DIY Mobile Workbench with Table Saw

[@nopt1118]

I never new you could build a solid workbench out of Ply, including legs! I always use 2x3 for legs. Thanks for the tip.

[@jeremyhack22]

The threaded inserts to fine tune the height of the saw is brilliant. Stealing that idea

[@HODYODesign]

Thanks! Happy to help 👍

[@alexisp2182]

I love it too! But one concern, How works this after some time of usage, you don’t have flexion on you MDF? A 5/32” (4mm for me, lol) metal plate under the MDF stand would eliminate this risk or is unnecessary? Thank you!

[@crossgrainwoodproductsltd9230]

I love how this workbench looks and I'm sure it is very solid. The dogholes on the side along with the t-track, great idea, but I especially like the magnetic bar next to the saw for accessories. That is something small but very clever and I don't think I have seen that on any other workbench build. This is my second time watching this video because it is very inspiring. Thank you for sharing!!

[@HODYODesign]

Thanks for your kind words, you made my day!

[@crossgrainwoodproductsltd9230]

Yup back for a third time! I wanted to build my bench 4 months ago, but lumber prices have not gone down yet. Your bench has at least $1000.00 worth of lumber into it at today's prices, LOL. But as I mentioned the last time, you are an inspiration to me, and I am about to build a large circular saw cross-cut jig with Pine boards I had leftover from a closet build I did recently. Thank you for being my inspiration!!.

[@jeffsienkiewicz7119]

Supremely over-engineered but able to withstand nuclear fallout. The amount of work and figuring out that went into this is amazing. Could have been easily done with toobafurs but the end result is something that will last longer than you do. Beautiful

[@HODYODesign]

Thanks! That's the downside of making stuff on the fly. It can take forever (like for this build), and it's usually not well thought. That's why I I don't glue anything, so that I can undo/redo easily during the process. I'm not proud of how I build this workbench, but I'm very proud of how it turned out. I really love working on this thing!

[@2sumu]

17:43 like those custom height adjustable 'casters.'

[@derekharp2805]

I can't believe how many layers this thing has!

[@jackpinnell3204]

I must say, that is about the nicest shop table saw work bench I've every seen! Great job! If you don't mind, I'm using a couple of your ideas for the table/workbench in my shop. Just purchased a 15 amp 10 inch table saw that I can use in my shop and take to a job site as well. Thanks again for a great video!!!

[@HODYODesign]

Thank you! I do have a few ideas in mind to make it even better. Stay tuned!

[@ElectricBlade]

The amount of screws you used is insane.... makes me think i got a long way to go. Hahaha i still keep running out of screws. This is a brilliant design and i learned some things from this video. I appreciate it. ^_^

[@HODYODesign]

Thanks! Lots of screws, yes, lots of scrap wood, and lots of work too!

[@johanturkenburg9470]

Great table. and yours is the first one I've seen where the grip for undoing the riving knife is easily reachable. Something I'll keep in mind when I start building my table.

[@HODYODesign]

Thanks! Glad you like it!

[@diywoodworking7490]

Well done! I made mobile liftable workbench with Dewalt DW745 and DW735 today.

[@erlanryspanbetov9970]

Оригинальное решение, возьму на вооружение. Однозначно лайк и подписка. Привет из КАЗАХСТАНА!

[@brianmi40]

I would have mounted the casters two to a 3' board that pivots at the center point of it. Sort of a suspension system for the whole thing, where each two casters self level between themselves to whatever the floor is doing. That way the center casters (lengthwise) are always at 50% of the load, and solidly on the floor.

[@dennisgu2506]

Ich bin Sprachlos, das ist ein Traum. Danke das du das mit uns geteilt hast

[@HODYODesign]

Danke vielmals. Gern geschehen!

[@julianarevill6166]

WoW, that's a hell of a workbench, it's a wonder you've got any wood left, lol, Very well done and made. Xx

[@HODYODesign]

Thank you very much!

[@dtwistrewind7361]

Beautiful bench, at the beginning I'm saying to myself that is so flimsy, and then layer and layer of armour was fitted, I really like the side mounted t track. Quality work

[@HODYODesign]

Thank you! I leveled it up until it was unbreakable, like in a RPG game :-)

[@hvacae6904]

Cutting of a 4×8 sheet will be very easy with that workbench such a great project

[@HODYODesign]

Thank you! It should be definitely much easier to cut a full sized sheet with this workbench, but full sheets don't fit in my car, so I still use the cutting services of my local big box stores to break them down to more manageable sizes!

