DIY: HOW I PUT WATER SLIDE DECALS ON RESIN DOMINOES USING CRICUT

This video will demonstrate how to make black glitter dominoes, how to print and cut water slides using your cricut, and how to apply water slides to your dominoes.
VIDEO EDIT: SPRAY YOUR SEALANT BEFORE CUTTING ON YOUR CRICUT.
SUPPLIES PURCHASED ON AMAZON:
EPOCH PAPER BRAND - WHITE WATERSLIDE DECAL
MOLD MADE WITH MOLD STAR 15 SILICON - I made the mold with MOLD STAR 15 SLOW SILICON purchased from Amazon and the lid is from the plastic container I used to make the mold.

[@pupawupagus]

thank you so much for your vid! i admire all artists, but i extra admire artists who post nuts and bolts only videos. (edit: now im just bitching, sorry 🙃)i found exactly what i needed on your video in seconds. you use “normal” art supplies and your workbench looks like an actual workbench and not a yt set wow, i don’t know what about wet decals turned my comment into a therapy session 🤭

[@clutteredgypsie]

Wow! You've just opened up a whole new world for me! Ahhh Thank you so much for your awesome demonstration! I love your style and I'm now an instant subscriber! ❤ Bless you!

[@ivycastlecrafts]

I’m so impressed that you made your own mold. They look great!

[@diyhookedoncustomcrafts6901]

1st Lady Antiks, thank you, thank you, so much for the awesome comments!😊

[@diannasantiago3506]

Yes!!! I would definitely buy one!

[@lisacapers2181]

Your dominoes are beautiful and the decals killin. I hope be like you and make beautiful dominoes. Thanks Lisa 😊

[@diyhookedoncustomcrafts6901]

Wow thank you! Just takes a little practice and patience. 😋

[@diannasantiago3506]

Making similar ones using this waterslide! Can't wait for it to finish curing.

[@diannasantiago3506]

Thanks for the idea!!

[@diyhookedoncustomcrafts6901]

TFW! Great these are great water slides to use I hope your project is a success!

[@lcrushfield]

Nice. Where do you get the printable liquor labels from?

[@sotoslays1890]

do you seal the decal with anything after it sets or does it stay because of the enamel? I'm looking to make these and have no experience but decals are a must for me so I want to make sure I do it right

[@TheTbgh]

I loooove this. How much resin did you use for this project? I always make too much or not enough 😕

[@deannaaubert1005]

So awesome. Thanks

[@diyhookedoncustomcrafts6901]

Hi Deanna and thank you!

[@bibimartinez6479]

how do you create the border around the image for the cricut to cut in squares?

[@clutteredgypsie]

When you "flatten" the image in design studio it creates the guides for the circuit to follow once printed. Hope that helps!

[@rosangelarodrigues6865]

São lindos ja comprei as formas pra fazer aqui

[@dianatoma2792]

I usually print at fedex because I don’t have a printer. What should I tell them to give me images like that? Should I tell them I need them cut to my dominoes size and use waterslide paper?

[@staciewash5335]

How did you print? I know you used a cricut but how did you get the image on the paper?

[@plfelay55]

I just ran across your channel. Love what I'm seeing. Can you post where you got your dominoes mold with lid from. Also which waterside brand are you using? Thanks for the video.

[@diyhookedoncustomcrafts6901]

Hi Phyllis, thank you very much for your kind comments! I made the mold with MOLD STAR 15 SLOW SILICON purchased from Amazon and the lid is from the plastic container I used to make the mold. The waterslide is EPOCH PAPER brand - white waterslide decal from Amazon as well. I hope this helps!

[@plfelay55]

@@diyhookedoncustomcrafts6901 thanks for the info. Continue being blessed.

[@diyhookedoncustomcrafts6901]

❤️

[@whatsyourwhycoaching6758]

This was amazing! How are you sealing your dominos?

[@valarierodgers7668]

Did you have to spray seal on the water slide paper before putting in water?

[@diyhookedoncustomcrafts6901]

Hi Valarie, yes a couple of coats will work. You should spray/seal after printing. Use light coats. 😊

[@rosangelarodrigues6865]

Oi aqui no Brasil qual valor devo vender .?em reais aqui

[@whatsnikicooking6086]

I looove these! 🖤

[@diyhookedoncustomcrafts6901]

Thank you soooo much! 🙂

[@thesimbul1]

Great dominoes! How did you use the Cricut. Details please.

[@diyhookedoncustomcrafts6901]

Hi Donna Thank you and TFW! I uploaded the an image of an outline of a domino in design space and sized it to 1.7 height and .07 width. Then I uploaded my image in design space and placed it over the domino outline and made sure it fits in the outline evenly and then attach and flatten. Then go to make it... and change the number in the upper left of the screen. Your image will populate the number of times you selected, then print on your printer using the matte photo setting, wait until it is dry and seal with 2-3 coats of sealant. Let me know if this helps!

[@ZipporahsCrushCosmetics]

So you just use a regular printer for these? I have an HP and really want to try this method 🥰

[@diyhookedoncustomcrafts6901]

Hi Shelly, TFW! I used a Cannon P100.

[@ZipporahsCrushCosmetics]

Yes I tried this method and it worked so well! Thank you for the tutorial

[@diyhookedoncustomcrafts6901]

Wonderful 😊!

[@valeriejohnson2754]

Hey Denise. Can you tell me how you got the template for the blank dominoe

[@diyhookedoncustomcrafts6901]

Hi, TFW. I googled regulation dominos outline and click on images. Hope this helps.

[@chucklymanone]

What materials do you need to make the stickers?

[@diyhookedoncustomcrafts6901]

Hi Chuck thanks for watching. I used Epoch Brand white water slide paper.

[@valarierodgers7668]

What was the height of the decal size

[@diyhookedoncustomcrafts6901]

Hi Valerie, thanks for watching. Height .07 and width 1.7 inches.

[@Wilma.Pisces]

Did u seal ur waterslide after applying and drying?

[@diyhookedoncustomcrafts6901]

Hi Vanessa, TFW! No, I sealed the waterslide with 3 coats before I applied them which gave the waterslide a nice thick coat. However it's optional and the waterslide can be sealed again once you place them on your domino. Thank you!

[@89mzshine]

@@diyhookedoncustomcrafts6901 If I just buy waterslide paper, put them on my dominoes, and then dome them, do I need to seal the decals before putting them on my dominoes?

[@karenpaul4594]

Nice job, but you don't seal your water slides on?

[@diyhookedoncustomcrafts6901]

Thank you! I could have but the water slide had a thick layer of sealant, so it didn't require a top coat. But to be on the safe side, I would seal the next time.

[@craftychinurse5240]

You here in San Antonio???

[@diyhookedoncustomcrafts6901]

Hello I am not in San Antonio at this time.

[@martinezmary63]

You didn’t seal the waterslide

[@diyhookedoncustomcrafts6901]

Hi Mariia, thanks for watching. I sealed them with 3 coats of RUST-OLEUM GLOSS CLEAR ENAMEL. It's in the video. Hope this helps.