DIY Lakhovsky MWO (Milti Wave Oscollator) device, detailed informations, facts, analysis

[@steve3964]

Super si objasnuvas, brate. Sekoja ti cest. Poveke vakvi videa treba da naucime se sto mozeme za George Lahkovsky. Pozdrav od Avstralija

[@ajaybrahmbhatt2663]

Dear MP, Big Thanks for your Video as well as Website Presentation of Original MWO .... A Wonderful Machine that help restore health at very low cost & least possible health risks. GOD Bless, Guide, Help and Protect ALL the Humans like you FOREVER !! Keep up your great job of helping Humanity & you shall ALWAYS be Blessed by Almighty GOD !!

[@mavisgaming3270]

u should patent and make a commercial version to be sold world wide we need these inventions back truth or not we need this in every home in ever childs hands

[@seangust9025]

Absolutely, I’m trying to do it myself but I’m not sure on how the plasma needs to be attached to the antenna

[@willabestorms6059]

@@seangust9025 please explain more….

[@seangust9025]

@@willabestorms6059 it’s a long explanation and I still don’t have any of the materials I need, so you’d be better off doing your own research

[@fredfloppel7378]

Thank you for sharing. One thing I'd mention, is it would be very helpful if you included a more detailed idea of how to build the antenna, and what materials would be best to use. I think many would appreciate that!

[@jonathanbreen9716]

Ive really enjoyed all your videos. I like the simplistic approaches you use to make availability of certain devices accessible to more people and Ive played off your work a bit. If theres a way we could get in touch, Id like to discuss with you an expanded use case for the Lakhovsky antenna that Ive come up with by utilizing a cheap FG-100 function generator with a BNC to 3.5mm audio dongle to adjust the carrier frequency of a Tesla coil with an audio input and attached a Lakhovsky antenna. I believe that might aid in your harmonics testing of the device.

[@ithiellaviera8476]

I would like to talk to you about this

[@walkwithhim5258]

I want to understand this technology some more. Are there any book recommendations that will give me a jump on this device

[@mimimaria1908]

I love your content, amazing, thank you !💐

[@chbonnici]

If you want to get to the giga hertz range, you definitely need to use a spark gap. That is the only way you get the huge slew rate of the current, an electronic device like an FET or Transistor will not be able to do that. Also, your antenna needs to have the addition parts at the back to act like capacitors as Dillard did. This will replace the brass balls on the old antennas. There is a lot more. But this is some food for taught. Hope it is of some help.

[@tarekalsaleh3681]

Hi, it seems like you know what you’re talking about. Do you have recommendations on where to get a device? My son lennon (7) has TBI and we want to try a treatment;(

[@GodDieux]

@@tarekalsaleh3681 there is a guy here in Argentina that makes them… and there is a company in the Netherlands that makes them for about 10 grand, and another guy In Mexico that makes them for about eight grand. Probably a lot cheaper ways to get them though, but those are proper reproductions of the original

[@zotarrotar6724]

Where can I find the instructions to make the Lahkovsky antenna

[@AdiBacea]

where I can buy one of them? My father has a tumor and would like to use theses kind of devices for it.

[@AdiBacea]

for those interested I found a rife machine that opreates similary, which its said is one of the most powerful, from Spooky.

[@EmmanuelGreen]

​@@AdiBaceaThank you. This looks promising.

[@dodiegregg5620]

Here to buy it?

[@dodiegregg5620]

Where

[@elgutitozamora]

Exelente trabajo, mi pregunta, se podria sustituir la bobina de tesla por algun otro dispositivo que cumpla la misma funcion?

[@idoenergia]

How sensitive your SDR radio in minus dBm range? Maybe has higher frequencies with low power.

[@mesocodecanada8974]

Great channel and great project. But I saw a company in Croatia named RT17 selling a replica of the original MWO, it is showing the ring antenna hanging to Tesla coil on two points of the biggest ring ?? why is that ? while I see you connect one point only connected to the ring.

