Lucas dude, Thank You very much. It's just a fun project. :-) Have nice day
@matthewheffernan38775 жыл бұрын
Well done this is very neat work. I use the same techniques to build simpler individual parts. Can i suggest you buy a cheap bandsaw? I bought an old one for $50 and repowered it with a treadmill motor that i paid 99cents for on ebay as it was old and the belt needed replacement. it is great for cutting aluminum and there is no grinding dust. Best $50.99 i ever spent.
@randomposts64654 жыл бұрын
I enjoyed this, love it
@1973canim5 жыл бұрын
Hi First of all, great Channel you have. Can you give me the link of the Belt and gear. I can't find a similar on the web. Thanks
@speedpro21303 жыл бұрын
Parádní, hezká práce.
@THEGREATMIRELIO5 жыл бұрын
Sei un mito👍
@drews0matt4 жыл бұрын
Belt tensioners are great idea
@takayukikun72905 жыл бұрын
Amazing bro
@sotheamam12445 жыл бұрын
That nice work.
@RobertKocian5 жыл бұрын
Thank You very much.
@elcreador66755 жыл бұрын
Excelente 🇩🇴🇩🇴🇩🇴🌎
@angiesantana73954 жыл бұрын
Tiene espíritu de construir pana 😄
@jailsonaraujo57665 жыл бұрын
Muito legal parabéns
@RaigekiFitness2 жыл бұрын
Stark. Respect
@gungriffonbr5 жыл бұрын
Really impressive what motor you use??? In this video?
@RobertKocian5 жыл бұрын
KEDA 63-64 190KV from HobbyKing
@ederbasan5 жыл бұрын
Trabalho bem feito , parabéns 👏👏👏
@RobertKocian5 жыл бұрын
Thank You very much :-)
@RohitYadav-ld8xr4 жыл бұрын
Impressive work sir god bless u
@RobertKocian4 жыл бұрын
Thank You :-)
@ivandjah48694 жыл бұрын
su f .. ng perfect!!
@eksine4 жыл бұрын
he's the human CNC machine, the grinder magician
@jonijoni49634 жыл бұрын
Super bro, may i know the motor(bldc) spec??? Thx
@zouhairmandour1155 жыл бұрын
Goood job bro😎
@almeidynha5 жыл бұрын
Obra de arte... queria ter esse talento pra fazer o meu....
@RobertKocian5 жыл бұрын
I'm starting to blush :-) Thank You very much
@alessandrobendin91784 жыл бұрын
You're a genius!!!!!!!!
@RobertKocian4 жыл бұрын
I don't think so. But Thank You very much :-)
@simplecad74625 жыл бұрын
Nice build ! I have a bit similar drivetrain built too, using 2 idler pulleys. What software you used for design?
@RobertKocian5 жыл бұрын
Hello and Thank You. I preferred this idler bearings for better wrapping of small motor pulley. I´m working with Autodesk Inventor. Now I watched Your channel. Good job ;-)
@Memo.NX14 жыл бұрын
Hi, what happened friend with the mountainboar project, when you put the video showing it, to know how viable it is? What speed does it reach and how many miles does it take per charge?
@RobertKocian4 жыл бұрын
OMG. Did you read the video description? Obviously not :-( Too difficult, right?
@vidadtoso5 жыл бұрын
Que agilidad tienes para hacer piezas con herramientas normales y que te quede caras bien rectas como si fueses usado torno o fresadora
@RobertKocian5 жыл бұрын
On photos or video this parts looks better, than in reality :-)
@Budivedder4 жыл бұрын
Nice work
@RobertKocian4 жыл бұрын
Thank You :-)
@reptiloidx89424 жыл бұрын
Fjederhaek HEY THERE LAD . NEED HELP NOW . IM BUILDING A MONSTER LONGBOARD NEARLY 20 000W AND I NEED THOSE FEET STRAPS/TIES OR WHAT EVER YOU MAY CALL THEM BUT MADE OUT OF PLASTIC . SO DURING THE FALL MY LEG DONT GET RIPPED OFF BY THE STRAPS ............. THANK YOU
@jeremycorsig84134 жыл бұрын
Trop fort bravo !!! Sa va marcher fort 🤣🤣🤣
@RobertKocian4 жыл бұрын
I have no idea, what you wrote. But thank You for Yours post :-D
@JuanGonzalezFlores5 жыл бұрын
the files that were on Google+ is no longer available, is it possible to find it elsewhere? regards !!
