DIY GoPro Backpack Strap

[@Kolby9241]

Im did one with some velcro! The "rough side sewn to the strap of the bag, ordered a cheap backing for the gopro housing, and glued the soft part to the back of the cheap housing for easy hastle free removal and attachment. Ran a Marines PT with it and it stayed on the entire time!

[@amerfarhan4]

good idea

[@IntegraDIY]

For the revised version you should round off the corners of the cutting board, just so it's not square, and make it look a lot smaller than it is.. This is actually a good idea for vlogs and such using a small mic

[@Lutzboater]

Like it. I have some Starboard (Marine plastic) left over from a boat project that should work also. Keep 'em coming

[@kylemartin101]

Cool! That would work great, You should round the edges a bit too.

[@CajunImplant]

Mine came out GREAT! But how do I paint the cutting board material? What kind of paint sticks?

[@agill4375]

Cool DIY project. Would've been nice to see some example shots of what the GoPro captures

[@kylemartin101]

I totally agree, I am sorry I did not include any. If you look at this video you can get an idea of the kind of shot you will get with the backpack strap mount. kzbin.info/www/bejne/hnrOaX5smMl8pLc

[@TranceAddictFoX]

the hat clip works great on backpack straps too btw.

[@kylemartin101]

Nice!

[@outdoordave6304]

just a quick little mount I made for my kayak.

[@kylemartin101]

I love the look of your kayak mount, nice work

[@Tom13GN]

Thanks for bringing back the DIY stuff!

[@OkiFPV]

This is a great idea, but whats that mount you have on the GoPro? The one I have I cant bend back far enough to do this. So it looks like i need that special one with the foot on the back. Also I have a session so gonna have to buy something special i guess...

[@ratystast]

Nice project, I would definitely made one myself. I would suggest sanding rough edges with a file or sandpaper. :D

[@kylemartin101]

Yeah you could do a much better job of finishing the mount.

[@tmayberry7559]

Question how would you make this work using an old cellphone as a action camera

[@shaka6rkr]

easy, simple and good diy videos like ever

[@sibat777]

Kyle Not sure what you call them in US but if you replaced one nut and bolt set with large acco binder clip attaching the mount to the backpack would be a lot easier In fact you could get rid of the bolts altogether and use 2 clips Just a thought Garry

[@kylemartin101]

it is a good idea! Thanks for sharing!

[@madjohn3901]

Hi Kyle! Thanks for help. Did you have a videoshot with this mount? I would like to see how this work in action. Tks again

[@ArtBeHereNow]

Walmart has a cutting board in the camping dept that's thinner and lighter. Its working good. Thanks

[@kylemartin101]

Nice!

[@caasicam]

whats the big deal about having the camera mounted on your backpack? taking pics with a remote? or video with a remote? or just transportation?

[@ArtBeHereNow]

You must rewatch the video and listen to Kyles comments about that. It's actually right up front.

[@connorlynch5236]

I used the hat clip on the chest strap of my day pack for a great "diy" chest mount

[@JamieTenikoff]

Very cool idea dude! i might try this sometime. Definitely like the DIY builds.

[@kylemartin101]

Thanks! I will do what I can do keep them coming!

[@JamieTenikoff]

Kyle Martin Tech "GoPro Tips and Tricks" Sounds good to me. Might i also suggest that you add in some of the footage you got of the gopro when using the DIY mount?

[@joshuaaldana4018]

I've been using the bigger pole mount on my backpack for years now.. It works great.. But this is a great alternative

[@FACB25]

Nice , maybe try a black material and round off the corners

[@kylemartin101]

Yes this would make it look way better.

[@oliverpeachey897]

What was that blue clip on the GoPro?

[@kylemartin101]

It is the Sametop latch. I had one of my GoPro latches break and needed to replace it. You can check it out here: geni.us/yrM2

[@woodycoates]

What does the shot look like?

[@kylemartin101]

Sorry did not include sample video the shot will look like the one showen off in thsi video kzbin.info/www/bejne/hnrOaX5smMl8pLc

[@1991backintime]

Is it comfortable?

[@kylemartin101]

yep, you don't really notice it, If you have a backpack with a thin strap you might find the camera bouncing around a bit but with stiffer backpack straps this is not a problem.

[@spencercolby1902]

What is the clasp on that GoPro?

[@kylemartin101]

It is the Sametop latch. I had one of my GoPro latches break and needed to replace it. You can check it out here: geni.us/yrM2

[@dvidreis]

DIY are back? thank you :D

[@kylemartin101]

That is the hope! Now I just need some good projects ideas. I would like to have one DIY video come out every sunday.

[@kadegeddes4879]

Love the vids could you make a diy 360 swivel mount

[@kylemartin101]

Interesting I will definitely try to make one.

[@kadegeddes4879]

I have made one but it needs improvements

[@kylemartin101]

Send a photo! [e-mail] or hit me up on the FB page I would love to see what you have done

[@kadegeddes4879]

Ok

[@kadegeddes4879]

There I sent pictures And what I used to put it together

[@TRIXRFOKIDZz]

looking for a diy dslr camera clip. anyone know of any? similar to peak design

[@JackGordon]

Pick this up from the ONE DOLLAR STORE for a COUPLE of bucks?

[@JackGordon]

Still thigh great video!!! Glad the Diy mounts r back!!!

[@RoverConcepts]

Good video but it would've been better to see some shots from it. And I would sand the edges down and make it look more professional. Other than that I might try it!

[@kylemartin101]

I am sorry about the lack of sample video, it has a shot much like that of the Peak Design Mount.

[@amerfarhan4]

Thank you for this video. I was in need to this trick.

[@spencercolby1902]

Finally another diy!!

[@kylemartin101]

I know it has been a while... But they are back!

[@3AProductions]

That chopping board tho 😂

[@gabrielgabegarau5085]

As an idea, it's great. But the detail of termination is very bad.

[@alexskimo518]

Very nice Mount. Ty

[@AZREDFERN]

This is why I watch this channel. I don't like buying GoPro stuff because it's overpriced and under quality. I just drilled holes into a mount and sewed it to a strap, but this is great for a removable solution. Maybe put some grip tape or gel rubber on the back to keep from sliding?

[@kylemartin101]

That is a good idea! You should look at my video on replacing the adhesive on GoPro mounts. I use it all the time to save having to buy new baseplates. I hear you loud a clear. Based on the response to this video there are a lot of people that agree with you about wanting more DIY videos. I will do what I can to keep them coming, my hope right now is one a week released every Sunday. My challenge now is to find DIY mounts that worth sharing.

[@Skittl1321]

Really clever.

[@kiatlc]

2019-2-1 首次阅览 拍得很好，继续加油

[@clanelliott0305]

More Please

[@MattDiresta]

great! more diy!!!

[@brunogarcia8320]

More DIY!!!!

[@kylemartin101]

I hear you! I will do what I can to keep them coming!

[@NickAinsworth7225]

Awesome!

[@kylemartin101]

Thanks!

[@max3504]

+Kyle Martin Tech "GoPro Tips and Tricks" can you do a unboxing and review of the hero session and hero + lcd plz?

[@edwardvera7164]

Awesome thank you!!!!

[@goprotipsentricks148]

realy good i like to sie more

[@huttergraphics6630]

More!!!!!!

[@kylemartin101]

Will do! You should see one every Sunday

[@ryanvoyten5211]

More DIY vids

[@kylemartin101]

Every Sunday!

[@maxdolbinin]

Diy mouth mount

[@sporttuttle3252]

Cool mount..........FIRST