DIY or PRO? Ridgid vs Ryobi Impact Driver Battle [R862311 vs PBLID01]

[@srm158]

I have used Ryobi for about 8 years as a sub contractor/carpenter. Ive been doing work with another dude a handful of months who has mostly Ridgid. And i have to say ill happily stick with Ryobi. Weve burned through 3 Ridgid drills in the last 2 months. Not to mention they have a built in stop so if you have to drill or cut anything longer than about 6 seconds, your tool is going to stop to cool down. Absolutely a pain in the ass.

[@RossMalagarie]

With Ryobi specs close to, the same, or even better than the top 5 battery tools and Ryobi having the largest catalog of tools, Ryobi is making everyone else step up their specs or come down on their price. THANKS RYOBI! 😎👍

[@IanMM88]

I have the Ryobi 4 mode and it's a beast. I've dropped it a bunch of times and it's a lot stronger than I expected. I was gonna upgrade to a Dewalt but I don't think I need to. Imo this impact could be a pro tool. It keeps up with the best of them.

[@Paul_Dalangpan]

Nov 20, 2021 .... That specific Ryobi is $79 bucks vs $129 for that same Rigid. $50 difference.

[@AB.56159]

Good video comparison, I've really been happy with Ridgid tools in general. Ryobi is good too, though Ridgid makes tougher tools IMO + you can't beat their warranty and service agreements! Adding the impact driver head temp. and brushless motor temp. for each drill, post nut torque test would be an interesting addition to your test. Nice video though, wishing I could keep my tools that organized👌

[@Shoptoolreviews]

Glad we could help. We'll try to add the pre and post temp as well. Thanks for watching.

[@sumochop360]

I bought the 4 tool combo kit a week ago. It was $399.00 I've been using them all this week and so far they are doing the job with no issues. My only complaint is the battery charger is cheap looking. The cord is like a cellphone charger not the normal cord on their chargers now and I wish they would've had the 6ah and 8ah batteries since the hammer drill and Sawzall really need those battery to bring out the full power of the tools.

[@Shoptoolreviews]

You are correct, and I should have covered that. The charger is a bit cheap...I wish they included a better charger. The batteries are their largest cost, so I'm not surprised they're not including 6 and 8Ah. Thanks for watching.

[@ToolswithSoAlz]

That Ridgid is a lot more impressive than I thought it would be

[@bluemantom77]

Yes it is truly impressive for what it is if you don't need to upgrade don't upgrade

[@boosted2.4_sky]

Ridgid tool line is a lot more impressive than people want to give it credit for.... mostly Milwaukee fans like to shitt on Ridgid because they bought three Milwaukee tools and want to pose with their drill driver and impact driver...if you are buying 20 tools Ridgid is the way to go... because you will put out way more money for Milwaukee and if you're not a professional it simply isn't worth it.... the Ridgid tools are in my opinion

[@ToolswithSoAlz]

@@boosted2.4_sky I love my Ridgid tools

[@bluemantom77]

@@boosted2.4_sky I agree with you I own ridgid tools underrated even though they're rebranded AEG there definitely worth the money yeah Ryobi has more tools but not everything they make is top notch for the money

[@MrLuisinho90]

@@bluemantom77 I'd also go for Ridgid rather than Ryobi. It's got a better warranty and on top of that I've always found the Ryobi motors to be just too much noise. It gets annoying after a few minutes.

[@hanyoukimura]

Impressive results for both tools. You should consider getting one of the new P195 3.0 Ah Compact HP battery, it's Ryobi's first 18v battery to use the larger 21700 cells. Also, did you ever followup on the shutdown issues you were having with the P262?

[@pumupuku]

I paid $99 for this Rigid impact driver, a drill driver, a 4 ah battery, a 2 ah battery and a charger, refurbished in a cloth case with one year warranty. Looks brand new to me and works great!