[@isa4153]

Gracias por sus aportes .soy nueva en esto . Mi consulta es si usted comparte como reproducir sus aparatos . Me interesa para poder hacerme los tratamientos .gracias

[@szekerespista3758]

The primary coil must have to be litz wire in order to not overheat from the Eddy currents? Please explain for me. Thanks

[@chbonnici]

or use a capillary copper tube due to skin effect.

[@szekerespista3758]

@@chbonnici thanks!

[@maymei6742]

Dear Sir.. I would like to inquire if the antenna / circle antenna have any specific measurement on the circumference thank you

[@chbonnici]

What you done here is really great. I have 2 questions if you would be so kind to answer. Is it correct the resistor value is 12K. And the most important is thing how did you design the 12 aluminium rings. I thank you for your time and patients. God Bless you. people like you make a difference.

[@MirkoPavleskiMK]

Resistor value is 12K. The pieces of aluminum are carefully cut from aluminum sheet as shown in the picture and glued to the PVC board

[@paradiselost9946]

design the rings? what do you mean, DESIGN? you just randomly stick random round bits of conductor on a disc. its cool. the dimensions dont matter. its science! you just do what looks good! lets ignore how every element is an inductor and every space a capacitor, forming LC circuits... thats irrelevant! theory, not important! thats for professors and nerds, not us genius who know what the REAL DEAL is! just slap any number of round metal things on a disc as you want, and hey presto, just like magic, all your ills will fade, your sicknesses heal, your dogs come back, your car accidents repair themselves, even the white house will abolish tax and make all housing free, for everyone! weee! feel the HEALING POWER OF pSUEDOSCIENCE!!!!!!

[@chbonnici]

how to calculate the inner and other diameter of each ring in mm

[@dimdom964]

No need to calculation. It's wide range antena. The biggest round diameter about 30 cm.

[@googleedwardbernays6455]

@paradiselost. Your message makes you appear triggered af. You mock and trivialize anyone interested in this alternative tech with assumptions on how those people think Not a single person in these entire comments claimed they would use this machine prior to going through the “proper” channels of western $©️ien¢e. Yet you are making these insane generalizations, at the same time defending the status quo medical community, as if the scientific research and theory YOU agree with is somehow above reproach to any scrutiny . And all because textbooks at some gilded institution preached western medical ideas are authoritative and every thing else should be smugly dismissed publicly, brashly and often. Had you not been so eager to flash your “sassiness” , because thats all you have really accomplished here, you would have heard the uploader say at the beginning of this video , that LahKovsky’s machine has beem “de-boonked” by mainstream science!!! What else is it you desire that will lower your blood pressure, a ministry of truth , for Christ sake?

[@cherriethomas9538]

I am making one to put in my garden as everyone's doing the copper wire but this is so much stronger.

[@fredfloppel7378]

Unfortunately, I can tell you with absolute certainty, that the "electroculture" stuff, putting copper antennas in the garden, does absolutely NOTHING to improve plant growth. I did a very comprehensive, closely controlled study on the subject. I took 12 plants, clipped ALL from the same mother plant, and grew roots, put them in 12 seperate containers. Each had the exact same soil, same explosure to light, same light schedule, same containers, same water at same times...everything was done with the utmost precision and care. I put "electroculture" antennas in the soil of 6 of them, and left the soil of the other 6 without antennas. The 6 with antennas showed NO noticeable difference from those without. In fact, one of the plants without an antenna outperformed, and produced more than ANY of the plants with an antenna. It does NOTHING useful! Don't waste your time. Others have done similar experiments here on youtube, had the same outcomes, and put the results on video here on youtube. Also, introducing a direct electrical current to the soil does NOT do anything positive for a plants growth! In fact, introduction of a direct electrical current will SLOW and STUNT plant growth, ultimately eventually killing the plant. Now, if you'd like to know how to TRULY obtain extremely vigorous growth, and amazing results, ditch the electric stuff altogether. Instead, do some homework on compost, and creating a watering blend of nutrients from a mix of compost. The best results will be from: using compost of the SAME plants you're growing. Lets say squash. Take the remains of the squash plants you grew the previous year...vines, leaves, and unwanted squash. Toss all in a big container with a lid, a plastic garbage barrel works great. Fill as much of the barrel as possible with plant matter from the previous year, then fill the remaining space with water. Add some leaf mold from the plants you want to grow, and a few handfuls from the bottom of your compost pile, the blackest, healthiest stuff. Cover, and let it sit, ferment over the winter til spring the following year. It's okay if it freezes and thaws multiple times. Then, take the fermented mixture, and dilute it with water. Use this to feed your garden, and watch as it grows out of control! The point is, the plants we grow have EVERYTHING they need to thrive contained within themselves. This is why annual crops only get better year after year, as the ground is fertilized with the remains from previous years. Same idea, but used intentionally in a concentrated form. Also, multiple different plants can be combined in the same container, to create a more universal-to-your-garden mixture. Forget the electric stuff, its misleading and a nothing burger. Doesn't work! I hope this helps save you some frustration, and points you in an actually effective direction! In other words, I hope this is helpful!

