DIY Pebeo Paint Pendants

Check out our curated tool kit: www.backtoearthcreations.com/...
Thank you so much for watching! My daily tutorials are sponsored by our Craft Along Club and viewers like you; please like share and subscribe and feel free to follow me on social media:
Facebook: / back-to-earth-creation...
Instagram: / back_to_earth_creations
Please consider joining our Craft Along Club to participate in our exclusive streams, monthly craft crates, digital downloadable content, and behind the scenes updates! www.backtoearthcreations.com
amazon wishlist: a.co/84BBWxX

[@LynBugLover]

Thank you. It’s the first of your vids I’ve seen and, as well as being really informative, you are incredibly engaging.

[@amandajones6481]

Hi Yvonne, I love these Pebeo Paints, especially the Prisme ones. They give such a cool 'honeycomb' or 'cellular' effect. I find that the Prisme paints work best in bezels because, when I tried dripping it on some old polymer clay pieces I had (which I didn't like the look of!!) I found that the paint dripped off the sides, so you need a bezel to contain it. Thanks for another great video sweetie. Love from Amanda in Australia ❤️ xox

[@maryellenrichards391]

WoW! I am so far behind what is current. I love these pieces that you created.

[@nancyclingan5396]

I finally subscribed to your channel after watching it for a while. I don't normally do things like this but I just felt I really wanted to! You are so talented in so many different medias that I like and now this Pebeo Paint that really peaks my interest that I just had too! I have been learning how to do the jewelry/wire and love it! You are such a good teacher that it make it easier to learn! Thanks so much for doing such a great job! I really loved the white background and blackish silver on top! That was my favorite one.

[@angelsandfaes]

pebeos are the bomb. Love doing resin work with them. keep up the awesome work

[@kathryncastanares525]

Your work is breath taking.

[@sheilahauser7564]

Wow the red and buttercup with the crimson is gorgeous. I’m going to have to go do this

[@Rendosian]

Thank you! Beautiful as always! Ian’s thank you for showing how to use the Diamond Glaze. I’ve been using mine wrong all this time!

[@highhopes151]

I am so going to have to try this. I have got the pebeo watercolour half pan paints and love them but I can't wait to try this!

[@andreataylor3354]

cannot wait to get these pebeos!! You are my favorite Talent and Beauty on KZbin xo

[@BlueAzuil]

I love this medium. I use it all the time as a background in pendents etc... or to highlight other pieces of pewter/metal trinkets. Its also fun to use on a journal cover as the base.

[@lindysmith13]

They all look nice. I agree with you about the opaque red taking over. At first there was some pretty yellow in there but it got swallowed up. Good call putting more in after it dried a bit.

[@CandiceErika]

I purchased the Prisme Fantasy discovery set. This product makes incredible backgrounds. I add organics and then a layer of coming resin. Glitter added to wet Prisme adds a bit of sparkle. This will make great starter inventory for my shop. Please do a tutorial on how you combine this with Polymer clay.

[@khoney32]

That looked fun. I always laugh at your funny comments. Pretty

[@youmorgana]

Lovely tutorial. Thanks

[@micheleglaser142]

thanks for sharing these are beautiful

[@mamacitajen2777]

Great video, wish you would of shown how to do the wings too! 😁

[@jsn1219]

Thank you for your video. if don't use Diamond Glaze will be ok?

[@chrisharrison5974]

I really enjoyed this video. Love all Pebeo paints but the fantasy range has to be my favourite. I have ordered some pendant trays to make jewellery to sell if I can part with them 😆. Your clay wings are gorgeous, did you apply the paint with a skewer ? Did you use Diamond glaze to finish them off ? I have become a subscriber, I love your style and look forward watching your other videos. Many thanks xx

[@leorabyrd5926]

these would be fun to decorate a small Christmas tee with

[@shirleybryan2572]

Digging into my stash for bezel trays. Woohoo!

[@dawnsunpath2461]

Just what I needed... a new hobby lol These are beautiful! Can I ask what the music you play in the background is ~ very soothing

[@shielacushenbery5635]

dawn sunpath - if I'm not mistaken, that is Von strumming on her guitar.

[@LucindaSchersing]

Hi Von! Nice!! Something to consider! :) You were speaking about mixing the paints...Have you considered using b-bs to mix?

