tylertibbetts207]

@@CLove511 this just does not come easily to me, I want it to be appealing and not like a hack made it. How do you keep the middle “piece” dead middle? The measurements you sent? I’m assuming that’s how. Which side of the middle “0” at you putting the piece on the screw which side

[@alexreid4131]

Smart to post an edited version without all the business side of things. Your content is awesome brother. We have a local market style sale event coming up in April. I’m planning on making three of the things you make and seeing how they sell. I’ll update you after 👍

[@MatthewPeechWoodworking]

Yea I figured some folks just want to have some for themselves. Markets are awesome. Build Small’s to go with large items. I’m going to do a video on it. Something $20 or less. Everyone has atleast $20 at these sales. Small’s add up fast!

[@alexreid4131]

@@MatthewPeechWoodworking awesome tip brother and I’ll look forward to that video. If you see this in time what’s your top tip for a small $20 item? Bird house/feeder? Figuring a few Corn Hole boards might be something people might want heading into summer also. Might be wrong in that.

[@jeffjohnson2977]

Matthew Peech how long before the 20 dollar smalls video come out, any idea?

[@sandraclark8413]

I want to try this for my dahlias thank you for your wonderful videos.

[@MatthewPeechWoodworking]

My pleasure 😊

[@Oh6Torch]

Anyone doing this; to prevent breaking the outside ones, wet them down. Water swells the lumber and makes it more pliable. Hot water is best. Hope this helps someone.

[@larrypowell1085]

Hey Matthew, just want to say thank you for helping me think out side the box. It really helps that you find a way to get the most out of the cheapest materials. I have been into wood working for 20 plus years and has most of the fancy tools that a wood shop would need until everything has stolen. With that said I am slowly replacing these tools. I would ask if you could touch on two things in the future . First could you talk about staining and how to make the barn wood ( white ) look distressed. The other would be anything to do with hand engraving ( no laser or CNC ) . I also engrave metals and real animal skulls. If you have any tips on applying this to the wood working projects you do. Thanks Larry Bone Taps

[@danielnicholson6174]

Thanks for sharing the video it's a great idea if these sell in your area well, I tried advertising some here I'm Melbourne and they proved as popular as covid, although it is winter time

[@22busy43]

I plan to make a few of these for my back fence to grow some scuppernong vines on.

[@MatthewPeechWoodworking]

Nice!

[@SBChevy]

My oldest son questioned me on this video … “Pop? Why does he use screws? Nails or staples would be quicker AND easier” … I’m passing this question/statement on to you Personally, I prefer screws. I feel that they make for a longer and durable construction.

[@brainwashingdetergent4322]

I made these, made some jigs too. It took me an hour and ten minutes to make four of them. I’ve posted to FB market place. These are the first wooden things I’ve made with the intent to sell. Started the listing at $100. Not sure how long to leave at that price without them selling before I lower it. Thanks for sharing! PS I didn’t really pay attention to the measurements and ended up leaving mine 96” long. It’s all spaced correctly for the 96” length, just thought I’d throw that in there.

[@cathyhardy8206]

How u make jigs

[@andrewdominowski4631]

Have you sold any for 100? In my area there’s couple listings for this. One for 80 and another for 50. I’m thinking 60

[@brainwashingdetergent4322]

@@andrewdominowski4631 no, not at $100, or $80. I’m going to lower to $60 Monday and see how that goes. All I have is a menards and ace and ace doesn’t sell wood trellises and menards sells some super janky mass produced one anywhere from $20 to $40 bucks.

[@mcalixtro82]

@@brainwashingdetergent4322 any update on any sales?

[@jamesbarlowjr.3762]

@@cathyhardy8206 That’s what I’m waiting on as well Cathy. We have to have the Jig to make them. Or if you found out could you please let me know? Thanks

[@jimmarino4292]

Great channel Matthew. Love your projects and your instructions. Could you please tell me the screw spacing on the top brace of the trellis and also the screw spacing on the jig for the top of the fan of the trellis. Thank you so much

[@rodpotts2666]

So that video last week was a older one. I’m going to build about a dozen next week,to see how they do. Thanks man!

[@MatthewPeechWoodworking]

No rod... I posted one about a year ago that was recorded on a cell phone. The one last weekend was more of the business side. This was just the build.

[@rodpotts2666]

@@MatthewPeechWoodworking ok cool, I’m with ya now.

[@michaelrobb9708]

How did the sales go? How much did each go for?

[@jakeforbis8897]

I love your channel, I'm new to it, and you inspire me. I have a question, have you done a video about how to make the jig for the garden trellis?