[@kennethowens1291]

I'm a ridgid fan. The new sub compact line is built well. They do to expand their selection though. Ryobi has the selection down. They did well with that. Ridgid does one thing right. All metal on the inside no plastic fan.

[@slpurvis1]

Cordless tools are following HD diesel trucks. We are entering serious horsepower wars! The next few years are going to be incredible I believe. Thanks for the video.

[@Shoptoolreviews]

We understand what you're saying. A couple things. First, this video was already 20+ minutes long, and we really like to keep it under this. We typically choose loosening force to focus on, because that's usually what our viewers are interested in, removing fasteners, etc. So, if we need to cut something short, we're going to do so on the tightening side. Sorry to not included all the data you're looking for, we really appreciate your feedback, and please keep it coming. Thanks again for watching.

[@camdenwyatt69]

InstaBlaster...

[@jlousy1901]

Just picked up 2 Ridgid Impact kits for Father's Day. It's awesome that this Impact can break 500 lbs and still work as a highly effective impact driver, all in a great balanced gun... No brainer

[@mike_t_007]

Just got mine and am about to mod it! Let's see if it'll break 550-600🤞🏾

[@enthused7591]

500 ft lbs with a 1/4 inch to 1/2 inch adapter with a 33MM socket with an impact driver? These things are getting insanely impressive.

[@miguelsalazar3239]

Stronger than it's brother Sub compact impact wrench. Should be the other way.

[@mike_t_007]

@@miguelsalazar3239 Ridgid just entered the comment section lol Your wish is their command 😂☺️

[@DiligentDave1966]

I know a Flex fan on KZbin that has the Ryobi impact wrench and impact driver. He says they’re both good.

[@ridemfast7625]

Wow!! The Ridgid Impact Driver with a 2 ah HO battery has more nut busting tq then the Ridgid Subcompact Wrench with a 6ah Octane battery that you tested in another video. I believe it maxed out at 450 tq with 6ah bat. With the larger head on the Ridgid Impact Driver maybe it has a larger motor and mechanics and is more efficient.

[@Rapidfire556]

Which is kind of crazy when you think about it because these 1/4" impacts are really for construction applications and you're really not going to see that very often except for lag screws I suppose.

[@dynjarren5454]

Picked up the combo set back in April 21 and after a year or so Ive got only one complaint...the charger. The tools are rugged and have handled all the abuse Ive put them thru The impact by far is better than a ryobi impact in our shop (as far as I can judge lol). Great set and well worth the $400 or so I paid

[@kb25j]

That's weird - I just bought this same Ridgid, and it couldn't even loosen a 100 ft/lb lug nut (with 1/2" adapter & 19mm socket) that I had just freshly torqued and not driven the car yet. Could mine be defective, or could I be missing something?

[@seangannon193]

what adapters are you using, makita and dewalt adapters just break for fun

[@jeffnorbert1871]

Picked up new P262 half inch impact wrench last week. Bare tool. Yesterday the last 2 pack of P191 3ah HP batteries in stock locally. $109. In vehicle charger for $40. Yes, works for HP batteries. The idea is being equipped for emergency repairs at the side of the road etc. 3ah HP batteries seem like they would be an all around good match for the P262. Ironically what led me down this path is the pitman arm nut on my '92 C2500. 33mm, the same size used in the test and the socket I bought for it is identical to the one in the test. Needless to say this had my interest and after watching the impact driver perform I'm confident in the capability and value these new tools and batteries bring to the table. These reviews you do really are quite helpful. I am a technician (not automotive) and have a habit of thinking things through in advance. In nearly every case when I take something apart its because I already have what I need to put it back together repaired. Tools, parts and everything else. Thanks for the demonstrations.

[@jackspence625]

My only objection to Ryobi drill tools is that they seem to develop what I call "leprosy". The rubber skin deteriorates over time and starts to peel off. I'm not sure if it's from the sweat in the hands or something else, but it is rather hard on the aesthetics. That doesn't seem to affect the function of the tools, however.

