Рет қаралды 120,038
**INGREDIENTS**
Note: most items can be found at a hardware or craft store.
Interior sealant: amzn.to/3mSTuLL (CORRECTION: IN THE VIDEO I RECOMMEND MINWAX, however upon further research it turns out RUTLANDS is the safest sealant!!!)
Exterior sealant: amzn.to/3dTvt2X (find at a hardware store)
Mold: amzn.to/3dQW2pf
Acrylic Paint: amzn.to/39ZmTOP (any water based non-toxic acrylic paint is fine)
Powder tempera: amzn.to/3fX1euH
Grey matter: concreteconcre...
Best Base pigments for vibrant colors: concreteconcre...
Cement all: amzn.to/3d0DQud (Find it at Home Depot or Lowe’s)
Plaster of Paris: amzn.to/39Yoa8K (Find it at Home Depot or Lowe’s)
Imitation gold: amzn.to/3fZeKxU
**Q & A**
Q: WHATS THE DIFFERENCE BETWEEN CONCRETE AND CEMENT?
A: Cement is a byproduct of concrete. Concrete is cheaper but requires extra work. You will need to remove the rocks from the concrete before using. Cement is ready to go, but more expensive. Cement also dries faster than concrete.
Q: CAN I USE MICA?
A: Yes! However it will not give you vibrant colors.
Q: HOW CAN I GET MY VESSEL SUPER WHITE?
A: Using a specialized pottery base is the best way to get a white vessel, however it is costly. It is cheaper to use the white powder from concreteconcrete.com - If you are interested in the specialized white plaster base, you can find it here: amzn.to/31Yk8Ji
Q: Is concrete better than cement? What about grey matter?
A: Grey matter is easier to use and has less of a chance of getting air pockets or bubbles, and it’s much stronger than concrete or cement (1000x!) but it is more expensive. I personally prefer cement over concrete. If cost isn’t an issue, I would use grey matter.
Q: HOW MUCH DOES YOUR VESSEL WEIGH?
A: 3 lbs for just the vessel, not including wax, oil or wick.
Q: WHAT ARE THE BEST TYPE OF MOLDS?
A: Thick ones! It’s important to pick a mold with thicker walls. If you are using thin resin molds, you may run into the issue of your vessel over heating once the candle is burning. The thicker the candle vessel wall, the better! Try to find molds that have a case around them as well, so the mold retains its shape better. Resin molds are difficult to demold, so I prefer molds with a softer silicone.
INSTRUCTIONS
Add 1 tablespoon of plaster of Paris to 1 solo cup filled at 75% capacity with cement or concrete. Add color if desired. Add water gradually and slowly and stir mixture until it reaches a pancake batter consistency. Pour into mold and follow up with swirling water based acrylic paint if desired. Demold in 1-4 hours of using cement all + plaster of Paris. Sand bottom of vessel to remove any rough edges. Seal interior with water based polycrylic sealant (two coats). If desired, seal outside of vessel with a sealer. Let rest for 24 hours before pouring a candle inside the vessel.
=======DISCOUNT CODE=======
Use the code “HAWTHORNCO10” to take 10% off your purchase at woodenwick.com
=======LINKS=======
- My Amazon Store:
amazon.com/sho...
- Instagram:
/ hawthorncompany
- Website:
hawthorncompan...
- Facebook:
/ hawthorncompany
HOW TO MAKE CANDLES
🌱 • {DIY} HOW TO MAKE LUXU...
- Luxury Waxes:
woodenwick.com...
sixteensevente...
- Luxury Fragrances:
woodenwick.com
stonecandles.com
- Luxury Vessels:
woodenwick.com
sixteensevente...
dreamvessels.com
- Wooden Wick Sample Kit:
woodenwick.com...
- Wooden Wick Selection Guide:
woodenwick.com...
- Wooden Wick “How-to” Guide (FREE):
drive.google.c...
- Wooden Wick Community:
/ 262745064615702
- DIY Beginner Candle Makers:
/ diycandlemaking
- Coconut Wax Community:
/ 776429256105428
- Fragrances Community:
/ 247389023156198
- Candle Maker Forum:
www.diycandlem...