DIY Powerful Bluetooth Speaker From Cooler and Old Speakers / Powerful Bass

I made a portable bluetooth speaker from a cooler and it turned out to be very powerful
#diy #speaker #subwoofer #bluetoothspeaker #portablespeaker #bass
music: • Different Heaven - Saf...
music: • Warriyo - Mortals (fea...
music: • EXTREME NoCopyright BA...

[@STMENTNETWORK]

Some insulation on the inside would have it booming even better but obviously it’s not needed

[@marvinchea7108]

How you get a hole saw that big

[@michaelmcling6482]

I’m in the process of doing one with the same radio not sure what I’m doing wrong but no sound is coming out

[@michaelmcling6482]

I’m in the process of doing one with the same radio not sure what I’m doing wrong but no sound is coming out 2:54

[@frankygarces8164]

How long does the battery last? Just recharge once it's dead? Are the bottoms subs?

[@floatinggears7515]

It all depends on how loud the volume is set, but on like 70% it lasts about 7-8 hours They’re just regular speakers but you get pretty good low frequency there.

[@Len_M.]

@@floatinggears7515 I have a 12v power supply for RC Battery Chargers. Could I put a Lithium Car battery or an AGM Car Battery and have the 12V power Supply running to the Battery and then the Battery running to the Amp(s) I’m planning on using? I was going to do one Car Battery then a 100x4 and a 200x2, hook the Mids and Tweets active off my Pioneer DEH-7200BT, and DEQ-9200. 1 or 2 sets of Mids and Bullet Tweeters and a 6.5 or 8 inch Midbass or Sub set it up so the Mids/Tweeters are in one chamber and the Midbass or Sub in it’s own ported Chamber.

[@Markanthony51786]

Wish he would’ve went over the wiring process in detail

[@jorgegarcia1278]

Same thing I was thinking

[@ernestcole1309]

He just connected each speaker wire from the head unit to each speaker. Wired red & yellow together then connected positive to battery to those. Then the black on the head unit goes to the negative on the battery. He added a quick connector to the battery positive and negative to be able to recharge. Kind of simple.

[@ElJulio931]

@@ernestcole1309 am using a amp with mine how do connect radio

[@griffinfrench2319]

What’s the purpose of the pvc pipes?

[@floatinggears7515]

The pvc pipe increases acoustic output of the low frequency range. I had to make it as if it is longer than a straight ducted port, which is very useful for use in compact systems when port length is often restricted.

[@theminiartgallery]

😱😱😱😱😱😱😯😯😯

[@centralvalley-6615]

He'll yes goodjob

[@floatinggears7515]

Thank you!

[@michaelmcling6482]

I’m in the process of doing one with the same radio not sure what I’m doing wrong but no sound is coming out