[@tylertibbetts207]

This would be a huge help!!!!

[@rdrobertssr]

Have you considered using wider lumber 10 and 12 inch boards for straighter grain on the outside edges of the board meaning is stronger.

[@SignorAveya]

Fantastic upload friend keep it up 😊💗

[@shanethomas323]

Another awesome video! Are you using regular 2x4s or treated?

[@piousminion7822]

I'm sitting here trying to figure out how you got 5 - 5/8" boards out of a 2x4... and then I remember thin kerf blades exist. The math checks out now. :P

[@queeneywarren9474]

Did a great job thank you now how do you build the trellis jig I would love to learn this

[@jamesbarlowjr.3762]

Lol I’m waiting as well.

[@ryanmotty920]

Hi Matthew, i enjoyed your video had some good info. I do have a question for you about the middle cross beam. My question is why don’t you catch all 5 with the middle cross as well ? Wouldn’t that give the outer bends more support primarily in the middle ? Just something that crossed my mind about this.

[@FEMADEATHCAMPCONTROL]

Great stuff. That centre horizontal would be better spanning the whole width though, aesthetically speaking.

[@rdrobertssr]

On your gig for the fan, have you considered using a hole and a dowel pin for the second spread and not a screw?

[@jonahshupert1329]

This is what I did. Works well, no damage to the project material and no tools required when you go to bend the 2nd board. I used 3/8" oak dowel because that's what I had laying around. Probably over kill

[@lloydosmondjr1]

Dude, I had a piece of 2x4 that I cut like you said in the video. Followed all your steps. My 2x4 was 65" long though, and when I spread the boards apart the one board on the outside, snapped off. I'm thinking that I may have bolted it together to tightly. Nonetheless my wife liked it. I may be able to save it, by clamping it and then bolting it back together again a little higher.

[@MatthewPeechWoodworking]

This happens. But bolt lower... higher makes it tighter. spread slowely and if you hear any type of sound of wood giving stop and unbolt. Put that wing in the middle. It has a stress fracture or a knot that cant be seen.

[@lloydosmondjr1]

@@MatthewPeechWoodworking Well Sir, I done good. I clamped the trellis above the break in the wood at the bottom. Drilled a new hole for the bolt and bolted it up. While it was clamped I toe (nail) screwed two deck screws in the bottom below the break in that one piece of wood. I then took the clamps off and managed to salvage the fan trellis. I was so happy that I went ahead and built a 6' high x 14" wide rectangular trellis with the cross members spaced 9" on center. I didn't do a video for my channel because it was my first one. The next one I built I'll film it. Thanx so much for your guidance.

[@JeradCarrier1998]

Hey brother love your videos great stuff.

[@MatthewPeechWoodworking]

Will do!

[@billshepherd5090]

Matt love your videos. Would you tell me the spacing between slats at the top of the trellis pls. I want to make a jig for it.

[@Pirate19501]

Made this today.

[@jasonhintz2835]

Love the videos. Quick question were can I get the plans for the garden trellis?

[@bwalters137]

Nice video. What did you use to stain or protect the boards with?

[@richardkelley8153]

Thankyou so much for this video. Following along, I made my 1st one. Showed it to a few friends...and started selling them. Have 6 sold already....

[@ralphesquer7778]

How much did you sell them for?

[@richardkelley8153]

@@ralphesquer7778 in my area, I get 20-25 unfinished(raw w/ water sealer, 35 finished(painted/stained w/sealer)

[@michaelwilson3588]

Great vid!! Ever consider doing a jig build video? very interested in how to build the jig.

[@MatthewPeechWoodworking]

The jig is pretty simple and is made when you make your first trellis.

[@andersonolive4553]

Thank you so much Matt! You don’t happen to have plans for the main jig for the fan do you?

[@jamesbarlowjr.3762]

That’s what I’m waiting for. You need the Jig to build it.

[@jessesleeper3167]

Though he gives the incorrect measurements in the voice over in the original video (kzbin.info/www/bejne/eGfQq2l5e8ZmkKs), just pay attention to the video and you can read the tape measure. The height of the crux appears to be 8" if you do the math from this new video (72" - 29" - 16" - 16" - 1 1/2" - 1 1/2" = 8"). I think there is enough between the two videos to complete the cross jig. This is a great tutorial and I plan to make this and all the jigs soon. THANKS MATTHEW!!!!!

[@andersonolive4553]

@@jessesleeper3167 Thabks for the reply! My brain doesn’t do well with math and engineering, even at the simplest level, so your advice really helps! Appreciate you and Matt!