[@trentoncorbet1]

Either will do the job for most people... I'm usually inclined to look for reliability as my number 1 pro, had powertools that haven't lasted a year but have cost an arm and a leg.. I do like the look of the ridgid lineup though pricing also looks reasonable, they're named AEG over here in NZ

[@cpzmelbs]

Oh AEG is Ridgid? It's annoying that 99% of info such as these videos are American orientated and really not quite as helpful for us down here. Can all but throw the price comparisons and certain combo kits out the window

[@jinpark5324]

Which brand of impact driver adapter you used? They are so strong to take 500 ft/lb torque.

[@Shoptoolreviews]

The Husky adapters from Home Depot are some of the best. Thanks for watching.

[@louisd95714]

Not that sure why these tests were done when using screws, etc. would be more suitable for an Impact driver instead of using torqued bolts, which s more suitable to run tests for an impact wrench.

[@paulflogeras2309]

Great video. Are you a fan of the new Ridgid Max output batteries? Do you think they really do offer more power. The new brushless option is priced higher then the Gen5X, trying to decide if its worth it, especially with the Gen5x combo kits being sold on clearance right now.

[@dynjarren5454]

High output way better in my opinion

[@momostayzanko2078]

Plz if u can make a review about kobalt xtr impact driver, I think it is more powerful than milwaukee gen 3! Thanks a lot for your continues efforts.

[@Shoptoolreviews]

We're working on it. Thanks for watching.

[@deanfirnatine7814]

The XTR stuff is unreal in performance and for awesome price in comparison to Dewalt XR and Milwaukee Fuel

[@hicder810]

Great video! Can you do a comparison video with the Kobalt XTR as well? Thank you!

[@Shoptoolreviews]

We will do this soon. Thanks for watching.

[@AimingWanderously]

Cool test. I just picked up this Ryobi impact and searched here for any tests that might've been done w/ this model # and this makes me feel really good. Thanks.

[@Shoptoolreviews]

This is a great little impact, especially at this price. Glad you like it and thanks for watching.

[@jake9854]

u r in luck bud, since the hp 2ah is very garbage, jumping up to 6ah hp offer 100% more torque or rpm. ryobi is researching a new type of battery, Edge battery! which let u get the power of 9ah in the form factor of a 2ah Edge battery. heck your hp may even beat ridgid when it comes out, free upgrade!

[@scottbionicnerf8727]

Hey Brother, I wanted to take a moment to thank you guys for testing latest and greatest from Ryobi and Ridgid. Seems like Ryobi has been slower to come out with Truly high performance brushless power tools. I must say that I was thoroughly impressed with the performance of both budget offerings.

[@Onionring1970]

I love my Ryobi tools. But I don't use them daily. If I did, I would probably move to Milwaukee. But Ryobi works for me and they make a pretty good tool.

[@darrenporsch]

What socket adapter you use cuz I can't believe you're not breaking them. I guess it's cuz you're loosening if you are tightening I'm sure you'd be snapping them constantly

[@crazyDIYguy]

Ryobi has the same internals in their higher end line of impacts, power tools etc. The lowest cost Ryobi options are different. Both brands are made by the same company, different colors and marketing wank are the only things that differentiate a majority of them. 💯

[@jessedukelacrosse6470]

In Ryobi case, no magnet tray, not interested :/

[@TheSturtyT]

Your 2.0 ah ryobi isnt just an hp battery its hp "high performance" . high performance batteries are ryobi's newest version of battery. Your 3.0ah and 4.0ah are your standard hp

[@Shoptoolreviews]

You are correct. Thanks for watching.

[@DiligentDave1966]

Both brands have a 4 mode now.