@RobertKocian5 жыл бұрын
Unfortunately Google Plus died last week. Some posts are now on my new Fb page. On G+ was photos from the beginning of the project. You may see facebook.com/kocian.info/
@ekkanofiqandriyana73252 жыл бұрын
you are genius.!
@krisfrut3 жыл бұрын
Dobra robota.
@Jon-rc2yy5 жыл бұрын
Cool video
@RobertKocian5 жыл бұрын
I don't think so. But Thank You :-)
@gerokatseros4 жыл бұрын
This is a lesson of DIY
@user-sv8xw7cg4c5 жыл бұрын
Nice work! What kind of glue did you use when sticking a drawing on steel? Write the name.
@RobertKocian5 жыл бұрын
Hello Ильнар. This glue is already gone. Now I use glue Ambersil Adhesive HS 300. I thing it's standard spray glue from any hobby shop. Thank You very much for praise. I appreciate it.
@user-sv8xw7cg4c5 жыл бұрын
Ok, thanks.
@tomeksentkowski71535 жыл бұрын
Great work. Which program do you use for design?
@RobertKocian5 жыл бұрын
Hello and Thank You. It's drawn in Autodesk Inventor.
@krizidrive5 жыл бұрын
Szacun 👍
@RobertKocian5 жыл бұрын
Dziękuję bardzo :-)
@neso10485 жыл бұрын
You really spent a lot of time an effort in this, nicely done Is that 10 mm thick aluminum ?
@RobertKocian5 жыл бұрын
Hello and Thank You. Yep, It's 10mm Alu plate.
@neso10485 жыл бұрын
Woah that is thick x) I’ll probably do mine in 8 mm
@RobertKocian5 жыл бұрын
You right. Save weight where you can. My board is too heavy.
@neso10485 жыл бұрын
I’m building a skateboard so I can probably go with a thinner plate, not as much stress as a mountain board. If you do go for a smaller plate you should probably reduce the opening for the belt tightening bearings, the section of your plate is quite small in this area
@salamalycoom5 жыл бұрын
Clever
@vidlak0015 жыл бұрын
Ahoj, hezký. A další zajímavé vychytávky, například vodní chlazení při sváření. S tebou bych chtěl vymýšlet a konstruovat stroje :-)
@RobertKocian5 жыл бұрын
Děkuju za lichotku :-) Bohužel tě zklamu. Možná jsem divnej, ale nemám rád týmovou práci. To nemyslím nějak zle. Prostě mě nedělá dobře, když mě do toho někdo kecá a rozkopává bábovičky :-D Nápad s chlazením je stejně ukradený u youtubu ;-)
@vidlak0015 жыл бұрын
No ono taky záleží koho máš v týmu :-)
@shanthipreethineela88384 жыл бұрын
Sir i tried to make this at home . I want to know wich motors did you use , what is the kv of motors and what kind of esc ( Ampeer of esc) ? Can you help me
@RobertKocian4 жыл бұрын
See video description ;-)
@user-gr1ly5ty4j4 жыл бұрын
Ремень всётаки короче нужен. Растянется немного, и будет сам себя стирать в области роликов.
@Asteros3D4 жыл бұрын
You just solved my problem with cnc costs not affordable. I am thinking of building monster e scooter.
@RobertKocian4 жыл бұрын
Mini lathe would help a lot. I wish to have one :-) Parts aren't perfect :-(
@Asteros3D4 жыл бұрын
@@RobertKocian Yes. But you are close to perfection.
@RobertKocian4 жыл бұрын
Pictures and videos distorts reality a lot. But of course, Thank You very much :-) Good luck with e scooter ;-)
@Asteros3D4 жыл бұрын
@@RobertKocian Thank you. All the best
@ultralordd76254 жыл бұрын
I get the feeling the theme from the A-Team tv show should be playing in the background.
