DIY Modern LED Motorcycle Tail Light With Dynamic Indicator | Arduino

[@AubMar]

Fantastic Useful Safety Project - Thank you for sharing and making the world a safer place for motorcyclists.

[@HAZITECH]

Thank you so much 👍🏻

[@actioncut9888]

hazi tech oya nam niyamai.mn hoyapu ekak oya dala thinawa .adarei broo❤️❤️❤️ 🔥🔥🔥👍👍👍

[@HAZITECH]

Niyamai broh. Share karala support ekak denna 😉. Thawa maru eewa issrahata aran ennam.

[@storm680915]

Nice, i would use this for front turnsignal on a e-step. (red becomes white, and bo breaklight) So i have only two inputsignals. Can this be programmed in a ATtiny85? thank you very much.

[@HAZITECH]

Hey, you have to compile and see whether the memory is enough or not for ATtiny85. And go through my “Automobile tech” video playlist and you will find better solutions too.

[@zen6239]

Great job. New on this, i will make a new tail light for my Ducati 999s .how i connect this in my 5 pin connector? do i need something else?

[@HAZITECH]

Unfortunately I have no idea on that specific wiring. However you need to feed the mentioned signals to the system.

[@crazy.chathubro]

Whoow... thanks request eka ista kalata.. mama meka enakalmai balan hitiye...😍😍😍

[@HAZITECH]

Thanks bro FB dapuwama share karala support ekak denna.

[@sujeshg3753]

hi thank you for the wonderful project, just ask you if i want to change the turn signal colour to yellow what changes to b done in code? thank you

[@HAZITECH]

Hi the colours are given in CRGB(Red, Green, Blue) format. You can change the values to have the desired colour.

[@sujeshg3753]

@@HAZITECH ok thank you

[@prassh1952]

Super. Great work

[@HAZITECH]

Thanks a lot

[@Helloworld519]

Wow. 😘 I like this you video. Good job

[@HAZITECH]

Thanks a lot

[@ruwanekanayaka1545]

නියමයි සර්. තව එකක් ඉක්මනින්ම දාන්න ... Thanks sir...

[@HAZITECH]

Sure. Thanks a lot

[@_photo_lover_z7213]

Codr eka denba puluwanda

[@fringeanomaly9284]

Did u take inspiration from "Ionut Fedaceag"??

[@HAZITECH]

Not at all. Later I saw some videos of his. But this is 100% my inspiration.

[@fringeanomaly9284]

@@HAZITECH no worries .. your project is just as awesome .. thanks for making such an easily followable guide

[@HAZITECH]

Thank you so much and you are welcome

[@uvwuvw-ol3fg]

Are these easily seen in a sunlight? Was thinking about attaching some 5050 30 degree and 60 degree colimator lenses to increase the intensity. It will be a tricky thing to do on a IP65 led strip. One option is to remove excess silicone around the leds or keep them in place with a heat shrink tube and then use a 3.5mm hole cutter.

[@HAZITECH]

Yes of course. My advise to use waterproof strips as I use those all the time. And using a diffuser top of the LED strips make it more visible in daylight.

[@juanlopezaliaga2275]

ppp

[@chandanagamage9951]

Niyama wedak lassanai keep it up ❤❤👍👍👍👍

[@HAZITECH]

Thanks a lot bro

[@Efeazmibeduk]

How can ı use seperate signal lights not connect the stoplamp

[@HAZITECH]

Reach out to us at [e-mail] or via WhatsApp at [phone] for any personalised services or custom job requests.

[@PREMKUMAR-gw7hb]

Bro really amazing I watch all video 👍 ware are you from

[@HAZITECH]

Super thanks bro. I’m from Sri Lanka.

[@VeniceInventors]

Very nice!

[@HAZITECH]

Thanks a lot

[@wawanirianto2130]

Can i do this with my Attiny85?, In attiny it Just have P0, P1, P2, P3, P4, and P5, In this sketch is 3,5,7, and 9 where can i put it on Attiny85?

[@HAZITECH]

First compile the code for ATtiny85 and see the memory is enough. Then please go through my ATtiny video playlist.

[@BeanMan5621]

@@HAZITECH How would I wire it if the pinout of the led strip is +5v G R B I really need help.

[@HAZITECH]

@BeanMan5621 sorry you cannot use those strips. It needs to be WS2812B pixel LED strips.

[@NPLightingCarBikecustomdesign]

Bro, if I want my brake light to blink 3 times and then stay on( f1 brake), how do I fix the code?