[@hvacae6904]

@@HODYODesign thanks for sharing your idea ill try that design back home once i have a table saw...sometimes you will need to have a full sheet in the future at least your main equipment is ready on action

[@woodworksbygrampies1284]

Hola! 🖐This is the very first video of yours that I get to watch. This is a very impressive build but I wondered the same as many questioned in the comments below, "why the ply and OSB"? I completely understand by reading your responses. I'm a few short weeks away from building my very own (first edition) work bench and there are definitely some good tips here with your method of building. I think that the leveling feet you made is genius, I'll have to steal that from you, I mean borrow.😂 I'm moving over to watch your shop build video and see what I can learn from it. I currently have a completely emptied two car garage that will, over the course of time, become my workshop. Take care and have a good one, Adios! 👍

[@rsnook12]

i used OSB for my bench tops because of the same. It took a lot of finish to seal smooth and level the top.

[@HODYODesign]

I buy OSB 3 panels from Norbord exclusively here in Belgium. No added formaldehyde and already smooth finished!

[@amwartwork]

just built mine last week. frame made from 3 by2 inch timber. and used 4x4inch for legs. 8 legs in total. as its 4.2m long and 1.4m wide and 90cm height. 18mm ply for the surface. cost me 70 pounds in total. as ive got loads of scrap wood and loads of screws . im a labourer so....... ;) junk is gold. and my workbench proved this. ive even fitted a plunge router on the underside so i can do picture frame rebates or cut circles. ive seen a million n one videos on the saw workbench and some are really anal and far to particular. all that matters is the dimensions and the surface is flat. make sure u leave enougn room underneath to collect sawdust by hooking a good vac to the dust port.

[@garlicbad]

This is the toughest table saw workbench I'd ever seen. What a meticulous personality you have!

[@HODYODesign]

Thank you so much!🙂

[@jasonp9951]

Not sure where you live but here in the states right now that is about $1000 worth of plywood! Although it looks great, I would need to use less plywood. I am glad it worked out so well for you and will take a few ideas for when my time comes to build one! Cheers!

[@HODYODesign]

I live in Belgium and the 2 sheets of plywood I used in this project cost me 70€. More detailed costs here: hodyo.com/how-i-made-my-new-mobile-workbench-with-built-in-dewalt-table-saw/

[@tischlermeistertom]

what a timing! I want to build a workbench the next days so this fits perfect. Awesome work! :)

[@HODYODesign]

Thanks man!

[@tischlermeistertom]

@@HODYODesign are you thinking of uploading your your next steps of your house renovation? By far the best renovation videos I've seen :)

[@HODYODesign]

Yes, next year, once I'm done with the renovation. It's just too much work for me to remodel, shoot and edit videos all together. Stay tune!

[@tischlermeistertom]

@@HODYODesign awesome! Looking forward to it :)

[@safrica2]

저도 이렇게 만들어 보고 싶어집니다. 2020년의 최고 작업대입니다. 불가능 할것 같은 작업실 환경을 땀과 아이디어로 해결했군요. 배경 음악도 그렇고 노력하는 모습이 너무 멋져서 박수 보냅니다. 짝짝짝~!

[@HODYODesign]

친절한 말씀 감사합니다!

[@rocketboy10001]

What a beast! You must have a good budget for screws, I lost count

[@HODYODesign]

Ah Ah, yeah, I must admit I lost count too, and I had to refill after it was done!

[@Notarivs_Anonymvs]

Love the workbench! Thanks for sharing the video and pointing out the lessons learned. Very informative.

[@youtubechannel12371]

WOW that's an amazing workbench. Great work, thanks for sharing!

[@HODYODesign]

Thank you too!

[@smnhpkns]

Dude, that's a thing of beauty, given me a few idea's for my tablesaw

[@HODYODesign]

Thank you! I'm glad you like it!

[@johnkeedwell5549]

Question: why did you build out of (expensive) multi layered ply, then cover it over with osb? I am about to build a table saw base unit and several smaller units that will lock together when needed. I will be using 2x4 wood, glued togdther and laminated, then covering the outer with ply of some sort. Nevertheless, a great project with some great ideas others can follow. 2 weeks build. Wow.. Great work...