[@paintballfreddy]

I was planning on getting a ryobi drill/ impact combo but i guess rigid is way better option when it comes to price/quality ... Ryobi are 179 for the combo with 2.0 batteries and each 4.0 and 5.0 ah batteries cost more than a 100 each so at the end of the day we'll spend way more on ryobi than rigid for the same performance🤷🏼‍♂️ I need both tools for medium-heavy work. Is rigid a good option or should i go with a different brand?

[@fredflintlocks9445]

Had an old Ridgid impact I used for HVAC work for 2 years never failed me I had a battery die once after it fell ~15 ft but the driver was fine got stolen one day so I guess someone thought it was nice enough to steal

[@theTealStory]

Idk what cells are in the new ridge battery’s but I know ryobi is still using less power-dense cells in all of theirs but their compact 3ah hp battery.(p195) 21700 vs 18650

[@PhillyFixed]

Is it just me or is it impossible to find the Rigid in a bare tool or even a non-combo kit without a drill or something? Just not out yet?

[@billyschannel997]

You can find the R86 model by itself (basically the same tool)

[@PhillyFixed]

@@billyschannel997 Right, but my comment is a year old.

[@billyschannel997]

@@PhillyFixed In case anyone else was trying to find this tool a year later

[@PhillyFixed]

@@billyschannel997 the weird thing is, Ridgid's product releases have been so closely spaced that they already came out with the new R862312 model. Kind of crazy!

[@renalshomlmes338]

What driver adapter are you using? I snapped mine off inside my driver and have to try to get it out now, but will need a good replacement.

[@Shoptoolreviews]

We actually made a video on removing broken impact driver bits. The DeWalt, Husky, and Harbor Freight bits hold up very well. However, we do notice that everyone seems to change the designs on their bits on a regular basis. kzbin.info/www/bejne/mqWTnZdqqtpoetU&lc=UgyFqr5g2zuh9jf4aSt4AaABAg

[@123jack7]

With its tightening force like that, Ridgid R862311, do you think it can open the screw of the pickup wheel, thank you!

[@Shoptoolreviews]

It probably could if the lug nut on the wheel was tightened properly, but we would not recommend this impact driver for use on wheel lugs (screws). Thanks for watching.

[@MrRubenrivera9649]

TTI good tools I would use both contractor ridgid 1st ryobi as back up

[@Shoptoolreviews]

You are correct. Thanks for watching.

[@joshuahunt1210]

It's the same picture.... Also, I own the Ridgid and it does not have the contacts to take advantage of the Max Output battery. (Take a look) I'm not sure about the Ryobi because I don't own it. But I would say there will be no difference between the Max or the standard 2ah battery on the Ridgid.

[@smartmeis]

I really like the ridgid, but I believe Bosch is what I should go with, or kobalt xtr, and ryobi to fill in the blanks.

[@bobbiecottrill332]

I have a Ryobi 2 ah high performance and it makes my Ryobi compact hp impact driver run a lot slower and less powerful than with a 1.5 ah black battery. U can hear the difference and I tried it on other one plus brushed tools and it does the same. Your feed back would help alot bc it doesn't make sense. They should at least be the same in power but there's a big difference. Ty

[@albertchavez7069]

See if you can see a difference on the flash light but I've noticed the same on the 4ah battery I seem to get more power with longer life from the reg battery

[@Jarco101]

Wow. Didn't expect that much power. Thanks for having us educated on new power tools

[@Shoptoolreviews]

They are pretty impressive.

[@Its-Steven]

Ridgid, Ryobi, and Milwaukee are all made by the same Chinese company, TTI

[@Shoptoolreviews]

Correct, and Hart. Thanks for watching.

[@BannedOnMain]

Not 100%. TTI has the licensing to produce tools under the ridgid name. They are not the same as the pluming and pipe fitting tool brand Ridgid.

[@danielreyes-lk4lq]

Buenas noche Buenas noche tengo 2 pistola de impacto Ryobi 1/2 370Lb torque y la otra Ridguid1/2 500Lb torque ambas bateria 4amp cusl es mejor.

