DIY how to take out stereo Corolla Verso - 2004 Toyota Corolla Verso - Bildilla Magasin

[@bildillamagasin]

It's nice to see that this video has been helpful to many! I have posted MANY how to videos after this one. Very many about my Land Cruiser 120, and now I'm on a 2000 Toyota Celica. Then more about 1998 Celica .... And many other projects are heading into the garage !!!

[@robert6642]

It really was helpful for me, please could you tell me how to start the Verso? I mean with the electronic key, step by step? Should I press the clutch?, Wait for something?,please help me,it's the first time I have a car with this kind of system of start push. Thanks for your videos! Good luck!!!

[@bildillamagasin]

@@robert6642 Hello. Most modern cars with the start button have almost the same start routines. Manual gear: Press in churts + brake, then press start when pedals are in. Automatic gear: press brake, then press start while brake is pressed. I don't have the Verso anymore. But it was manual gear. Meaning it would also start when you put the gear in neutral and pressed the brake! I photograph used cars and have to start a lot of different cars. then I go for the recipe above!

[@robert6642]

@@bildillamagasin thabk you!

[@pickles6993]

Brilliantly shot video, have you replaced it with a touchscreen unit, and did you video that.? I'm totally struggling to find which size unit will fit etc.

[@tibitek]

Thanks, this has worked! (I soldered all the power transistors from the top side of the PCB too.) You have saved me hours of "debugging".

[@bildillamagasin]

It's great that the videos are useful to as many people as possible! good to be able to help! Greetings Pål

[@2beauty24]

Where the rest lol so pleased you made this video I'm going to change mine. Would love a video with putting on a new one 😄

[@bildillamagasin]

Good evening I do not have this car anymore unfortunately. But if you are going in with a new 2 DIN player, then you probably need a frame that fits the round player. It should be possible to find on e-Bay etc. A non-Toyota player will probably require a transition wire from the ISO connector to Toyota connectors. But there are guaranteed to be videos on how to mount a new 2 DIN stereo in Versoen, on KZbin! Regards Pål

[@2beauty24]

@@bildillamagasin hi good evening thanks so much for your reply. I watched your video and thought I can definitely do this but have to do a bit more research to ensure I do it correctly 😅 definitely don't want to mess it up. Thinking to get a 1 din player and possibly and little storage as I didn't think a 2 din player would fit I was told it could be 1 and a half 🤔 Thank you for your reply I appreciate and I will certainly ensure I get the cable if i need it as you stated and even a case if that is needed also. Sounds a little more complicated now haha. Thank you

[@bildillamagasin]

today 17 / 7-2020, follow no. 300. We hope that more and more of you, start following the channel! 😀

[@bildillamagasin]

20/10: 408 followers!

[@bildillamagasin]

Det er fint å se at denne videoen har vært til hjelp for mange! Jeg har lagt ut MANGE how to videoer etter denne. Veldig mange om min Land Cruiser 120, og nå holder jeg på med en 2000 Toyota Celica. Så kommer mer om 1998 Celica.... Og mange andre prosjekter er på tur inn i garasjen!!!

[@kemy5368]

Thanks for the video, it helped me install my BlueMusic bluetooth module on my Toyota Radio. 😎

[@bildillamagasin]

Thank you! It was nice that the video is useful!

[@duselwusel4569]

does this work? how did you do it? which one did you buy and connect? how is it working now?

[@kemy5368]

@@duselwusel4569 yes it still works fine after almost 4 years, I bought it on amazon, it's called a " BlueMusic Bluetooth 6+6 Compatible with Toyota Auris Avensis Corolla Hilux Prius RAV4 2006-2013 Yaris XP9 Land Cruiser J12/20 - - Lexus is (is-F à 2015) GS RX LS " and it connects on the CD charger ports of the car radio. tricking the radio by making it think it's playing a CD but the audio comes from your phone or tablet. I can also you the next or previous track control from the steering wheel or directly on the radio too.

[@IamMarseille]

Thank you for your video which helped me a lot 👍

[@bildillamagasin]

Good day! It was good to hear that the video has been able to help one more person! The goal was precisely to be able to give back to more people, as I myself have received so much help from other people's videos here on KZbin! Thank you very much for the feedback, it helps with the motivation to make even more videos in the future too! Greeting Pål (Paul)

[@pickles6993]

Finally, I found someone who has the same head unit as me, now all I need is a vid on how to replace it with a MODERN unit. ie touchscreen/GPS/Bluetooth etc. Anybody help coz I know the TRUTH IS OUT THERE.

[@unomas999999]

Buy a new 2 din radio panel. And instal the new audio you want. And place it 👌

[@bildillamagasin]

There are many 2 DIN frames, which will be able to work. And there have been a lot of nice stereos, but navigation, WIFI, 4g etc. In Norway, we need digital radio, so we have a little less selection compared to the DAB + radio here.