[@HODYODesign]

Ply was not as expensive as it is now back in 2020, and I would never build a workbench out of soft wood anyway, as my goal was to achieve a top as flat as possible. Pine is cheap (or used to be), but it wraps, expands and contracts way too much to do anything good overtime. OSB is just personal preference. It looks great in Europe but it is terrible in the US. Not sure why, but it is what it is...

[@michaelw2108]

Pretty good. Lots of details

[@twentysevenlitres]

All that nice faced plywood, then hidden by OSB!

[@HODYODesign]

De gustibus non est disputandum!

[@JoshHefnerX]

How's that OSB holding up?

[@HODYODesign]

Pretty well, thank you!

[@nelsondog100]

I was hoping to see some details on the new fence…

[@garycollins7688]

Nice bench 👍🏻👍🏻

[@geographyinaction7814]

Have you considered a coating of self-levelling concrete on the floor?

[@HODYODesign]

Not an option, many sewer hatches in the Garage. Way easier and cheaper to self level the workbench :-)

[@janusr3074]

Looks good and the router table on the right site you can build when you get the time :)

[@HODYODesign]

You read in my mind! Problem is that the router table will be in the way when I cut long boards. I will have to be creative!

[@janusr3074]

@@HODYODesign Look forward to see it

[@lynardburt5992]

I like your saw fence, did you make a video on that… showing how to attach it? Very nice bench, like saw levelers too.

[@HODYODesign]

I didn't make a video about the fence yet, but it's in my to-do list. Just been quite busy lately...

[@cathygriffee1724]

I can really appreciate the idea of leveling the table saw the way you have. Are you adjusting the height just by hand turning the carriage bolts? If so, have you found it stays at the correct height even after use?

[@HODYODesign]

Yes, I simply adjust them by hand, and it seems to be pretty stable.

[@joedance14]

Beautiful work, as always! Q: where does the above-table dust hose go? And the cyclone beneath the table - takes dust and chips from the rear dust port of the table saw?

[@HODYODesign]

TY! Actually the top hose goes into the cyclone and is connected to a shop vac that turns on as soon as I turn the table saw on. The rear port of the saw is connected to a 4" pipe that goes to the dust collector (started with a cheap $20 remote control). Great setup, although I don't use the top dust collection that much for now as it is often in the way when you cut materials. I plan to eventually build a floating blade guard to fix this inconvenience.

[@kenedshog]

I think I know what I want my bench to look like now. How is the stability with it being a plywood frame instead of 2x ?

[@kenedshog]

Can you give me an idea for a material list?

[@HODYODesign]

This workbench doesn't move at all and is super stable! One key component in this build is the level feet! They improve the stability by a lot on any uneven floor, and more importantly, they gives you a 99.99% flat top.

[@HODYODesign]

Go check out my website, there are more details over there, plus a list of the materials I used. hodyo.com/how-i-made-my-new-mobile-workbench-with-built-in-dewalt-table-saw/

[@ANDRESCUESTAS]

GREAT JOB DUDE:::: SIMPLE.....EASY....and SO PERFECT!!!!!! CONGRATS!!!! 1+SUBSCRIBER

[@HODYODesign]

Thanks!

[@patc7198]

great job i'm glade to see you work through all the little issues shit happens, seems to be the story of my life. thanks for the vid

[@HODYODesign]

TY! I spend more time fixing my mess than building stuff but in the end, it's really satisfying!

[@nopt1118]

What a thing of beauty!

[@gianlucatrozzi4252]

Many many compliments!!! Passion and pleasure for this big work !!! Congrats !

[@HODYODesign]

Thanks for your kind words!

[@vibrationNC]

Come and make me one? Louisville, KY!! All the beer you can drink?

[@HODYODesign]

:-)

[@rhinomite5203]

thats a really nice build, 10,000 screws later. And only 2 words for you : floor leveler...............lol enjoy

[@HODYODesign]

Thanks man! Screws costed me more than wood!😁😀

[@d1986ben]

Currently restoring two 1953 delta unisaw’s. While your work ethic and drive should be first complimented. I personally can’t see spending this much on material and time for a sub par saw. That being said some people would say the same about my project. I’ll be welding a mobile base to hold each saw. Good job and thank you for the project; no disrespect meant in my comment.

