DIY Manual Boost Controller | Ball & Spring

[@colorado_a3766]

Yo how are you a relatively small channel with one of the BEST diy’s I’ve watched, props man.

[@split150]

Just followed your video and made a great working boost controller for a buddy's 1989 turbo 5 speed Caravan. The thing is a blast. Thanks for the info.

[@daxbone2331]

I'm having Martin tune my S13 180 in the very near future and the only part missing is a boost controller. Ran across your video researching how to make my own but would love to have one made by someone with some prior experience. Thanks for the straight forward and easy to understand instructions.

[@Inner_Sanctum]

You made it just in time. Making the winning video now.

[@daxbone2331]

Inner Sanctum 🤞🏻

[@ttmn_Dom]

This is still gold in 2020, just came through on boosting my BRZ before the dyno, holds pressure flawlessly! I'm also in the SATX area. Running in between Lowes and Home Depot just for that ball bearing was annoying but worth it lol I'm now experimenting another one with maybe a slightly bigger ball bearing after hollowing out the center diameter to 5/16, I also thought about running it inline with a vented bleeder valve for an added ease of adjust-ability. Thanks for the vid!

[@FallenSyn23]

Fantastic video! I'll be making one this weekend!

[@Inner_Sanctum]

...but you could win this one! haha Honestly, it's a lot of fun making one for yourself. I find it relaxing.

[@boostaddict_]

I work at an industrial supply store so finding most of the materials will be easy for me, I've just been trying to find a good video like this to base my version on lol. I don't have to worry about leaning out my engine because I have a diesel, so this should be good.

[@robertboyd321]

Thanks mate, so good. I made one but I used cast Nylon instead of plastic for the screw.

[@THEFUTBALLER15]

Loving your channel man! Really digging the content! I’d use the boost controller to replace my older beat up home made controller for my S14 SR swapped S13 chassis

[@Inner_Sanctum]

I really appreciate it. Adding you to the hat.

[@koukikev809]

Love this channel! I’d use the boost controller to replace my turbo smart unit on my S14 SR20 swapped S13, and take it to drift events in the Houston area!

[@Inner_Sanctum]

Awesome man! I will put your name in the hat.

[@Inner_Sanctum]

Kevin Martinez, you are the winner! Congratulations! Let me know how to reach you so I can send you the manual boost controller. Cheers!

[@koukikev809]

Inner Sanctum awesome!!!!! Can you dm me on Instagram? @koukikev

[@8000watts]

That store is playing some JAMS! hahaha

[@Inner_Sanctum]

8000watts yeah it was!

[@lesleyrivera6585]

Great video very informative keep it going and yes it will be great for my daily D-LUX

[@Inner_Sanctum]

Thank you. You're officially added to the drawing.

[@Weights_be4_dates]

Bruther. I’m on my second 1/4 plastic fitting for the top and can’t get it to thread it. First one cross threaded

[@regis6544]

If im going to make it on my tdi vacuum actuator, i dont need relieve hole? Because tha vacuum from vacuum pump will suck excess air from controller?

[@adamrobledo3996]

Will this hold 25 lbs of boost?

[@240sxkrusty]

Wow thanks for this tutorial

[@micahhill4786]

Would this work with 3/16 fittings cause my internal wastegate has that size

[@rmt5820]

Hello from Sweden! Can I have your help and guide?

[@Inner_Sanctum]

Sure, what’s up?

[@thatdude5396]

"We're gonna stretch that too.. outerspace" hahahah

[@mack450z]

This is awesome! I've had bad luck with name brand manual boost controllers in the past 😓 this would be perfect on a turbo rat rod project

[@Inner_Sanctum]

Let's see if you can win it! Putting your name in the hat.

[@davenewton5895]

03 1.8T BT GTX3582R .70/.82 A/R Mafless 1000cc Siemens Deka injectors. EWG, HKS SSQV BOV. AEM 30-0300 AFR ,ME7.5 ECU .?need one of these on my long term build and it is done. Good video good info, I’ll be making one ASAP. Keep the boost content coming