[@unomas999999]

Just look for your car.. Try it man.. Of Norway wasn't that far i would help you 😅

[@bildillamagasin]

@@unomas999999 I fixed my stereo. This is a mistake that is clearly very common on just these stereos. I also made a video, the disassembly + fix of the stereo is described. kzbin.info/www/bejne/hGeke4pjnJlgpa8

[@duncandarnell1169]

Why so many plugs in the back will a regular double din steered fit this

[@bildillamagasin]

Hello. Yes there are many plug options on that stereo. Do you think you have to have a transition cable from Toyota's standard to ISO on this car as well. In addition, there are probably extra connectors for cars equipped with NAV. Regards Pål

[@Dor-cm7ku]

Easy way to to change oil filter? Without the necessary tools lol 😆 I know how to change the oil just is there any handy way of taking the filter off?

[@bildillamagasin]

Hello. I sold this car a while ago, and do not remember exactly what it was like to get to the filter. You may find that they are very hard, and can be difficult to get to without tools! Sometimes you end up knocking holes in the side of the filter with a large screwdriver, and then getting the attachment to unscrew it. But then you quickly have a problem, if it does not help. Then you stand there with a filter with holes, and can not drive the car until it is fixed. I have personally struggled with many filters, and ended up with several different types of tools for disassembling filters. Greeting Pål

[@bildillamagasin]

Hva ønsker dere av forbedringer på neste how to video, i forhold til denne?

[@josipivanovic3330]

I tried to remove plastic panel from the right of the radio and it is super resistant, should I use my whole force bevause i am scared to break it

[@bildillamagasin]

Do not use full force. Can be forced to get a new panel if it breaks. I had to try to use the orange plastic tool, in several places.

[@josipivanovic3330]

@@bildillamagasin I just used screwdriver and pushed it from the top and it came out. My problem was that the air vent got stuck inside that

[@bildillamagasin]

@@josipivanovic3330 Try to avoid using a screwdriver, as it can leave ugly marks (some people use tape on the screwdrivers). There are many types of plastic tools (similar or equivalent to what I have). They are cheap, and nice to have for many different tasks with dismantling the interior of cars.

[@bildillamagasin]

@@josipivanovic3330 The top of the panels, sits with 2 clips. And must be pulled straight towards the seats. May be more difficult. The bottom of the panel, just sits in 1 clips, and can be easier to get it loose.

[@josipivanovic3330]

@@bildillamagasin it was easier on my car to pull the top one

[@bildillamagasin]

The plan is to continue building the KZbin channel, with 2 new videos coming week! In order to run this the way I want, it is important that people give feedback on what they want more on the channel. And what should have been done better !!!! It is also important to get in touch with several car owners, who would like to know something about their car / project, on the channel. Preferably in central Norway in the first place. And it is very important to include more followers / subscribers! kzbin.info Greetings Pål

[@Dor-cm7ku]

Thanks

[@bildillamagasin]

Thanks for the feedback! Greeting Pål

[@lermaxfoto]

Ble en meget bra video dette da!!! Og snart 4000 visninger. Kanskje ennå flere fremover :)

[@bildillamagasin]

Denne har gjevnt besøk nå ja :)

[@LaurenceFletcher]

I took this out and am trying to fit a normal radio. I bought kit to convert to single DIN - anyone know how to wire it in as none of the connectors match a standard single DIN radio. Help!

[@bildillamagasin]

Hello. Toyota does not have a normal connector, so you need to buy a transition cable from Toyota connector to standard stereo-DIN connector. Greeting Pål

[@bildillamagasin]

Planen er å fortsette å bygge opp KZbin kanalen, med 2 nye videoer vær uke fremover! For å kunne drive dette slik man ønsker, så er det jo viktig at folk gir tilbakemeldinger på hva de ønsker seg mer av på kanalen. Og hva som skulle vært gjort bedre!!!! Det er også viktig å komme i kontakt med flere bil eiere, som kunne tenkt seg å fått med noe om sin bil / sitt prosjekt, på kanalen. Da helst i Midt-Norge i første omgang. Og det er veldig viktig å få med flere som følgere / subscribers! kzbin.info Hilsen Pål

[@JackGittes]

Thanks!

[@bildillamagasin]

Thank you for your feedback! Good that the video helps people! For those who have problems with the stereo stopping and starting, there is a video with fixes for this as well. Regards Pål

[@allansjoberg4364]

Toppen!!

[@bildillamagasin]

Godt at du likte videoen! :)

[@marianomontoya4355]

Nunca entendí por qué en esto videos nadie pone un buen tema de los Rolling , los beatles o ac DC.

[@bildillamagasin]

There could certainly have been a lot of nice music that would have suited that stereo, but copyright puts an end to most of it, in the video.