[@HODYODesign]

No worries! I was tempted to buy a European table saw ($$$) at the beginning of the year, but then I realized that it would be probably much smarter for my needs to simply upgrade my DW745 with a new DW7492, and with the money saved, buy a jointer/planer combo (as I didn't have any). That's exactly what I did, and I don't regret it! With my TS55 plunge saw, I can make super clean cuts if I need to, so with my current set of tools, I'm all set ( at least for now)!

[@vigilante2765]

Nice bench, just a question but if u were starting over would u use 2 by 4's or other heavier wood when building the frame ????

[@HODYODesign]

Thanks! I would stick to plywood, as it's a much more versatile/stable/ready to use material than 2x's for this type of build, even though it's more expensive and more time consuming. But I would make a plan first 😁

[@ronachin7444]

I would have because otherwise I wouldn't have the patience.

[@AndrewJohnRevell2017]

Very good. I want one

[@ravenboss1]

what about your table saw fence? Is it your upgrade? Can you tell more about it?

[@HODYODesign]

I added an auxiliary aluminium fence (30x120cm) to get better cuts (the longer the fence the better) as well as fixing the original fence, which was out of square to the table top.

[@ravenboss1]

@@HODYODesign do you have any videos about it?

[@BobSmith-cs9nq]

Good job. Just curious why you didn't use dimensional lumber instead of plywood?

[@HODYODesign]

Plywood and OSB are very stable materials, plus they are widely available here in Brussels, at a very reasonable price. Unlike lumber.

[@user-se1132]

뚝딱 뚝딱 잘도 만드시네요 당신의 손은 마법사 입니다...

[@HODYODesign]

감사합니다!😊

[@phs1994]

Super sturdy. Not sure how much wood have you used? Well done.

[@HODYODesign]

TY! The list of the materials I used here: hodyo.com/how-i-made-my-new-mobile-workbench-with-built-in-dewalt-table-saw/

[@deal492]

Great job, great video and bench.. but I'm mystified why you covered up all the solid lumber with osb??

[@HODYODesign]

TY! I love OSB, just personal taste.

[@allenlewis5689]

The only workbench more solid than this is known as an anvil.

[@philipjones9297]

My word !!! Truly a thing of beauty ❤️ I’m guessing it’s not light 🤣

[@HODYODesign]

Thanks! It's not light, but it's still manageable. And I will be able to undo/redo it, should I move my shop in the future.

[@fredzaspel7350]

I will need a new outfeed table in a new workshop, and this would be perfect. I would love to replicate your work, but I'm not sure I know enough to do it. If you have developed any plans, please share. Really great work! Love it.

[@HODYODesign]

Just watch thé vidéo a few trimes and make some mistakes while building yours, that's how you learn!

[@fredzaspel7350]

@@HODYODesign :-) Just finished another view!

[@rsnook12]

You covered up the plywood with particle board?

[@HODYODesign]

Here's why: a. I love the look, but it's just me. b It's at least twice cheaper than plywood. c. Dents, scratches or holes in plywood catch the eyes immediately, but not in the OSB.

[@mariojhorge23]

Well done. Amazing skills and techniques. Great job

[@HODYODesign]

Thank you very much!

[@Terrythemaker]

Can I ask what made you use MDF over plywood for the top ? Do you prefer it ?

[@HODYODesign]

Sorry for my late reply. MDF is much smoother than plywood, and much cheaper as well. I can sand the top smooth every other month or so and wax it to get a brand new workbench several times a year. And it takes only around 15'.

[@Terrythemaker]

@@HODYODesign thanks you for the response, I’ve just finished mine this weekend and mounted my new dewalt DWE7485 into my bench, but I went for hardwood ply, I’ve put it up on my Instagram if you fancy a quick look, TerryTheMaker 👍🏼

[@massimofranza]

Great work, but I disagree on the choice of materials for the sides

[@ricardoromeromercado7747]

Hola.. acabo de comprar una DEWALT 7492. Haré ésta mesa porque es increíble..hermosa y fuerte.. gracias.. felicitaciones desde Argentina.

[@leopham163]

love the idea of leveling block

[@willymustang3562]

Really very nice job done. Congrats.

[@TheWarrior831]

Thank you for the video! How did you attach that aluminum extrusion to your fence?