[@kamehouseboxing7142]

Use the ryobi for commercial and residential glazing. Works well!

[@rdaffon23]

Good review! btw, what type of torque gun is that you're using to set the lugs?

[@Shoptoolreviews]

HYTORC Torque Gun We've reviewed a few of their guns. Thanks for watching.

[@Ryan-ki3pw]

Why would any homeowner, DIYer, or shade tree mechanic need to purchase an actual impact wrench after seeing these results. I know it lacks the fastening torque but we are usually looking for help removing fasteners instead of torquing them back down.

[@Shoptoolreviews]

We get what you're saying, but it's not entirely correct. Yes, our testing shows them breaking free fasteners tightened to 500 ft-lb, but these are cleaned and greased before each test. Not really real-world stuff. You will definitely encounter lug nuts that were torqued to ~120 ft-lbs, but after months of driving, rain, mud, and snow, it will take more than these impacts can deliver to remove the lugnut. This is where you need a harder hitting impact wrench to break these free. It's like using a tiny hammer to drive a large nail. You may be able to do it, but it's going to take a lot more strikes. Thanks for watching.

[@ridemfast7625]

I took the inverse of that. Have the Ridgid 3/8" Subcompact Wrench and also use it for screws and lags. imho - not needing a hex/socket adapter for sockets is a better way to go. Especially for impact wrenching. And a small socket is all thats needed for screw bits. And lags require sockets. Also, the 4 speeds including Auto Mode are a lot more useful then I would have thought. These newer models are so powerful and versatile that no bad decision can be made.

[@MrLuisinho90]

​@@ridemfast7625 totally agreed. As these videos show, too much torque ends up breaking the 1/4" to 3/8" or 1/2" adapters more often than not. And there may be some minor torque looses around the way by using adaptors. That' s why I love my Bosch Freak 2. It does have a 1/2" anvil with 1/4" socket and it works great with my 1/2" impact sockets

[@danielboone94]

Can you do a video for a ll the one key owners of milwaukee and tongue limit test their precision drive modes. Basically their torque limiter. I have a 2769-20 and 2864-20. I'm a tractor trailer mechanic and being able to use the gun instead of sticks and torque ratchets would be really cool. Or get the tool even closer to spec.

[@Shoptoolreviews]

We already did this. I’ll post the link below. Thanks for watching. kzbin.info/www/bejne/oZe7kKWlebCMi6M

[@danielboone94]

@@Shoptoolreviews thanks

[@Yata69]

Look up part numbers, might be shocked. Internal parts anyways!

[@gregoriodecker2692]

You shouldn't tighten with any impact.. especially a wrench.. you can snug it.. and then use a torque wrench... unless you know 100% you will not twist a bolt... especially lug bolts.

[@JAMESJJEFFERS]

I Really would like to see some Real World Applications.. Like Rusted Exhaust, Brake and Suspension Nuts and Bolts from 12MM- 17MM or 3/8s - 5/8s... Anything higher I would use a 1/2" Impact... I wish someone would do a review on those type of applications...

[@Shoptoolreviews]

We can do that, but you can't replicate that type work. In other words, you can't continue to find rusted fasteners that are the same size, torqued at the same amount, with the same amount of corrosion. We understand what you're saying, but it's just impossible to do in repetition. That's why we try to use testing methods that provide repeatable tests that provide repeatable quantifiable results. Thanks for watching.

[@CMOS357]

Ridgid coming in kicking azz 500 ft/lbs off a 2ah 🔋battery ! Ridgid has stepped up its game I like what I'm seeing I think I'm going to go buy that impact driver 🔩

[@charandeep7ingh]

Screw RYOBI i am going to buy RIGID, Appreciate your each minute of sharing very helpful video. God bless u guyz

[@willarddickerson921]

I appreciate the help. I will stick with Ridgid.

