Making LAYERED Dominoes with RESIN

[@ednacouture7823]

A quick tip from one artist to another...If you take to long to use that resin, use a coffee cup warmer on low to keep it from getting to thick to use...Get a hand cloth lay it on the coffee warmer, then place your cup of resin on it...It will keep your resin workable until you finish your project...Happy crafting.

[@tatyanaduncan6289]

THANK YOU SO MUCH FOR THIS TIP! Im still a beginner in resin and this has happened to me so many times that I got discouraged.

[@craftingcuties3249]

Thank you for the tip. Very useful.

[@starsunflower3606]

Thanks

[@angellaturner1677]

That is good to know going forward

[@everevolvingartist]

Thanks for the tip!

[@cricket7162]

I used a gold sharpie pen on the mold itself, before resin. The resin picks up every bit and they look great!

[@heather_bot]

ooh thank you nice tip!

[@everevolvingartist]

The blue came out beautifully

[@craftingcuties3249]

Great job love those colors together. Thanks for sharing

[@kwelz.Jam.312]

chicity reppin, thanks for sharing this tutorial.

[@BearWoodsSupplyCompany]

Thanks for watching!

[@rosara2574]

They look sooo pretty. Thansk!

[@mrsangelmarie82]

Beautiful!

[@kimjefferson3425]

Thank you for the detailed video! I'm curious if you sanded the back? Some video say the domino's will have sharp edges.

[@SummerPark79]

That really cool

[@balenciasgarden6068]

Would a powder pigment be better for opaque color than a liquid?

[@resinhandmadecrafting1815]

very beautiful

[@eileenpenland]

Very nice

[@kennethandabbycoonrod1882]

Newbie here! I used this technique & then sprayed the dominoes with polyurethane for a glossy finish after sanding….they smell so strong. Should I have not done that? What should I have done instead?

[@shekeva77]

OMGoodness!! I need directions with measurements etc.

[@ericgriffin2892]

Is that the combination of resin & hardner you used to secure the rhinestones?

[@RosieCeeV]

Where do you get the pen?

[@MrDanshibai]

Hi, I just started doing my first set of dominoes. (beginner) I filled the mold to the top and next day I removed dominoes from mold.. looks nice but I noticed that in center of the dominoes, the resin looks sunken. maybe wasn’t really full to borderline as I did? Does this suppose to happen?

[@BearWoodsSupplyCompany]

Hey! Thanks so much for watching our video - we hope you learned a lot. We think your problem might be related to air bubbles in your resin. It sounds like after the resin had finally degassed, there wasn't quite enough resin in the mold to fill it all the way up. Mixing slowly and lightly spraying 91-99% isopropyl alcohol over your finished piece will help reduce air and avoid this issue, leaving you with a complete domino. We hope this helps!

[@Patricia-zr9vx]

Just beautiful 😍 if I may ask where I live it's not ventilated is there an epoxy I can use in house?🤷‍♀️🤷‍♀️🤷‍♀️

[@ericablankenship5763]

Look for non toxic and safe for indoor use. Amazon has some reasonably priced

[@ZippedUpKitz]

Use Let's Resin … their resin is wonderful.. no odors at all and I don’t get headaches like I do with other resins…

[@kathleenmckenzie5766]

Is a heat gone a hair dryer too?

[@debbrantner6666]

What size are the dominoes? How thick? Mine are very thin.

[@franklinpearl9277]

Do you need hardener too?

[@graffist1]

I use same molds and the never cure flat. When I sand they never become shiny again. I've seen people seal them with clear spray but every time ive ever done it like that they stick after, no matter how long I let dry. The way everyone does them doesn't work for me. Ice worked with resin for a wile. I don't get it.

[@brebee5233]

If you end up sanding something ever you'll end up wanting to buff it afterwards with flitz polish and a polish cloth or you can always get a cordless orbital sander with buffing pads (this Is a way I found to polish my stuff I'm just helping) or you can try and find a clear spray(I usually just polish so don't know much about spray)

[@graffist1]

The dominos don't demold flat. I use the same mold and have tried many diffrent resins. And sanding makes it so hard to bring back to a nice perfect flat surface

[@user-ji7qn7zl8g]

How long to you wait between colors?

[@jenniferjasso5947]

I wait until the first layer is completely cured. The heat the top layer gives off while curing can mess up the bottom layer if the bottom layer is not completely cured.