[@zotarrotar6724]

How can I get the instructions to make the lakhovsky antenna

[@teknik13]

I think using a mosfet will change the overall functionality of the circuit. Can you please share the original schema?

[@mustermann9766]

Mirko, wie kann man dich finden un in Kontakt tretten?

[@topfuelsuzi]

Mirko thanks for sharing. What analyzing software are you using to monitor the device?

[@topfuelsuzi]

Disregard my question. Found the answer in another of your videos: Riden Power Supply Software☝😎

[@Taran-d.B.23]

Verry nice:) Question: There sre some people who hook up a Rife Plasma Ball (Pantograph) at the 2nd Ring from outside (normally you have 2 Lakhovsky antennas) . There are two types of Original repuilds, one with Classic transmitter and Receiver coil and one with a bipolar coil. Both Systems with two antennas of course. Your Design is more special and not like the Original i would say :) i know that they do it with the rife ball and the bipolar coil mwo. When this make sense, does it also make sense at a transmitter and reciever coil version?

[@itzuan]

I had read the Frequencies for the cáncer cure are below to 500Khz . Actually there are múltiple values for several types of cáncer. For example for blood cáncer 192.7 KHz lungs cáncer 320.5 KHz and so on.

[@user-directx]

Can it be viewed with an ordinary oscilloscope? Is it easily damaged?

[@boytoytimmy9081]

I'm sorry to say but the rings you have setup are opposite of the original design. Where you have metal set up should be empty space and where you see the white board is where the copper wire should be. One continuous wire forming the rings. I'm sure people will argue my point but it wouldn't hurt to try it that way, I'm certain it will work with the proper setup...

[@ossi.p]

Until now I had only heard a lot of chatter about the data from the MWO. At last, someone is making a comprehensible measurement and revealing that the promises are not quite true.

[@GodDieux]

Yes, although somebody else in the comments mentions that without a spark app that is to be expected

[@doctoreden]

The original or other circuits do not use typical tesla coil set up. Maybe that is why you are getting those readings. The set up is similar to the tesla hair pin circuit but not quite. The properties of tesla's hairpin circuit are completely different than those experienced with the typical tesla coil.

[@yupingliao4078]

Astonishing＋1👍

[@oldspammer]

Millivolts, pH meter probes can be different between manufacturers. Blood pH is different than cell energy--how can you not see this? Probes can use different reference solutions and so have different calibrations than other manufacturer designs.

[@samj1012]

great video. what is the balast ? and what ratings for that fast diode?

[@MirkoPavleskiMK]

The ballast is from an old 40 watt fluorescent lamp, and the diode is for example MBR40250

[@feyodnaim2294]

Hi Mirko ...i have build one with two antennas , i would to know your secondary coil parameter ... Please let me know..thank you

[@MirkoPavleskiMK]

900 windings on a body with a diameter of 5cm with lacquered copper wire with a diameter of 0.15 - 0.20 mm

[@thomasgerster8405]

According to other sources / devices, the best frequency for cell regeneration is 150 mHz.