[@HAZITECH]

Brother I’m working on the next version of this these days. I’ll release the new video soon.

[@NPLightingCarBikecustomdesign]

@@HAZITECH Great, I'm excited to watch your new video. Thanks bro, I want you to do 2 modes like indo. kzbin.info/www/bejne/jqi1kGmMaJZ2m7c

[@HAZITECH]

Cool. I’ll make it happen

[@timgarrity1070]

Hazi, great work! Did you ever implement the 3x strobe brake light with this?

[@HAZITECH]

Sorry haven’t done that yet

[@timgarrity1070]

I think it would be a great upgrade to your build. Not only for the safety aspect of it but for the fact nobody else really has mplemented it in their code. Based on your current code would it be time consuming to add this?

[@LOYX16]

hello! Excellent work! If I wanted to change the static red light to a fire animation, how would I modify the code? sorry google translator :)

[@HAZITECH]

That would be a big code update. Sorry

[@severin9139]

Hello! I was interested in your project and I would like to repeat it, but I’m not sure that I will succeed. Could you send me a link to download the file? I am doing a project for personal purposes, not for sale.

[@HAZITECH]

Reach out to us at [e-mail] or via WhatsApp at [phone] for any personalised services or custom job requests.

[@matthiash.454]

wooow real top keep it up :-)

[@HAZITECH]

Thanks a lot Matze

[@NPLightingCarBikecustomdesign]

I follow all your clips. and try to test the functionality As a result, the right turn light works. But the left turn signal does not work What should I check if it might be wrong?

[@HAZITECH]

Check the wiring first. And then make sure the led strip LED count is mentioned in the NUM LEDS in the code.

[@NPLightingCarBikecustomdesign]

Check the wiring first. And then make sure the led strip LED count is mentioned in the NUM LEDS in the code

[@kusalaprasanna4099]

How to get is

[@HAZITECH]

Reach out to us at [e-mail] or via WhatsApp at [phone] for any personalised services or custom job requests.

[@qasimsaleem2187]

Great projects that I have ever seen 👍👍👍💓

[@HAZITECH]

Wow thank you so much. There are new versions available. Search “HAZI TECH Bike Light” in KZbin

[@rasheedismile1984]

what is arduino...pls help

[@HAZITECH]

Arduino is an open-source electronics platform based on easy-to-use hardware and software. You can google it for more info.

[@kedar97531]

sir project booted successful but when if use but left blinker it was not working + when using right blinker Hasard light blink. yeah, the tail light works. so no right-left inductor works for now. sir can u guide me

[@HAZITECH]

How many LEDs have you used?.

[@HAZITECH]

And you have to update the number of LEDs that you are using in the code to function properly.

[@pradeeplaksha8005]

නියමයිනේ සහෝ.👍👍

[@HAZITECH]

Thanks bro 👌🏻

[@Gpbuntat-ct9zg]

please make for DRL headlamp too for motorcycle 🙏🏼

[@HAZITECH]

Sure will do.

[@Adam_C_anadian]

I would love to do a double strip like this for my 2013 honda goldwing tail light.... what would you charge me?... lol Cheers

[@HAZITECH]

Sorry I don’t sell. You can make one on your own.

[@Adam_C_anadian]

@@HAZITECH oh OK... yeah I don't know how to unfortunately

[@kedar97531]

Sir first upon I fall in love to your all invention. Sir I need a help. This tail light system can I use to my cycle using power bank. If yes. Then for button like brake light , left- right indicator they need a 12v na. If I give +5 v of my power bank, then indicator will work or not? And what resistor value should I use to this indicator circuit

[@HAZITECH]

Hey. Thanks. Yes you can use a power bank. For 5V signals, you can remove the 22K resistors and give the signal to 10K resistor. (The point where 22K and 10K joined previously). Good luck

[@kedar97531]

@@HAZITECH sir thank you for reply . If it works then I will click some pics of project & share in thr chat box with you.😍❤️🙏🤟👍

[@HAZITECH]

Awesome. You can send those to my HAZI TECH Facebook page inbox. 👍🏻

[@kedar97531]

@@HAZITECH sir project booted successful but when if use but left blinker it was not working + when using right blinker Hasard light blink. yeah, the tail light works. so no right-left inductor works for now. sir can u guide me

[@avinashsharmataj]

Thanks you for knowledgeable videos.. my friend I need your help.. how to make indicator or break light wireless for motorcycle helmet .. please help this I m trying seens last 2 months but I m not successful ... So if possible for you please help...

[@HAZITECH]

Hi you are welcome. I’ll do some tests and see the best way of doing the wireless helmet lights. Allow me some time.

