DIY Heart Ring: Day 3 of 10-Day Wire Ring Making Challenge

[@Nini-zz5hb]

such a simple and yet beautiful ring! And the story of how you came up with the design was adorable ❤

[@HeatherBoydWire]

Thanks so much Nini

[@kristinavincent3843]

this is so cute and looks easy!! My next project for cat loving daughter!!

[@HeatherBoydWire]

Have fun with the rings.

[@cloudysubliminals1720]

I will definitely try this when my wire comes ❤️

[@HeatherBoydWire]

Awesome. Good luck with it!

[@jyotiyadav8534]

Wonderful Art Wor

[@kerryd25]

SO cute! I love how you are so chill with your instructions. Makes it so much easier to follow when it doesn't HAVE to be perfect!! : )

[@HeatherBoydWire]

Thanks so much for your lovely comment Kerry!

[@Luvmeesh]

Gratitude 🤍💗✨

[@HeatherBoydWire]

Thank you.

[@benancialopez6894]

It is very pretty. Thank you very much. God bless you

[@HeatherBoydWire]

Thanks so much Benancia.

[@probablysandi5869]

You think this would be possible with a paper clip?

[@HeatherBoydWire]

Hi Sandi: I did this heart ring with a paperclip: kzbin.info/www/bejne/rWineZR4ZdieZ68

[@sabinaazzahrarisky2916]

Thanks for the tutorial, it really helped me😆

[@HeatherBoydWire]

So happy it helped Sabina.

[@rebeccasmith4075]

I absolutely love this I am going to tempted to do it.

[@HeatherBoydWire]

Thanks Rebecca. Hope you make some!

[@nancyalania5758]

You are amazing!!!!! Love it!!!

[@HeatherBoydWire]

Thanks so much Nancy.

[@tatumthompson4001]

this is an actual really good idea for me to start doing since i keep on getting my rings from Claire's and i'm getting tired of doing that and i saw this stuff idea on pinterest and was like wow since I do love to make jewelry.

[@HeatherBoydWire]

Thanks Tatum!

[@tatumthompson4001]

@@HeatherBoydWire you’re Welcome 😊

[@nancysaccoccio1846]

I love this♥️

[@jyotiyadav8534]

Wonderful Art

[@HeatherBoydWire]

Thank you Jyoti.

[@ashadominicafernandes3138]

Superb Mam .Just loved it. Will try it soon .God bless.

[@HeatherBoydWire]

Thanks so much Asha!

[@angelinacenata62]

I want to make these but is the wire 0.8mm?

[@HeatherBoydWire]

I use 20 g or 18 g which is about .9mm and 1mm.

[@angelinacenata62]

@@HeatherBoydWire oh! Does it still work on 8mm?

[@mercyraj0160]

Very beautiful and too creative 😍😍😍

[@HeatherBoydWire]

Thanks so much Mercy.

[@truespiritz]

💗💗 love it

[@HeatherBoydWire]

Thanks so much Clariss!

[@Rammohan0000]

Hey mam it's looking so cute and i am gone a try this and your fan from India love you mam 😊😊😊😊😘😘😘😘

[@HeatherBoydWire]

Thanks so much Ram!

[@Rammohan0000]

@@HeatherBoydWire it's my pleasure and by the way i am ram mohan 's daughter sakshi love you and may god complete your wishes..!!!😊😊😊😊😊😌😌😌😌😌😌😇😇😇😇😇😇😇😇

[@HeatherBoydWire]

Thanks for telling me Sakshi...I've written your name down so I don't forget!

[@valerieaz]

First of all, I really enjoy your videos and appreciate you sharing your creativity! I notice that you typically don’t work harden your designs, especially rings. Do you think it’s helpful to do so...why or why not? Thanks!

[@HeatherBoydWire]

Hi Valerie: Thanks so much for your nice comments. I'm not sure what you mean by harden the designs. Please clarify!

[@valerieaz]

Heather Boyd Wire Sorry for confusion. Typically work hardening is done with a mallet (rubber, metal or leather depending on the gauge wire used), hitting on the metal against a hard surface (mandrel or bench block) to help “harden” the wire so it holds its shape better.

[@HeatherBoydWire]

I don't do that, but I should look into it. Does it flatten the wire?

[@valerieaz]

Heather Boyd Wire Only if you’re use a metal hammer and more force. I often use the rubber/silicone side of my hammer and tap just a few times. It really does make a difference. Several videos available on KZbin. I think Off the Beaded Path may have a good one, but I’ll check and post here for you. 😊

[@valerieaz]

Here’s one of Kelley’s videos showing wire hardening at about 7.5 minutes in. Hope this is helpful...enjoy!

[@saskiakristofedes2482]

what kind of wire do you use ??

[@HeatherBoydWire]

I use Artistic Wire tarnish resistant copper in 18 or 20 gauge.

[@shivangisharma3555]

Nice work 😍😍😍 can you please do wire work step by step

[@HeatherBoydWire]

Thanks Shivangi. I'm not sure what you mean. Please explain!

[@sanjubiju3497]

Superbed ring i love it ❤️❤️❤️❤️❤️❤️❤️❤️🖤🖤🖤

[@HeatherBoydWire]

Just seeing this comment now. THANK YOU.

[@katielynnjohnson5594]

How much wire do we use?

[@HeatherBoydWire]

You can use about 5-6 inches for this ring. Depends on the size of the heart and the size of your finger.

[@NOUR-h3v]

From algeria 🇩🇿❤🇵🇸

[@HeatherBoydWire]

Hello!

[@NOUR-h3v]

@@HeatherBoydWire ❤

[@comcom9017]

🥰🥰

[@mintyzvr1170]

What is the best type of wire to use when you are selling the rings?

[@HeatherBoydWire]

You can use non tarnish copper or Argentium silver wire.

[@mintyzvr1170]

@@HeatherBoydWire Okay thank you very much Ms.Boyed

[@carlatrivini4779]

Scusami mi puoi fare vedere il tutorial di una bambina con il filo di ferro nn riesco a trovarla grazie

[@HeatherBoydWire]

Is this the one? kzbin.info/www/bejne/o3_WiGB6eLt1nrs

[@togaaxolotl5384]

I can't even tell you how many times I accidentally cut myself trying to do this and your barbed wire ring

[@HeatherBoydWire]

Oh no. Take care of yourself.

[@bethcoombes1054]

Can’t see you?

[@bethcoombes1054]

Rebooted...now I can see you! 👍🏻😃

[@HeatherBoydWire]

@@bethcoombes1054 Thanks for watching!

[@HeatherBoydWire]

PS: I've had that problem watching my own premieres before. LOL

[@johnnystephens7027]

morning

[@HeatherBoydWire]

Hello!

[@johnnystephens7027]

how are you today

[@niceeaba6052]

I really thought it's just easy to make, but now i have all the materials huhu it was really haaard:(

[@HeatherBoydWire]

Just takes practice. I'm sure you'll get it!

[@scarlettallen5456]

Can you make a ring that opens on the top , with a Cross on top please. Not a chris cross, but an actual cross that honors Jesus

[@HeatherBoydWire]

Thanks so much for your special request Scarlett. The video will premiere at 8pm EST tonight (Saturday) kzbin.info/www/bejne/n5zEdqCCZcSed6M

[@JoyBridgman]

You go too fast for a beginner unfortunately 😞

[@HeatherBoydWire]

You can slow down the playback speed in settings if you click the gear.