[@rubenmaldonado3120]

I'm making my wife 3 of these. Thanks

[@fireman1780]

This is really cool. Do you make them out of 2x4’s like rip them down or which board are you using

[@davecobb385]

Matthew, How far apart are the screws on the top end? If you showed or told it I can't find it. I'm thinking if I get the top long cross board right the other 2 shorter ones will be good enough to make a pattern. thank you for your time

[@kenashley6993]

Hey Matthew, have you made avideo for making the jig and spacers. I would love to see it. Thanks

[@jeffreygledhill92]

Hey Matt question for this, and other outdoor projects you've made: What would you think of hot glue as waterproof feet?

[@karenbone8750]

Do you sell plans for your jigs? Thank you for sharing your wisdom!

[@lelandford9683]

Awesome, Plan on making a few of these for my mom and sister for their gardens as my first project... Question... you mentioned deck screws because they don't rust. Should the bolts on the bottom be a particular type to avoid rust also?

[@Ricks2Cents]

Nice Build. Just curious why the 2nd Brace didn’t go all the way across like the rest?

[@itchyego9]

If the Trellis is in the ground, what's the best way to not let it rot? It could be Treated wood, but in a Garden, some people will frown on that. Cedar is a good choice, but what other ways or wood would be the best wayto keep these babies holding up the Veggies? Thanks a lto Matthew and all the great views and commentors - Ken in Hawaii

[@Finding_Elysium]

Old video, and things have changed, so heed warning, I built 10 trellises, and have yet to be able to sell any both on marketplace and to most of the local garden/nurseries and outdoor places. Was asking 60 and have had to lower it to 45 to try and sell them. I've been sitting on them for a month and a half now.

[@jamesbarlowjr.3762]

Hi Matt, Me among other would like to see how you made the Main Jig as well. You need that to build it. Thanks.

[@jamesbarlowjr.3762]

Opps Sorry I meant to say, “We need that to build”. Haha. Thanks

[@douglasduda9826]

I was able to do 38" for the farthest outside 2 for the fan. I know the original video said 40 or so and some people had problems going that far. BTW I am all for trying to be as perfect as possible but the lengths of these do not have to be 100% perfect once fanned out you cant even tell if its slightly off. Made my first 2 and they look alright. I don't have a miter/chop saw yet that is next so they turned out alright. Now to sell them...After I add some kind of spike...

[@blackturncoat]

Maybe I missed it, but I can't find anything on painting the trellis. Especially when it comes to the treated fence slats, which are mostly rough sawn and not that easy to pain.

[@robertkat]

I would make them out of red cedar, lasts longer. Also dip the wood that contacts Earth in copper wood preservative.

[@jeffreygledhill92]

Hi Matt you pre-drill the cross braces, but do you pre-drill the vertical strips that the cross brace are on?

[@aaronmalone4540]

@Matthew Peech Thank you for all you do.. Ive bought several plans and started on some projects. Great videos as well. Ive got a question maybe silly one. The plans say 72" tall. At the end of the vid Matt says they are 7 feet tall. Thats 84".. Is it 72 or 84? lol. Mine seemed a little short once i cut the strips to 72" as compared to video of him holding the trellis next to him. I thought hes either really short or I cut them to short.. Sorry Matt! Also will the cross members work if its 84 as well as for the 72 or would i need to lengthen them for the taller one? Thanks!

[@martin8829]

Where do you get your 2x4x8‘ and what quality are they? In my area it’s so bad allowing dents bark on it

[@jasonfurniss1140]

What is hole spacing dimension on 34" cross brace. Luv this channel. Very inspiring

[@jerrymcdonald6445]

Great video, I really like your trellis jig. Do you have a video on how to make it, or plans for sale?

[@dlsddlsd]

Did you ever get the plans for the jig?

[@davecobb385]

Hey Mathew, I am a retired coal miner from West Virginia I follow your videos and enjoy them very much, I have made a few of the concealment shelves and now I'm waiting on the Mad Hatter. Any chance you will do a video on it?

[@MatthewPeechWoodworking]

Hey Dave... Nope... I'll never make another one lol. That was a rough one!

[@lukeprince7690]

Hey will this work for finish nails Or standard Outdoor nail gun nails also also can I do this project with 1 by 1 And 2 by 2

[@scottdepew3495]

On the jig, how far are the screws from the sides and how far apart are the others? Want to build one as soon as I know this

[@karensmith8452]

How far is the first crossbar down from the center board? Thank you!!

[@renedelatorre7724]

thank you