[@cayapaty]

Hi I need to buy this where are you located ?

[@MirkoPavleskiMK]

Sorry, not for sale

[@oldspammer]

Georges Lakhovsky used a set of two different tesla coils and antennas, rather than just one coil and antenna. Both tesla coils were excited by the same circuit, but it is not clear to me if both were set to be in or out of phase with one another or if this capability could be used to flip the phases by an optional switch position. If both were in phase with one another, then the waves would produce an interference pattern with super position and wave cancellation. If out of phase with one another, then perhaps one of the output antennas could be placed at an inverted polarity (upside down) compared to the geometry of the first antenna. In this way, the waveforms would also have an interference pattern with possibly different results due to slightly different polarization geometries?

[@zoro-i8u]

What effect does the phase have on the benefit of the wave? If they are out of phase 180 deg with each other, does that generate a scalar field?

[@oldspammer]

@@zoro-i8u To measure what is happening might inform us to the answer to our questions about this. Is superposition or the opposite happening--I do not know, just that the inventor used two antennas.

[@1272-f9v]

The principle consisted in the transmission of multi-frequency oscillations directly to the cells via sympathetic resonance. If the voltage of dying cells at the end of the disease drops below -25 millivolts, this treatment method allows to restore normal cell working voltage. In fact, this method allows to increase the working voltage of the cells above the measured normal reading. Thereby achieving an increase in the average life of the cell.

[@oldspammer]

@@1272-f9v Someone originated these ideas that you have mentioned, but.... how did they measure all of that stuff within the cell to verify their theories? From where did you reference? From where did they reference? Who originated these "nice" sounding factoids? Was it all pulled out of someone's butt? Use some critical thinking, please.

[@1272-f9v]

@@oldspammer Go read some technical medical literature. Understand what pH is and how it is measured. Lack of knowledge is no reason to be abusive and rude in every possible situation.

[@arjenchristianhelder1027]

i wonder what difference it makes to have a mosfet instead of a spark gap, a spark gap is quite chaotic, many different discharges happen simultaneously so it should theoretically have a very different radiation characteristic, with higher frequencies, and wider band with much more overlap, its essentially an ocean of EMI white noise instead of fixed frequency bands caused by harmonics. weather this has a different effect is the question.

[@manithyachandravidyananda8236]

We do need this as cancer is prevalent . Can you make me one?

[@rueporter2253]

This is wonderful. Im newer to this tech. I am interested as I am not well. Stay free an healthy sir.

[@MirkoPavleskiMK]

Thanks

[@mrfox5587]

What if i use it on brain ​@@MirkoPavleskiMK

[@mrfox5587]

​@@MirkoPavleskiMKis that will make me smarter

[@debihsofiane3229]

How to protect electric body??

[@mboland69]

Just a note that a large amount of human biological frequencies are below 1kHz, so excluding that may have unpredictable results. Are you sure you cant oscillated down to 1Hz?

[@ghostnetnanny7343]

THX... 🙏🙏🙏

[@san4ndreas103]

Sir, my friend .. is dieing.... he is paralized from an unknown disease, he needs this ! ... So... Please, Please make me one of these, I believe it's the only way ! I am not a scientist, But i use this frequencys alot on myself, I know sound will work. I can pay what ever, just make me one of these please

[@noperope1.043]

I have a link where you could make one yourself, let me get it

[@noperope1.043]

It is the patent and otherwise on how to build it

[@noperope1.043]

transfer.sh/nFoTBQthdo/spooky2_frequency.pdf and this one is the frequency chart

[@smartbuddyonline]

Could you please help me too, I suffer from cancer 😢 🥺🙏🏻🙏🏻🙏🏻

[@CharlesWanye-lq9bq]

I need to ask a question

[@haideral-muhssen5688]

لكن الهوائي كان مصنوع من النحاس لا اعرف كيف ارسل لكم صوره جميع الصور عندي

[@bromokunto]

What software you are using?