[@dustinbrooks5755]

How did u put the dots &.lines in it didn't show in video?

[@ZippedUpKitz]

They are built into the mold…

[@charlseacapehart7018]

Still new at making dominoes. What was the resin you used? Does the dominoes come out really lightweight? Messed up on my first try

[@m.cassilly89]

Is this for a double six set?

[@tamiwain2674]

Did you seal the metallic pen?

[@sarahtruell7219]

I have this question as well!

[@elizabethgraham9815]

Me too! Lol

[@trayjones84]

Nice video how much do you charge for these thanks

[@BearWoodsSupplyCompany]

Any finished products that Tiften Studio may sell can be found on her website. The link is available in the Description if you would like to check availability! Thanks for watching.

[@лилупикки]

Where did you buy this metallic pen?

[@BearWoodsSupplyCompany]

Hello! We hope that you enjoyed the content and thank you for your question. In terms of Metallic Paint Pens, the best place to source these is typically a local Craft Supply Store. Some examples being Michaels, JoAnnes, or Blick but it's best to check in your area. Hopefully this helped.

[@resinhandmadecrafting1815]

canwe use hair normal heat gun ?

[@katelyncollins9330]

Tip: If you dont wear gloves you can wipe the paint off with your finger as soon as it happens before the paint dries.

[@dennishight4419]

Have you ever made a domino stand?

[@gatorlife1498]

How do you make the ones that is soft coming out the mold hard please

[@HoneyMiel30]

You can’t. That means that your ratio was off when you mixed or you didn’t mix well enough.

[@vannessasmith560]

I made my 1st set and two of them look cracked is there a way to fix this and will they break

[@BearWoodsSupplyCompany]

Hi there, It sounds like there might have been some inconsistencies during the curing process. We always recommend having the area you're doing resin in be held at a consistent temperature during the curing process. The cracking could be indicative of the resin flash curing and pulling away, causing cracks. Mixing your resin thoroughly to ensure there are no unmixed parts will also help avoid these types of issues.

[@MrDanshibai]

Can you add spinner divot on these dominoes?

[@BearWoodsSupplyCompany]

The beauty of resin is having the ability to put whatever you want in the mold. If that's something you'd like to do we suggest doing a thin layer as your first pour, being sure to add your spinner when the resin has set up a fair bit to hold it into place. You'd then finish your dominoes as normal. We haven't don't this project ourselves so would appreciate hearing if you find a better way! If you'd prefer to add them after the pouring process then we're sure you could drill a small hole to place a glued spinner in each domino. Happy Pouring.

[@michelesosa5538]

Do you sell the domino molds

[@SummerPark79]

Can you teach me how to like set up design with domines

[@dennishight4419]

Where can I get a box for the dominoes?

[@mcknight7811]

I think there are resin molds for those too or maybe you could search for pencil cases that could fit the dominoes?

[@tc5833]

Hi how did you smooth your edges after de-molding?

[@BearWoodsSupplyCompany]

Thanks for watching our video! In order to remove the roughness of the edges after the de-molding process, Tiffani uses a combination of the Marathon Rotary Tool with some sanding bits as well as some high-grit sanding paper. We sell Marathon Rotary Tools at Bear Woods, here's a link below if you're interested. www.bearwood.com/rotary

[@sarahtruell7219]

If you need to sand at all, how do you bring back the shiny finish?

[@shaunimcgarva329]

@@sarahtruell7219 you would coat the back with either clear resin or coloured resin depending on what effect you go for

[@nicolemazzola1330]

​@Sarah Truell you can use a deburring tool it does not remove the luster and easier than sanding

[@claudineriduet1390]

💖💖💖💖💖💖💖💖

[@resinhandmadecrafting1815]

isnt the rule that the much u put color the work will be weaker ??

[@coolgirlrules702]

Depends on what kind of dye you use. Water and oil based food coloring dyes won't allow the resin to cure correctly and should not be used. Powered dyes usually work fine though.

[@resinhandmadecrafting1815]

@@coolgirlrules702 ty ty ty for ur info , and what about my work some times stay sticky ?? even if i calculate correct and mixed it very well .

[@sandyeubanks4972]

Dominoes

[@SummerPark79]

Yoo

[@ImposingGestures]

niiiiiiice I love it. New subscriber I Just made a few sets I am gonna try your technique Cant wait to give you a shout out on my channel.