[@HODYODesign]

I drilled a couple holes into the original fence and used T-bolt nuts and knobs to attach it.

[@TheWarrior831]

@@HODYODesign Awesome! that is a great idea. I was looking for solutions to add feather boards. Thanks again.

[@andrizeefoshizee]

This is beautiful! What would you estimate was the total cost of materials?

[@HODYODesign]

TY! All details here: hodyo.com/how-i-made-my-new-mobile-workbench-with-built-in-dewalt-table-saw/

[@Glen6819]

Very nice. The reason I watched your video is to see how you accommodated for the riving knife release, but you kind of glossed over it. Can you elaborate?

[@HODYODesign]

Thank you! For the riving knife on this saw, there is a lever on the left side of the table that you must pull to release the knife. Huge improvement from the 745! But you can't access it once you have embedded the saw into your workbench. That's why I built this removable top part, so that I can easily access the lever. I hope this answers your question.

[@Glen6819]

@@HODYODesign Thanks for your reply. I have the same saw and like your plan about the removable part. I have seen another plan that uses an open triangle shaped cutout to reach the release, but I like your plan better. Can you show a picture of the inside of the cutout showing the extra support you built and how you installed it? That is what I would like to see.

[@regislemorse]

Superbe travail, fonctionnel et sobre. Il y a une chose sur ta 7491 qui m'a grandement interpellé, le profilé de la buté latéral que tu as rajouté, d'où proviens t'il ? et comment as-tu procedé pour la fixation de celui-ci ? Du coup tu as perdu le petit curseur sur la règle de la machine pour le coup non ? En tout cas, merci de ton partage ;)

[@HODYODesign]

Merci ! Le profilé que j'ai rajouté est un 30x120 trouvé sur le site Motedis (plus d'infos sur hodyo.com) fixé à travers le guide de coupe à l'aide de 2 boulons en T et deux écrous papillons. Il fait 30mm d'épaisseur et j'ai simplement décalé la règle de 30mm vers la gauche en perçant un nouveau trou pour ses vis de fixation. Il me reste 800mm de largeur de coupe, largement suffisant pour mes besoins.

[@thomasholm6602]

What are all the small holes for? I have never understood :)

[@HODYODesign]

en.wikipedia.org/wiki/Bench_dog

[@thomasholm6602]

@@HODYODesign thanks, but doesn’t that only make sense if you have something to apply pressure with. Or is that the purpose of the t tracks?

[@stephenroper746]

what an amazing bench. What did you use to treat the top of the bench

[@HODYODesign]

Thanks! I used hard wax OLI-Natura oil, it's cheaper than OSMO (my goto finishing product). One single coat, and once in a while, I send the top and recoat it.

[@Cweakley21]

What is the top made out of? Is it MDF? Also was that wax?

[@HODYODesign]

MDF yes, 18mm. I use a German hard wax oil, Oli Natura Hartwachsol. Pretty cheap, perfect for the workshop.

[@luigi33z_]

Hi Eric first of all congratulations for the channel, since in the video you used an aluminum bar in addition to the fence of the table saw, could you explain to me why? I also own a dewalt 7492 ... And I have encountered a 90 degree accuracy problem, also you same problem? How did you fix it ?

[@HODYODesign]

Hi Luigi, yes, the DW7492 fence is garbage and is not square to the table! I checked out two different saws from two different stores,, same problem, the fence is slightly twisted. No big deal if you cut 3/4 thick material, but not so good for ripping tall stock. That why I added this 30x120L profile. I shimmed it using painter's tape! I was planning to add this profile anyway, as you get way better cuts with it, so no big deal for me.

[@luigi33z_]

@@HODYODesign thanks for your explanation. How did you fix it? Have you an link for the your alluminium profile? O a similar one... however, to be precise, I also tried several dewalt table ( n. 2 dw745 and n. 2 dw7492), all the same defects, where less, where more. in reality, even the top of the bench is not perfectly ground, also for this reason the guide is not at 90 degrees on the square.

[@HODYODesign]

Sorry for my late reply! Google "Motedis Profile 30x120L I-Type Slot 6", that is my provider and they deliver all around Europe as well as in the US.

[@luigi33z_]

@@HODYODesign thanks

[@barnabyjones7627]

Excellent design, construction and video. Thank you very much. Would you consider selling plans for it?