[@avinashsharmataj]

@@HAZITECH please use small part for helmet..

[@HAZITECH]

Sure. That’s the plan.

[@avinashsharmataj]

@@HAZITECH any updates ...? Still i m waiting ... 🤔

[@HAZITECH]

Sorry it will take some time as I have to finish my already started projects.

[@eosekat8943]

Does it works fine in day light as well ?

[@HAZITECH]

Oh yes. You can double the strips too.

[@alvinsetyawan543]

How about Using 6 row 140cm Lamps? is it same

[@HAZITECH]

You can add multiple rows as you want. Same code.

[@alvinsetyawan543]

oke tankxs

[@adsizadsiz.]

Hi bro hov to make rgb tachometer motorcycle ?

[@HAZITECH]

Since I don’t own a motorcycle to test it, it wouldn’t be possible brother. Sorry.

[@trueindia808]

Hi, very nice & use full video, one make video for front light

[@HAZITECH]

I'll see what I can do about that.

[@trueindia808]

Thanks

[@HAZITECH]

You are welcome

[@HAZITECH]

New video will be released in 3 days.

[@prassh1952]

Shall I use 12k instead of 10k resistor????

[@HAZITECH]

You can use 12k for testing. But if your input voltage goes up to 15V, it will damage the Arduino. If it is smooth and stay at 12V-14V. You are good to go.

[@prassh1952]

@@HAZITECH in two wheeler bike 12v battery using. So can we use 12k and 22k .

[@HAZITECH]

Even it is marked 12V, the actual voltages could fluctuate. So check the voltage with a multimeter and if it is below 14V, you are good.

[@prassh1952]

@@HAZITECH ok. thanks very much🙏

[@JuanFunQi]

Hello can i make another arduino wireless using this same indicator for helmet ? more power to you and your channel.

[@HAZITECH]

Excellent idea. I’ll see what I can do about that.

[@JuanFunQi]

@HAZI TECH wow please do find time to make it this will be my next project... By the way I use ur Police_Lights_MultiLED_PushButton and looks ggod on my e scoot😅er Thanks for sharing this

[@HAZITECH]

Wow awesome 👌🏻

[@nguyenhoangson2735]

I like it, wow....

[@HAZITECH]

Thanks a lot 😊

[@hasankaperera771]

Woooooooooow ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️

[@HAZITECH]

Thanks ❤️

[@abyshines]

How to connect two parallel LED strips for two rows?

[@HAZITECH]

Just join signal wires together along with Gnd and 5V. Then feed the signal. Both strips will behave the same. You can use any number of strips in parallel.

[@ArunaKumarasinghe-uq8ei]

Meke nitharama light on ekene theyenne. Off karaganne kohomada

[@HAZITECH]

Power in ekata switch ekak da ganna thama wenne.

[@ArunaKumarasinghe-uq8ei]

@@HAZITECH mata oni oyage car modern tail light eke wage on karanakotama a ratawa awilla off wela ithiri tika wada karanna.

[@ArunaKumarasinghe-uq8ei]

Cord eka wenas karanna oni kothanada

[@HAZITECH]

Eekata nam code eka edit karanna oona. Mama next version ekata danna try karannam.

[@ASP0519]

Здравствуйте можно ссылочку на скетч?

[@HAZITECH]

For code purchase, contact us at [e-mail] or WhatsApp at [phone]

[@NPLightingCarBikecustomdesign]

Nice

[@HAZITECH]

Thanks a lot

[@alexambass_]

It's not working for me. My LED Strip just shows the first LED glowing white. Maybe you can help me!

[@HAZITECH]

Hi. Have you tried any other sample code?

[@alexambass_]

Yes they are working. I‘m using a wemos d1 mini as the controller

[@HAZITECH]

Have you changed the pin numbers in the code to match with the wemos d1. BTW, I haven’t run this code on a wemos.

[@alexambass_]

Yes I changed it to the right one. I just tried some other sample codes and I realised that I have the same issue with at least one of them as well.

[@alexambass_]

I tried it again with my Arduino and now it is working just fine! :D

[@nirusl443]

නියමයි සර්....... Thank u........... Treeweel ekatath light sistm tikk danna sir........ Godaaaaaaaaaaaak thanks 🌷🌷🌷🌷🌷🌷 🌷🌷🌷🌷🌷🌷 👍👍👍👍👍👍👍👍👍👍👍👍

[@HAZITECH]

Thanks a lot. Ok mama dannam.

