EASY Custom Sequential LED Turn Signals

[@CarsWithJR]

Love the pew pew!

[@flyryde]

🔫🔫💚

[@endlessapexofficial]

​@flyryde those are hot where'd you get them? If you don't mind

[@rj1775]

Hey, Chris, enjoy your videos a lot. Nice to see someone who actually knows what they're doing with LED lighting. Wondering if I can easily convert the standard OEM side mirror signal LEDs to sequential style on my 2023 Mazda 3. Searched everywhere but nobody makes an aftermarket option for the 4th Gen Mazda 3. Thanks.

[@OfficialKmAudio]

I'd love you to do some customs for my tahoe i have AlphaRexx headlights now but custom is the way to go!

[@ryanreidhead5513]

Do you need a controller for each headlight or one controller for both?

[@xXAsunaxKiritoXx]

Just got a mk3 supra but didnt want to pay over 400$s to get sequential turning signals for the front corners. I definitely use this vid as an example and make my own with these. thank you very much!

[@BeaverSmashing]

When ordering the panels of Corso Motion led boards I see that they come in a few different configurations (7x2 7x6 etc) can these be snapped apart to make your own sizes? Like taking a 7x6 and making it into multiple 4x2? And do they have resistors pre wired? Thanks for your time, Chris.

[@jonathan.varghese]

Did you ever figure this out? I think the answer is yes but I'm scared since it's not confirmed 😅

[@richriley4638]

Little touches like the indicators make massive differences on the look.

[@flyryde]

👌🙏

[@ledmk2]

Nice made

[@andregerrits]

But what about drl turn signal switchback rgb custom lights would love to see a full video of that

[@uvwuvw-ol3fg]

Isn't there color diffuser required for rgb leds? But that will reduce efficiency and visibility in sunlight due to insufficient intensity (should be at least 3500mcd), so the only option is to put up with green and red color fringing effect which will confuse other road users since flashing green is reserved for voluntary ambulance.

[@bonnaiii]

low key want these on my AE86 coupe for the taillights

[@GoranMilici]

This is where I'm stuck is the turn signals. Don't know if I want blue ghost with the addressable or Corso sequential module.

[@lesliedelcid4679]

Will sequential work and new 2024 rdx????

[@mendeno]

Love this. Tried to look for the free course link in the description but i didn’t find it

[@flyryde]

DOH! Adding it now lol: www.flyryde.com/sequential-pcb

[@ryannelson3755]

Can you post links to the products that you use in the description please?

[@kstoff2218]

Amazing work. Interested in doing this for my 74 datsun Z. Do you do this conversion for customers?

[@EndoftheRd]

Hey do you guys can do as the avalon 2021 All the light is on, and as is cutting off goes out in sequencial..? That's dope..

[@abdullahalrazi3491]

Bro please make a circuit board for RGB sequencial operation with upto 60 LED ..

[@uvwuvw-ol3fg]

Isn't there color diffuser required for rgb leds? But that will reduce efficiency and visibility in sunlight due to insufficient intensity (should be at least 3500mcd), so the only option is to put up with green and red color fringing effect which will confuse other road users since flashing green is reserved for voluntary ambulance.

[@johnnykoch3116]

Thanks bro.. 🙏

[@flyryde]

You got it! For what tho? Lol

[@johnnykoch3116]

@@flyryde the simplicity of it all bro. I love the content.

[@DruMarr]

I came here for sequentials and you start with headlights wtf

[@gunzandthingz3274]

Can you make a sent for an ls400 ?

[@edwincruz8566]

How do you give your LEDs power outside the car to make sure they work?

[@vavevaitui8197]

Whats the name on this led board and where to buy it from please

[@meme2363]

Shouldn’t there be a block or something under the car if the jack fails?

[@flyryde]

Pretty sure there was my dude 👌

[@I3lazeuk]

Hi so you use the power from the turn signal to power the sequential module? As the power from the turn signal is always on/off repeatedly until turned off I can't see how the module stays powered up.

[@flyryde]

Yeah the module only gets power for a fraction of a second.

[@Saleian02]

Have you ever used the thermal paste heat method on these leds.

[@flyryde]

Saleian02 can you possibly ask the same question a different way? Thermal paste is generally used to create a non permanent bond between a component and a heat sink. You said “thermal paste heat method” as though it’s some sort of known technique? As far as thermal paste and LEDs, again, not really something that comes into play on LEDs that are soldered to circuit boards with no need for a heat sink. Some crazy LEDs though do definitely need help cooling, so I’m sure there are much less practical applications that would possibly benefit from thermal paste? Not really my lane to be honest.