[@HODYODesign]

Thank you very much as well! I build almost everything I do on the go. I never make plans, so technically, I can't sell what I don't have, sorry.

[@deathdeny]

Is that just some 80/20 extruded aluminum to extend your table saw fence? Was it easy drilling through the existing fence to attach it? Beautiful table btw

[@HODYODesign]

TY! 80/20, more precisely 30/130 (mm- you won't find those in the US). Very easy to drill, although I'm not proud of the way I made the holes!

[@rosshardy3597]

Wow. Learned so much just watching this. Thanks 🙏🏻

[@computationalchem1313]

Now that it's been a bit, would you change/improve anything on this current design in a v2.0?

[@HODYODesign]

Version 1.1 has a lot of drawers already (check it out my IG) and v2.0 will have a built-in router table.

[@sheelshox345]

How did your attach that extension piece to your table saw fence?

[@HODYODesign]

I drilled a couple holes into the original fence and used T-bolt nuts and knobs to attach it.

[@stephandallons3282]

Superbe ! Je dois définitivement m’en inspirer et me faire une table d’assemblage en y incorporant ma DW745.

[@HODYODesign]

Merci ! Bon courage pour votre table d'assemblage !

[@giuseppebarbato9536]

Compleanno bellissimo video è bellissimo banco 👍

[@jerridedgington]

I have to ask, how much was the cost for this build? I can only imagine it wasn't cheap. Very nice workbench and something I wouldn't mind building myself.

[@HODYODesign]

Thanks! All details on my website: hodyo.com/how-i-made-my-new-mobile-workbench-with-built-in-dewalt-table-saw/

[@jpdude378]

what type of finish did you use on the MDF top?

[@HODYODesign]

I applied one coat of hard wax oil that will usually last at least a few months, depending on how much heavily you use the workbench. I re-sanded the top this week to take the final shots at the end of the video, and I applied a fresh coat of hard wax oil. Good as new!!

[@jpdude378]

@@HODYODesign Great! Thanks for the reply! Great video!

[@antonstafeyev3606]

When your hands grow out of the right place :)

[@mandrillen87]

Great video... May I ask what kind of finish you applied to the top? How many coats, and how well you think it's protecting the surface? Cheers

[@HODYODesign]

Thanks! I use hardwax oil for finishing the top, one single coat. Once the top surface looks tired, I sand it with 120 grit, and I re-apply a new coat. As a result, I have a brand new top twice a year, and it takes me only 15 to 20 minutes each time!

[@gaz1829]

Great job! Awesome workbench! 👏👏👏👏👏👏

[@jimbroome4906]

Do you have dimensions, plans, video, or anything for your older, smaller table saw stand? I have a tiny workshop!

[@HODYODesign]

here you go: kzbin.info/www/bejne/eJyvapiuhqlpeM0

[@guymauve0]

Superbe. Prochaine étape, un ragreage du sol 👌🏻

[@HODYODesign]

Trop de boulot, plusieurs regards et chambres de visite dans l'atelier qu'il faudrait rehausser avant. Beaucoup plus simple, rapide et économique d'utiliser des cales en OSB, ou de fabriquer des pieds réglables 🙂

[@russellfay81]

Beautiful work, especially improvising! I don't have that kind of success with plans! Too bad about your floor, but you seem to have adapted. I'd would, however, like to know how you replaced the fence!

[@HODYODesign]

TY! I just added a 30-120 aluminum extrusion profile (European size, mm) to the existing fence.

[@alindorindicu3732]

Vidéos sympas, merci! Pourquoi ne pas avoir utilisé que de l'OSB pour la structure?

[@HODYODesign]

J'ai préféré partir sur du contre-plaqué pour le squelette essentiellement parce qu'il est structurellement un peu plus rigide que l'OSB. La différence n'est pas énorme ceci dit.

[@alindorindicu3732]

@@HODYODesign Effectivement, je viens de lire, le CTP est 7% plus rigide :)

[@PaganWizard]

I'm a new viewer, and a new subscriber, and I love this build!!!! I would have to modify it a bit to accommodate my Metabo table saw, but that should be easy enough. My heart was broken when you covered that veneered plywood with OSB. BTW, the link you posted for IG is not working.