[@ArunaKumarasinghe-uq8ei]

Mata karaganna oni power on ekedi oya widihatama on wela off wenna.

[@HAZITECH]

Ok mama next version ekata danna try karannam.

[@yusuf120581LED]

Cooolll

[@HAZITECH]

Thanks a lot

[@RahulBuran]

How to operate remote batton control

[@HAZITECH]

You want to control the lights with buttons?

[@muslihmuslih-ft1cq]

code please

[@HAZITECH]

You can buy the code. Email us [e-mail]

[@junushalim4863]

Can i have the sketch sir??

[@HAZITECH]

For code purchase, contact us at [e-mail] or WhatsApp at [phone]

[@SadewNimsara-j6i]

Cord ටික අයින් කරලනේ ඒ්ක ආපහු දෙන්න පුලුවන්ද?

[@HAZITECH]

Sorry, den code wenama denne na. Controllers oona nam ganna puluwan.

[@shanakaudayanga2856]

මෙ ස්ක්‍රිප්ට් එකේ බල්බ් ළඟින් තියෙන්නෙ ,ඒව කොහෙද ගන්න තියෙන්නෙ

[@HAZITECH]

Mama gaththe eBay. Lankawe Borelle Senith eke thibba. Den stock kohomada danne na.

[@DARA-6]

how to wire with switch turn signal?

[@HAZITECH]

You want to connect a switch to control turn signal?. Just give 12 V via a switch to the turn signal input connection. One for left another one for right.

[@DARA-6]

@@HAZITECH but all wire switch turn signal is GND

[@HAZITECH]

Please take a look at the wiring diagram carefully and give signals as mentioned.

[@DARA-6]

@@HAZITECH thank u

[@kitchen9235]

HOW CAN I ON HAZERD

[@HAZITECH]

Give signal to both left and right turn signal wires at the same time.

[@majeedahmadsaadmajeed326]

Price ka hy

[@HAZITECH]

Sorry it’s not for sale.

[@bajnbro]

VU Meter program eka KAWADADA DENNE.

[@HAZITECH]

Bro 7 band eka hadanna order karapu badu thama maga curfew nisa. Thawa weeks 2-3 wath yai.

[@bajnbro]

ela ela

[@HAZITECH]

😊

[@harsharupasinghe2808]

මෙකේ double signal light එක හදාගන්න කොහොමද ? bro

[@HAZITECH]

Bro samahara bike wala double signal enawane. Ehema nethham left and right signal connection dekata eka paara 12V dunnanam hari.

[@harsharupasinghe2808]

@@HAZITECH නැහැ, bro මට ඔනේ කාර් එකට දාන්න.

[@HAZITECH]

Car ekata danna reverse light ekath ekkama thiyana light video ekak heta danawa. Double signal light eka kiwwe bro?

[@harsharupasinghe2808]

@@HAZITECH ඇයි bro, වාහනවලට double signal light දාන්න දැකලා නැද්ද?

[@HAZITECH]

Bro oya video eka beluwada?. Double signal option eka thiyanawa meke. Video eke mul tika okkoma balanna.

[@art_of_cooking_sam]

Pixel led bulbs danna berida

[@HAZITECH]

Puluwan kisi prashnayak na

[@art_of_cooking_sam]

@@HAZITECH ethakota code eka

[@HAZITECH]

Bro onna Pixel bulb walatath code eka edit karala link eka description eke demma

[@dimas-ni6en]

if you want to make LEDs more than that, what coding should be changed?

[@HAZITECH]

Hey, you can get an idea with my following video.

[@HAZITECH]

kzbin.info/www/bejne/Y5ykYZmcdqxjaaM

[@dimas-ni6en]

@@HAZITECH I'm looking for a motorbike not for a car

[@dimas-ni6en]

@@HAZITECH if you want to use this one so that more LEDs do you need to change the number of LEDs?

[@HAZITECH]

It is exactly the same. Just ground the reverse signal since you are not using it.

[@AllInone-yf8ep]

Fatta thawa tikak digata aran thrreeweel walata danna beid

[@HAZITECH]

Puluwan puluwan. Reverse light ekath ekkam thiyana design ekak thawa dawas 2n dennam car, 3 wheeler walata danna.

[@anupamdasgupta4180]

Very nice project. How to get the wiring diagram?

[@HAZITECH]

Thanks. It’s in the video

[@lovethecar6341]

Code

[@HAZITECH]

For code purchase, contact us at [e-mail] or WhatsApp at [phone]

[@всезнайка-ж6р]

спасибо, ты лучший)

[@HAZITECH]

Большое спасибо