@RobertKocian4 жыл бұрын
:-D
@madanmohan79394 жыл бұрын
Motor spec
@user-re6hl9gg5j5 жыл бұрын
Большой респект автору, но столько лишних деталей для крепления моторов и столько лишнего труда... и я думаю что веса тоже прибавилось не смотря на то что это алюминий. У меня на Tampa стоят самодельные пластины в 2 раза меньше, а шкивы напечатаны на 3d принтере.если интересно могу поделиться конструкцией.
@edersonsimplis51275 жыл бұрын
Pesado
@de._hrnec._2 жыл бұрын
What motors do you use?
@RobertKocian2 жыл бұрын
KEDA 6364
@usuariouser2244 жыл бұрын
Great
@m.j.steelshop70783 жыл бұрын
How much it will cost in indian rupee... If u make in best price?
@shop-bldc4 жыл бұрын
like!
@lkiller29983 жыл бұрын
what series of motors
@RobertKocian3 жыл бұрын
KEDA 6364
@DJeimaXe5 жыл бұрын
*How much would you charge me to build me one, and to ship it to USA?*
@RobertKocian5 жыл бұрын
I´m sorry, but it's priceless :-) It´s just tutorial and inspiration. I would recommend to buy non electric original mountainboard and make drives. My version is too heavy.
@jungkookjoo62595 жыл бұрын
Does anyone know why it's so hard to make?
@RobertKocian5 жыл бұрын
Because the video isn't fast enough :-)
@phoenixcreations942 жыл бұрын
What are u man ? An alien ? 😃 u r really handfull, smart ! 😅
@excalibur79694 жыл бұрын
Waaouu man
@DA-vg9hm5 жыл бұрын
Czy gdzieś są rysunki techniczne do obejrzenia? Może by taką zrobił?
@RobertKocian5 жыл бұрын
See video description ;-)
@user-vh5eb6ct1n5 жыл бұрын
Класс!!!
@RobertKocian5 жыл бұрын
Spasiba :-)
@martinzumbrunn23784 жыл бұрын
Ich hoffe du machst das geschäftlich?! Dir würde ich gerne was abkaufen oder machen lassen...
@RobertKocian4 жыл бұрын
I'm sorry. That's not my job. I'm just office guy. It´s only hobby :-)
@szu-szu22194 жыл бұрын
How much weight ?
@RobertKocian4 жыл бұрын
24kg
@Jon-rc2yy5 жыл бұрын
Part 3?
@RobertKocian5 жыл бұрын
Almost. Be patience. I am slow lazy man :-) Now building the battery case. See nerdica.net/display/a85d7459-495c-979f-4f33-a01646749450
@Jon-rc2yy5 жыл бұрын
@@RobertKocian that looks nice, canyon w8 for part 3
@keessmit26554 жыл бұрын
Nice job, but welding those bearings.. man those things are screwed up
@RobertKocian4 жыл бұрын
Yes
@nguyenstdiy61445 жыл бұрын
I want link motor
@RobertKocian5 жыл бұрын
KEDA 63-64 190KV
@nguyenstdiy61445 жыл бұрын
@@RobertKocian thanks
@siniy20075 жыл бұрын
аааааааа он приварил подшипники////
@RobertKocian5 жыл бұрын
The bearing is in the hub. It was not physically affected, but yes of course heat.
@lancelotkillz5 жыл бұрын
im limmited by my tools but def not my imagination
@RobertKocian5 жыл бұрын
I wish a real workshop :-)
@lancelotkillz5 жыл бұрын
fucking insane
@amanuelamanuel4 жыл бұрын
Man, I should have studied engineering
@RobertKocian4 жыл бұрын
This is just DIYing. Engineering experience not necessary :-)
@dagimp46143 жыл бұрын
Dude way to improvise
@javieralejandrocastro77144 жыл бұрын
Dey dude, don´t have your kids hanging around when you´re working with aluminum like that, it is real bad for his healt, as well as yours
@user-mx1cm2tg5b Жыл бұрын
Музыкальное сопровождение ужасное, включи, что-то спокойное ...но то что ты ставишь, это пиздец (не переводимое на английский язык русское слово) типа pizdecnahuiblyat