[@HODYODesign]

Welcome aboard and thank you! Broken IG link fixed! As for the OSB, there are a few reasons why I use it heavily in the workshop: a. I love the look, but it's just me. b It's much cheaper than plywood. c. Dents, scratches or holes in plywood catch the eyes immediately, but not in the OSB.

[@SithLandlord]

Not trying to criticize, but using Plywood for framing was probably not the wisest choice as you had to do way more bracing than you normally would if you'd of used some simple 2x4s (or even 4x4s for the 4 corner posts). This is a workbench, you want it to carry a good load. Also, considering your workshop is so uneven, you should have put on casters that can can each adjust the height so you can make the table level.

[@HODYODesign]

Actually, I couldn't disagree more! 😁 Here's why: 1. plywood doesn't expand and contract like 2x's! Considering how uneven is my floor, I wanted to make sure the whole structure remains as square and flat as possible overtime. 2. 2x's are way more expensive here in Belgium than in the US as nobody use them here. On the other side, plywood or OSB are cheaper (and much much better than what you can find at your local hardware store). 3.Actually, I already bought some adjustable casters, but my floor is so uneven that they simply don't do the job! I had to put some wood scrap underneath my previous table saw station to eventually make things work! Anyway, thanks for your input!

[@annacraft]

Nice work! Also like the t-nut profile on the fence e.g. for feather boards or just an overall better and higher fence :) I have the same saw but did not integrate it into the workbench. 🙋🏻‍♀️Anna

[@HODYODesign]

Thank you Anna!

[@guillaumeripoll1419]

Bonjour, Vous avez à priori modifié le guide de coupe qui n'est pas celui d'origine. Si j'ai bien vu (à la fin de la vidéo, 16:54), il ne remplace pas le guide de coupe d'origine, mais vient s'appuyer dessus pour proposer une surface de guidage plus grande, et probablement plus rigide. J'ai moi même des soucis avec ce guide de coupe, légèrement bombé, et pas assez solide pour que je puisse l'exploiter comme je le souhaite. Serait il possible d'avoir plus d'info (photo ou vidéo) sur comment la modification a été faite (un lien vers le type de "barre" alu utilisée, méthode fixation, éventuels soucis / points de réglages à vérifier). Ce serait top. Merci beaucoup pour la vidéo, pas mal de très bonnes idées à prendre. Guillaume

[@HODYODesign]

Merci pour vos remarques ! j'ai effectivement rajouté un profilé alu 30x120 au guide de coupe (lien sur mon site web) et je pense que je vais finir par faire une vidéo sur le pourquoi et le comment, vu les demandes ! 2 raisons m'ont motivé : le guide de ma scie n'est pas perpendiculaire à la table, et je voulais effectivement une surface de guidage beaucoup plus longue, celui de la scie est bien trop court. Le profilé résout les deux problèmes, avec du ruban de masquage utilisé comme cale pour rattraper la perpendicularité. Pas très élégant, mais efficace.

[@guillaumeripoll1419]

@@HODYODesign Exactement le même soucis ici ! Merci beaucoup pour le lien sur le site, c'est top. Et effectivement, une petite vidéo, ou à minima deux trois photos de la fixation du rail sur la page de votre site seraient top (Si ça pouvait m'éviter deux trois fausses bonnes idées quand il faudra fixer tout ça...) ! Bonne continuation !

[@gonzalezmatthias8183]

I want it for my table saw!

[@lindsayatlmrtransport8118]

Hello, that is an incredible workbench. Congrats on a great build. Do you know how heavy it is?

[@HODYODesign]

Thank you! I would say somewhere around 100kg or 220 lbs, saw not included. It's actually more now that I added a bunch of drawers.

[@derfaust2009]

Sorry the dimension? May be 160 x 120 cm (about). Make me know. Thanks a lot for your beautiful job!

[@HODYODesign]

200x122. More information on my website. TY!

[@BUDs253]

I guess my house was cheaper to build than your workbench... but the result is amazing!

[@HODYODesign]

Thanks! For less than 230€, you must live in a very, very, tiny house! 😂😂

[@Alias485]

Thank you for this video, She is wunderfoll, and the foods 👍

[@enricopanate7964]

Diu fa che travaiun Aldoooo!!!!

[@jameshorrocks2939]

Nice build!

[@GrumpysWorkshop4]

Wow that is bloody amazing

[@HODYODesign]

Thanks Dave! Stay safe!