[@jesse33hdz]

Can you guys check out the skil 12v 3/8 impact please?

[@Shoptoolreviews]

We will do so very soon. Thanks for watching.

[@flushometer19_8]

Tim i Think These Are for Professional Superintendent Use

[@Shoptoolreviews]

Exactly! Thanks for watching.

[@daleromney6062]

The Amp Hours should really only affect how long the battery charge will last. It should not make a difference in the power of the tool. I think if you had just kept using the 2 AH battery, it would have worked too.

[@Shoptoolreviews]

That's not totally true. In theory, you are correct, the Ah is more of just the size of the fuel tank. However, what actually happens (and it's worse as the batteries get smaller) is that as the tool is under load, the smaller batteries tend to drop voltage quicker, so this in turn drops power on the tool. Thanks for watching.

[@daleromney6062]

@@Shoptoolreviews I would be interested in a test where you show the voltage drop happening. I can believe it, it just doesn't follow my understanding of the amp hour rating. Thanks for responding.

[@mike_t_007]

Another great video from you guys 👍🏿👍🏼👍! Wonder if the Ridgid could break 550 ft lbs if they went for it

[@stevefarrington5618]

Both made by same company as Milwaukee and hart. Ryobi wears out much much faster than rigid but same as hart

[@KingYang05]

Both outperformed Snap On. Lol

[@Shoptoolreviews]

Very true, very true!! Thanks for watching.

[@scottbionicnerf8727]

I think the Auto-Mode is a little redundant for all the 'novice' or 'would-be' user. It seems every tool line/manufacturer has a different criteria for what Auto-Mode should be.

[@Jacksquatch69]

Is reeeeee Obie the correct pronunciation.? Never heard it called that before

[@Jacksquatch69]

Apparently it is correct. Ignore me wow.

[@slaptasagentas296]

Upgraded from an older 18v kit. kzbin.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.

[@XerxezsX]

Adapters take away a lot of torque from a tool 👌also the Ridgid 3ah discontinued octane batteries give you 4.4%+ more torque on the Ridgid octane tools.

[@mike_t_007]

I smell a Ridgid Frankenstein in the near future👍🏿👍🏿👍🏿👍🏼👍🏼👍👍👍😊

[@nicksrandomviews1296]

I would call ridgid the pro and the ryobi the diy

[@Yata69]

If I ever need 200ft pounds, I'll buy the 1/2 in drive! I just purchased the 4 mode Ryobi, im sure i will be happy. I just retired the quiet drive Ryobi, cause I accidentaly tossed it 30ft and the motor mount broke. It was run over by a 42 ft scissor lift and was dropped from a 32 ft scissor loft, but finaly was broken when I threw wire and accidentaly grabbed it and it hit just wrong!

[@DiligentDave1966]

Ridgid is finally expanding their line soon.

[@deanfirnatine7814]

Not sure how those are "near identical results" the Ridgid is clearly the more capable tool.

[@Shoptoolreviews]

Yes, we do see how you could say that. We see it that both tools accomplished the same results, it just took the Ryobi a different battery to do so. Also, both tools were beyond the limits of their marketing claims, as we see it. You have a good point. Thanks for watching.

[@jasonhull2163]

I’m not bashing these tools but I really don’t understand why Ryobi and Rigid claim insane inch lbs when they are nowhere near close to that.

[@Shoptoolreviews]

That's what we always recommend. The auto-mode is not meant to be precise. Thanks for watching.

[@jasonhull2163]

@@Shoptoolreviews I wasn’t meaning anything towards your channel just in general they advertise over kill.

[@averystorey6486]

Just wondering when he say twenty-three hundred does he mean 230 in-lbs?

[@cerealkiller4341]

He means 2300 in-lbs, convert that to ft lbs and its 191 ft-lbs

[@Shoptoolreviews]

Like @CEREAL KILLER said, 2300 in-lbs is 191 ft-lbs. Thanks for watching.