[@MirkoPavleskiMK]

"Sdruno" for SdrPlay SDR radio

[@LevitationINFO]

Come to: mwo(point)name

[@TheSpinninHead]

Just amazing👍 Did u make this MWO plate yourself? Is it made of steel or aluminium?

[@MirkoPavleskiMK]

Aluminium

[@wannabeprettysoul]

@@MirkoPavleskiMKAluminium toxic...

[@alessandro123league]

I love it

[@oldspammer]

Your primary tesla coil winding is not using a bifilar winding, and as such would present more induction to your MOS FET driving circuit. A bifilar coil would also have a greater capacitance and would self-resonate with the small inductance. A self-resonating tank circuit would then need very little energy to power it IF the driver circuit was tuned to that resonant frequency. Often, designers using these things do use a spark gap circuit to induce ringing within the tank circuit and avoid having to tune any driver for a specific frequency that could drift anyway due to environmental conditions. But a spark is yet another point of failure because the tungsten electrodes, unless HUGE and quenched appropriately, would disintegrate due to ozone from plasma discharge of the spark. High frequencies usually travel at the conductor to insulator medium transition--the so-called skin effect. To reduce the skin effect, one could use even more surface area, however that you can do it, but this would effectively increase the power taken from your driver circuit unless even higher frequencies were used (due to lower impedance of the possible finely stranded enamel wiring used in order to do the increased surface area of the bifilar windings). I realize that Lakhovsky did not use bifilar coils. In order to have smaller sized coils, likely the windings should be either all inside the secondary or all outside the secondary so that the magnetic field phases should not cause any interference while driving the secondary, OR not, depending on if the result was better using a larger bifilar coil that spanned from the inside to some slight distance outside the diameter of the secondary winding. Who can know these things without some software simulation or actually building it to experiment?

[@انجلشاويمعاشرفالغرباوي]

Can i buy one?

[@MirkoPavleskiMK]

Sorry, no

[@DDDDanko]

PLEASE WHERE ARE YOU FROM? YOU HAVE A SLOVAK NAME, I'M FROM SLOVAKIA. EXCELLENT JOB, HATS OFF.

[@MirkoPavleskiMK]

Thanks, I am from Macedonia

[@chbonnici]

Up to Macedonia. Great work. Thank you for all the info Keek it up. God bless you

[@chbonnici]

Sorry meant to say Keep it up

[@MirkoPavleskiMK]

@@chbonnici Thanks :)

[@JoffreyCowan]

kzbin.info/www/bejne/qqm7maxretadftk Video of original operational MWO

[@oldspammer]

Dr. Thomas Cowan

[@DisasterPreparedness]

It's patented already

[@DrMatthewHudson]

There is a reason these are not commercially made and the scientist who designed them is relatively unknown. Because it doesn't work

[@MirkoPavleskiMK]

I completely agree with your opinion

[@chbonnici]

Unfortunately you are talking from your backside . You need to study Tesla to understand the power of high frequency and high voltage. It all about radiant energy. They work as I use them for the last 16 years and work wanders. Instead of criticizing this nice guy you should build and see.

[@itsadoggydogworld8974]

During Covid they showed “scientifically” that ivermectin did not work against Covid. The problem is the trial was designed not to work. This may surprise you but much of science is polluted by moneyed interests.

[@Gvozden73]

Did you try it? Real one, a good one, becose it is very hard to set this "maschine" right, in right freq.

[@googleedwardbernays6455]

Bruh, even if it is 100% placebo, why do this!? You offer no better solution or any data/ objective analysis to assist a person who might believe this is what they have been looking for!! And just like the other comment says , dood has used one for 16 years and it has helped them. You just appear smug and like a know-it-all. And i guarantee if this was real physical world conversation, you would be the guy in the back of the room with nothing to say. At the very least, troll better. or btfoh. Love someone who would never take medical advice from you.

[@IkalBlast]

I need this