[@geralyn2011]

They are nice.... you seem to be knowledgeable on the pebeo.. have you used them to paint on glass... i would like to use these to paint wine bottles ...is it possible?...i know they look runny but is there a way to paint horizontally without the product that outlines the paint.

[@murphy1384]

Beautiful.....

[@robinfeliciano9787]

Wow those butterfly wings are a very beautiful! Is there a cutter for those?

[@abbyabc8429]

You need to make nfl football colors like black and yellow steelers green and yellow green Bay this is cool

[@ruthiek5340]

What is the "pim" or "pem" coating you spoke of for coating the backs of your bezels to block metal allergies? Is it polymer inclusion like Sculpey Glaze or something similar?

[@lisalange4922]

@yvonne.....can you tell me what the product you sprayed onto the bezel to protect against the pendant making the skin green? I think you said Pim?

[@patriciapeterson2820]

Love it❣️. How about glass dots? You do a great job!

[@CandiceErika]

You are costing me a fortune girl. I am getting Prisme and a bunch of bezels. I think this would make great backgrounds for pressed flower pendants. Alcohol ink does some interesting things as well.

[@sarathorsten6936]

I wonder how some of those effect paints would look on dragon eyes? Not sure if they would work with your layering techniques though.

[@rachelabrams6788]

I can't find black trays anywhere. Where did you get them? Do you sell them? I really want to buy some. If so, what's the name of your business, website, etc. Thank you for a very informative video.

[@lbhoprsnfd1553]

So you think a small object sould be put in it. Like a 🐚 or ???? What is that Pim spray ?? Thanks

[@nancyfranck4670]

Did you use the pebeo paints on your bezels or did you buy them in black?

[@mystica97]

For my pebeo paints, and i do own a lot, i use ceramic round pie weights for agitation. Just a thought. :)

[@sheilahauser7564]

What will you do with the butterfly wings?

[@Rendosian]

Sheila Hauser yes! We need a tutorial on those wings!

[@noeway1987]

I'm late to the party, obviously, but if you happen to see this Yvonne, how long should I wait before adding gems, charms, etc? Do I wait until the paint dries completely, or would you try at like 24/48 hours?

[@AmyzJunkJournals]

can you add a link for what you spray on pendants before you paint on them thank you

[@gillfield1662]

Oh no! Another thing to try!!! :-)

[@backtoearthcreations]

muhahahaha!

[@mariab.1997]

You could take some 3/4 to one inch wide leather strips and place the bezels on the leather with the bail off the edge.

[@glenbengough5160]

What did you say you spray on the back please?

[@sheilahauser7564]

Words are hard!!!

[@coltonbobbyleggsmcgee4116]

Hi! Just found you! :) I watched your video on the wire wrapped polymer clay cabachon. I was wondering how you did a domed cab with the Pebeo without a tray or bezel? Did you use a flexible mold? Thanks!

[@backtoearthcreations]

Hey! I did those cabs with a different paint: the halo paints by lumiere. though I would like to experiment with pebeo on flat cabs, just to see! I think I would have to have some sort of edging, though.

[@coltonbobbyleggsmcgee4116]

Yvonne Williams I’ve done the Pebeo in the trays as well and what I didn’t like to much was how they kind of sunk in the middle. They were not level with the top. Maybe I just didn’t use enough paint. That’s why I loved how you did those pendants domed like that :)

[@williemccowan6924]

Hello Everyone I have a question. I want to make a certain size pendant. Can i use a outliner to create what i want. Then add the color to it let it dry. But would it be too stuck to what you did it on to pick it up please let me know

[@tricia19632004]

Beautiful paints and great ideas and can’t wait to try these. I have a question related to the glazes/resin. I have some bismuth crystals and pearl white abalone shells I would like to used in pendants but both are brittle. I need a coating to make them stronger, that will not peel, and allows their pretty colors to come thru. What would you suggest?