[@TheAarowsmith]

Both brands are Made by same company in China by TTL Inc.

[@Shoptoolreviews]

TTi. Thanks for watching.

[@DIY-Stuff87]

I love this channel

[@Shoptoolreviews]

Thank you very much.

[@JesseHoff]

Just picked up the RIgid 862311, same one in your video, and I'm having trouble even busting a lug nut off that I tightened by hand. Couldn't be more then 150 ft/lbs. Maybe you got a special one, I don't know, but I'm not seeing the same torque busting power. I am using a 3/8" drive, but I don't think that should matter that much. In the tools defense it did break a cheaper 3/8" drive bit in half before I tried my better quality dewalt one.

[@TheEnvirotest]

Ridged Brushless it my choice

[@jerrodnewsome1495]

I am shocked that they managed 500 ft lbs but when I buy tools I am more concerned with the longevity of the tool because I want them to last a very long time so I go with milwaukee they are just about as dependable as they get not to mention the quality & performance that they have.

[@anthonypatterson8796]

They're owned by the same company so they got your money either way.

[@kevinhokes1849]

Ridgid has a lifetime service agreement. Even the batteries are covered

[@tbirdstube2618]

Do a drop test

[@boosted2.4_sky]

Im pretty sure those 2 are exactly the same..🤔

[@Shoptoolreviews]

I would venture to say they're almost identical. I think there may be some funny business going on with digital tuning, but that's it. Thanks for watching.

[@boosted2.4_sky]

@@Shoptoolreviews yes...I agree

[@DragonBuilds]

Ryobi is a good cheap tool for occasional use, but Ridgid just feels odd. Slightly less expensive than other better brands for an inferior battery platform.

[@Mik3yLow]

Care to explain? Because. . . Milwaukee, Ridgid, and RYOBI are all made by the same company. Ridgid filled the gap and created straight up 'power' tools with the Octane line. Completely unmatched in EVERY WAY by Milwaukee, which only has a longer lifespan(than average, not ridgid) by processing and functioning at a much slower rate. And unmatched by Dewalt as well, which derives power from heavy amp batteries having better quality output than the tool it's put into. Hints the ridiculous overheating as soon as you start one, and a battery amp hour that dies at an eighth of that time. . . . .Let's be honest. So, Milwaukee makes everything under the sun and already has the "high quality" label. Now suddenly, RYOBI is beefing up their power tools as well as introducing a huge line of larger equipment like mowers, pressure washers, chainsaws, augers, etc. So basically they're shitting on the Ridgid name because they're tired of spending money with the only LSA available, because people do utilize it. They're tired of our shit and want us to buy their red and green shit. Fuck them up their stupid asses. I'm switching to Kobalt; the only other brand I've found(though months of testing for work) that out performs both "Top quality brands". So just wondering if you actually came to that conclusion from experience or because it's what you're told.

[@Mik3yLow]

For instance, the last 2 days I've been installing a fence at home. I put a large auger attachment in my Ridgid Octane drill driver and dug 22 two ft holes, through solid clay, and mixed all the cement, using only 1 and 1/4th 3ah batteries, and never once did my drill get hot. Ever. There's not a tool in the world by any brand that could match it. Especially not those top two brands, in either spec.

[@encapsulatio]

@@Mik3yLow So you think Kobalt is better than Rigid for their impact wrenches?

[@4673962]

Ridgid all day. I have both platforms.

[@Shoptoolreviews]

Can't go wrong there. Thanks for watching.

[@4673962]

@@Shoptoolreviews 👍

[@josephrowley9701]

Big Ridgid fan. Tools last and LSA is a deal breaker. Been using and abusing Ridgid as a plumber for 7 years. And I love what they're coming out with now

[@4673962]

@@josephrowley9701 I've had ridgid tools since 2011. Still have all my tools. Not one problem. Original batteries also. I did have a charger go bad one time. I left it in the hot august sun while it had been charging batteries all day. I called in for the LSA. They asked what the problem was. Confirmed the part number and my address, that was it. About 4 days later I had my new charger. I work construction and I use my tools a lot. Never had a problem with any of them. Love my ridgid tools.