[@Saleian02]

@@flyryde lol my bad I meant solder paste. Didn't realized I wrote that until you replied

[@greasyknuckles4707]

So what products did you end up using for these? Looking to do something almost identical to my miata turn signals. Just simple “pew pew” lights with thicker leds to fill the lens.

[@kenhuynh3623]

Hi, can I ask you a question. I'm thiking to upgrade a taillight LED for lexus RX350L 2018. But in America, the taillight flash only.. so is there anyway to bake it then adjust to make it sequential ( lexus in Asia or Europe they all make sequential for their taillight, except America).

[@aleksandarlazov6564]

Hey I tried to open the contract page on your website and 404 error appeared.

[@flyryde]

I don’t have a contact page my man, where did you find the link? I need to fix it 🙏

[@aleksandarlazov6564]

@FlyRide I actually wrote contRact (easily mistaken with the wors contact 😃 ). It is in the description of that video. The link is: www.flyryde.com/pages/contract

[@flyryde]

I think it’s safe to say that when I updated to my new site a few months ago, a ton of my description info was broken 😂. It’ll all be updated hopefully soon 👌 Here you go: www.flyryde.com/pl/85904

[@aleksandarlazov6564]

@@flyryde Yeah I get it 😀 It is okay. And thanks.

[@xXSRS24Xx]

Nice video, question tho. To me the high beam seems to be a reflector bowl (I could be wrong, but judging by video) I was always told Led in reflector housings are bad. Is this true, or not?

[@flyryde]

You heard half of the info. If you have reflector LOW BEAMS, it’s not good to upgrade to LED or HID bulbs because light will scatter into undesirable locations, which can be dangerous to you and other drivers blinded by the glare. High beams just need to be brightAF, period. So if your high beams are reflector and you add LED, that’s totally fine. As long as it produces more light than stock (many LED bulbs DO NOT). There’s no worry about other drivers, since they are highbeam, but I will say that HID high beams suck because they’re not instantly at full power, which means you cannot “flash your brights” unless you have halogen or LED bulbs, which are instant.

[@xXSRS24Xx]

@@flyryde awesome thanks for the info! Guess I didn’t think of high beam and low beam set up.

[@charleybrown4243]

Hi, do you know where I can get a pair of custom side repeaters made? I am after a pair of ekg pulse/heart rate pulse shaped sequential lights.

[@SELF-ACCOUNTABILITY7]

Hi so I have a 1967 shelby mustang the long taillights . What do you think would be the best option for sequential leds that are cheaper? I can do it my self the led kit is almost 300$ which is ridiculous for just a 3 step . Problem is the break light running light and turn signals are the same any help would be appreciated

[@omarsalas1302]

I'd like to work with you

[@fablighting7884]

So rhats what you have been doing😂👍👍💚💚

[@flyryde]

2 trips to San Diego in 1 week compared to maybe 2 trips in one year is a big difference. When you aren’t paying a ton of money for a shop and overhead I guess you can just pick up and go film fun stuff!

[@aedynryan]

This says nothing about the chip use used or how to actually do anything..?

[@quicksno]

Question: do you know of a way to use led bulbs for drl/high beams? I have my drl fuse pulled bc the led bulbs flicker and don't look right. Stock was halogen

[@flyryde]

quicksno what kind of car?

[@quicksno]

@@flyryde 2015 mazda 6

[@flyryde]

Did you try an anti flicker module on the LED bulbs? I’ll ask VLEDs for you 👍

[@quicksno]

@@flyryde no I haven't tried the anti flicker module. I didn't know there was a module for that. Yea let me know

[@djeletropopstarify]

Vau, what kind of car is that

[@flyryde]

JDM Suzuki Cappuccino :) They're so little! Check out the playlist for more about them: kzbin.info/aero/PL_jPzj3LE6RR0R1P9LtS7RfCl6G_y5sRl

[@djeletropopstarify]

@@flyryde it look's like corvette sting ray

[@flyryde]

Mindaugas Berteska IG hahaha, yeah TJs Turbo C8

[@GoranMilici]

Have you seen Colin noir pew life t-shirts. Or something like that. But its about guns. Lol.

[@SRCN999]

this led so expensive :(

[@higherwrldsprodction2955]

mazdaspeed 3s are usually in bad shape. either they look like shit and barely run or you find one over 100k miles and the timing chain and turbo seals are done. ):

[@emmanuelhernandez4468]

Second🤘🏼

[@flyryde]

🏁

[@TheBevis593]

FIRST!!

[@flyryde]

🏁