[@Rendosian]

tricia19632004 Hi! Bismuth is stronger than you think, just FYI. But the best thing to use, IMO, would be resin. There are a couple kinds to use. There is the two part and UV resin. Two-Part: Best I have found is Easy Cast. You have to measure or weigh the parts out equally, but it’s very forgiving. Just follow the instructions. It’s cheap, but takes 24 hours to cure. Best place to get it is Munro Crafts.com they have price breaks at various levels. If you spend $200.00, they knock 50% off your order, dropping it down to $100.00 and then 50% off the rest of your order. They also have one Tuesday of the month where you spend $50.00 and they knock it down to 50% off, etc. UV: Is a 1 part resin that cures in seconds when exposed to the sun or a UV light. Problem is it can run kinda high. If you need it immediately, Sophie & Tophie.com carries it, but again, pricey. If you have the time, Wish.com has it and it’s super cheap. But it comes direct from China, so it will take up to a month to arrive. I know this was a lot, but I like to be though. 😄

[@tricia19632004]

Jacob Pranski Thank you Jacob. That is very helpful. I don’t mind waiting to save money. I ordered a few 5D diamond paintings from wish. Not too bad of a wait. Less than with AliExpress. I was thinking about the UV stuff already for making some steam punk cabochons. Still mulling it over. : )

[@Rendosian]

tricia19632004 You’re quite welcome! Wish is amazing, esp for silicon molds, etc. I also order a good bit of gems and crystals from them with good results. As far as UV resin, it’s my first choice simply for the quickness of it.

[@tricia19632004]

Jacob Pranski Hi Jacob. I am looking at wish and wondering what brand name of 1 part uv resin you get.

[@Rendosian]

tricia19632004 I think you'll like 25/100/200g UV Curing Resin Solar Cure Rare Hard type non-toxic materials HOT. Add it to your wishlist! www.wish.com/c/59cf265486ac5b1d3970abbd

[@CandiceErika]

Little Windows makes a great coming resin that is a bit cheaper then ice resin, but it is not an Amazon item.

[@roseanndelangel7856]

What is pimm spray

[@mariab.1997]

I think she called it PYM, Preserve Your Memories. A spray coating to prevent an interaction with the base metal on your skin, it seems.

[@debbiepowell9947]

Can you finish these with a glass cabachon?

[@backtoearthcreations]

You sure can! I actually prefer glass tops, but this is a nice alternative for if I run out of cabs :p

[@meknw1001]

oh my god why don't you start a series where you challenge yourself to make a piece with random things that you get sent or have lying around and then sell what you manage to create on your etsy. you could get your subs to give you ideas for items to use (interaction) it would be entertaining (growing your youtube and diversifying) and you'd make money on the final peice. just an idea!

[@Toonpish]

can you make dragon eyes with those?? bet they would be awsum :0)

[@valsummers5330]

Cool idea Not on topic Imbali wire craft Make a 4 wire base Stacked points with one wrap between each set of points No smooshing Pull out top two or three wires Tap them down Not so instant gallery wire for setting stones!!!

[@eveny119]

FYI :You sell for $ 5., Esty has for $ 27.

[@cyhomer]

Not supposed to shake these!

[@nimueladyofthelake]

Don't know how much that paint costs but you can do the exact same thing with cheap craft acrylic paint doing a dirty pour on a silicone baking sheet or the white paper that you buy at the market to put in a baking pan. It is called a "skin" and you can find tons of examples on youtube. You would end up with a whole sheet of skin that you could cut to size. If you want cells, add some silicone from the 99 cent store. You would have to gently remove the silicone after it dries using acetone, soap and water or alcohol on a qtip. Be careful if you use alcohol because it dissolves acrylic paint.

[@sorcierenblk3000]

Randy farted!!!!!

[@maztravis3303]

Hey I like what you do, I enjoyed learning your shit,but man, TIME LAPSE PLEASE!!! MORE TIME LAPSE!! I dont want to spend all my art time watching your video!! I want to watch, than play, not just watch an wonder for next time I get to play. That sucks.

[@backtoearthcreations]

Hey, Maz; did you know youtube has an option where you can speed up the videos yourself when viewing? www.wikihow.com/Speed-Up-KZbin-Videos For an experienced artist, a lot of the slower drawn out videos can be mind numbing, but for a beginner there may be something in there that really helps them along in what they are doing.

[@maztravis3303]

Yvonne Williams i agree, an i won't even lie, just because im seasoned, DOES NOT mean I know it all. Hence why I was watching the video to begin with. AN I DID NOT KNOW ABOUT THE SPEED UP!!! HOLY HE'LL IS THAT A GOOD IDEA!! THANK YOU VERY MUCH !!! I'M CHECKINout that link now.