[@josephrowley9701]

@@4673962 I'm looking forward to the cordless nail gun that comes out this summer. As I get older I notice I'm getting lazier. I'm done swinging a hammer for backing. I'm going cordless 18v ridgid nail gun lol

[@AnthonyChhan]

It's weird, they're almost like twins of only different colors being the difference.

[@Shoptoolreviews]

Imagine that?! They are very similar. Thanks for watching.

[@mattek519]

How can anyone be saying these two are identical after seeing the stomp ridged just put on ryobi here? Even better check the ridgid stealth vs the Milwaukee surge and watch the ridgid it too

[@JamesMKE]

@@mattek519 The tool itself is. Sadly Ryobi switched to China made 18650 cells they don't perform as good as the Name brand Cells in the Ridgid packs. thats the only difference really.

[@toddwilliams8911]

Dude, enough with the whooshing sound effect every time you move your hand. It was so annoying I had to shut it off at around 2 minutes.

[@stinkycheese804]

I would rather a 1/4" impact driver shut off if you attempt 200 lb-ft or more. That's hard on the tool, and hard on the bit. That is why 3/8" and larger impact wrenches exist, so wrong tool for the job. Having to use an adapter should have been a hint.

[@tangodown2721]

They are literally the same tool

[@skoronesa1]

Neither of those are actually pro models.

[@camilo8cheryl]

I think Ridgid owns ryobi

[@mike_t_007]

TTI owns both

[@ZeusAndKiller]

Bro if you're going to use a high output battery with the Ridgid then you have to use a max output battery for the Ryobi! C'mon man! (Joe Biden voice)

[@cismoautorepair7061]

ryobi didn't do it get out of here ridgid is lot stronger than ryobi

[@MasterYooda94]

You can tell by looking at these two that it’s 90% identical tti just slapping different color and name lol

[@redneck1572]

First

[@Shoptoolreviews]

Thanks for watching.

[@maverikbursch2797]

Calling rigid pro is laughable.

[@mike_t_007]

For plumbing tools yes

[@firebirdlover4460]

No it's not. Ridgid is very much a pro line tool. It's on par with Dewalt, I would say more reliable and longer lasting. I dropped dewalt after I had two drills literally burn up on the job. My Ridgid tools have never done that. And there are a LOT of tradesmen who will agree with me. Milwaukee and Makita beat it out, but not enough to justify the extra cost for a lot of trades.

[@petemitchell3563]

I hate the way you pronounce Ryobi.

[@Shoptoolreviews]

I'm sorry that we correctly pronounce it. It was originally a Japanese company and it's pronounced Ree-O-Bee. Watch any of the RYOBI manufacturer videos. Thanks for watching.

[@totalyep]

Test a real one not these Mickey Mouse brands.

[@Shoptoolreviews]

We do that quite a lot. We also like to include entry-level tools as well. Interestingly enough, both of these impact drivers just performed better than any other impact driver has done, so far. Just sayin'. Thanks for watching.

[@totalyep]

Shop Tool Reviews better than a Milwaukee?

[@KingYang05]

Yes. You can see it in his previous videos. The Gen 3 M18 FUEL topped out at 450ft pounds.

[@juanc5149]

These Mickey Mouse brands just bested your “top tier” brand. So ya.

[@totalyep]

Juan C there is more to it than torque, but I’ll check that out.

[@cismoautorepair7061]

you remember that i told you you made a video on Ridgid braking more than 500 hundred and you and the other guy say no no was 400 hundred this is the proof that I was correct Ridgid impact driver is the Milwaukee Dad gen 3 and 4