DIY POWERFUL inverter for every need

[@Conservator.]

This is not only a cool project but it also explains how power supplies of large car audio amplifiers work. Thank you!

[@marlonbayaras2850]

already making my own symmetrical boost psu, i recommend having a common mode filter choke before the output capacitor, since there is no feedback connection at the negative rail, the common mode choke will help by pulling down the positive output at bit under load

[@f.a3202]

how can i make a common mode filter choke? sorry but I'm not very advanced in electronics. also for rectifier, can i use a full bridge?

[@marlonbayaras2850]

@@f.a3202 make a choke with 2 identical windings, each will be in series with the rail voltage but the negative side will have an opposite in/out from the positive rail, this is actually done on some generic atx psu for -12v rail

[@f.a3202]

@@marlonbayaras2850 ok but what value do i need to make them. i mean inductance?

[@мр.Олександр]

Сразу лайк! Можно не только в электронике разобраться, но ещё и английский прокачать)

[@wiremindelectronicsolution512]

My Favorite Chanel on KZbin. You have helped my career in electronics so much. Thanks. Keep it coming. I'm learning n making the designs too

[@stevetobias4890]

Wow I have been looking for a nice power supply that can be used as a Bench top variable supply, swap the trimmers for linear pots and I might have found it. Will check out your files, thank you.

[@bakupcpu]

That's what I call a power supply! I do have those IC in my parts bin maybe I'll attempt this. Thanks for sharing! Cheers!

[@sabarigirishunnikrishnan6680]

eagerly waiting for second part

[@electronic7979]

Excellent project 👍

[@samsonmbbanda6564]

This project sound awesome can it be used to power laptops.

[@мр.Олександр]

Отличная работа! Жаль краска подгорела( но все равно супер!

[@chrisv-l3835]

I would love to have a better look at the circuit diagram. The link doesnt work for me?

[@Laurus16]

Can you make high voltage joule thief that can light led bulb with driver, example GE LED BULB 3W - 5W 220V, firefly bulb. Etc. Using 3.7v to 220v. Please make one.

[@pdrg]

Huge fan of your work

[@KasyanTV]

thanks a lot

[@Royd20]

@@KasyanTV Your content is great, i have seen many videos on your channel but what is the use since you don't provide a schematic file in pdf or (gerber file factory pcb print) to print it on cooper clad, we need the pcb lines or schematic lines on a A4 size paper, to print on Toner transfer paper then to cooper clad I hope you understand what i am trying to say and you will provide file it in video description

[@shadadalhaj7576]

Hi again what about video how to change voltage of adapter or charger 19 to 5 or 6 any

[@shadadalhaj7576]

Hi my friend can make video about dimmer 220v 2000w or 1000w that's what they show but can that turn 220 to 110

[@andersg4]

How can it be that the core does not get saturated due to unbalanced currents in the different windings?

[@josepharamide3640]

IS AC VOLTAGE NEEDED FOR THE CIRCUIT FOR THE CIRCUIT IN CONJUNCTION WITH THE 12 VOLTS.

[@nikhilrami]

I have subscribed your channel and enjoy watching and learning more. I want to know that is it possible to make 1kw inverter using the ic used in this project? Thankyou very much. Waiting for second part eagerly.

[@vladajovanovic229]

GND on the output must be connected to input minus pol...

[@mamoynas]

is Rx (the sense resistor) at the correct place on the schematic ?

[@SKElectronics]

where is second part?

[@pierredashman85]

Great job!!! thank you so much.

[@kirknelson156]

good project, seem well thought out :)

[@krunalwandhare1446]

Why does pcb look burnt type black color?

[@pingpong9656]

This is so powerful, they do their cooking on it.

[@krunalwandhare1446]

@@pingpong9656 😅

[@bisnetodeportugues]

Make inverter With Feed Back Pure Sine. Thank You From Brazil.

[@16phoenixlast]

How can be same converter be made without changing DC to ac ! I hope there would be minimum loss in DC to DC converter rather than DC - AC - DC converter

[@Basement-Science]

It is not possible to convert voltage efficiently without converting to some type of AC. Converting between AC and DC is not what causes losses by itself. Rather, the way in which you do this determines the efficiency.

[@kyoudaiken]

@@Basement-Science Switching DC to DC converters convert it to pulsed DC. Not AC.

[@seazilialiabond5740]

plz make a crkt of 12volt 2amps-4amps smps power supply for using as input for buck/boost converter with diagram,mam plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.

[@stephanc7192]

Great project

[@larkanasolar8297]

DC to ac inverter please

[@abahoub]

Hi i wanna know what should i do to learn these things (power electronics ) references

[@keithking1985]

theres a channel called "simply put" check it out!! learn the basics.. power is just a term!! a circuit works the same either way. if you want more power use beefier components and thicker wires and more current/voltage. put the videos on the basics in your favorites and watch the back until you understand them. i started a just over a year ago and never looked back and can already build a circuit like this and most importantly understand it.. get books like electronics for dummies and electronics for beginners. & a word of warning dont get "the art of electronics" JUST YET, coz it's very advanced & could scare you off making you think you in over your head. give it time, you will know your making progress when you look at your favorites and say i dont need this video no more because i know this stuff now!! hope this helps you & i expect to see you commenting in a year giving another beginner advise on their circuit problems... peace out!!

[@keithking1985]

Just one more thing Abanoub check out a channel called "ALL ABOUT ELECTRONICS" it has everything for beginning in electronics. He has 2 channels his main one with the red & black logo.. & his quiz channel with the orange & black logo (which you would like to) which gives you problem & then follows up with the answer & explains the circuit.. good luck.. check him out...👍

[@abahoub]

keith king thx for your reply and i’m an electrical power engineer but majored in sth else (not electronics) so I won’t start from scratch. Thank you again for ur reply

[@keithking1985]

I JUST LOVE THOSE CYLINDER DIODES!!! WHAT ARE THEY CALLED AND WHAT IS THEIR POWER RATING??? BEST CHANNEL FOR PROJECTS ON KZbin HANDS DOWN.. }B=( >

[@djtransnazgrz]

If you pause you can read it. KD2997A they can handle 30A.

[@Lifeofelectronic]

Good

[@f.a3202]

isn't it easier to make it with the tl494 oscillator?

[@KasyanTV]

Not! on sg3525 it is very simple to build protection and soft start, and it also has a powerful output stage, unlike TL494

[@f.a3202]

@@KasyanTV oh ok. by the way I have made this circuit with the tl494 but with a smaller toroidal transformer for 100W of power and it only outputs about 5W. what's the problem?

[@canari.satiné]

very good thanks

[@charlesmonty]

🤝👌👌👌👌👌

[@kyoudaiken]

I still don't understand why he doesn't use JLCPCB himself.

[@KasyanTV]

we order boards from jlc, but rarely. Because I spend no more than a week on creating projects, I prefer to make a fee myself, since there is no time to wait for delivery

[@kyoudaiken]

@@KasyanTV Ah I see. Thanks for clarification! I used JLC once, but customs are too expensive in Germany. :/ So I went for AISLER Europe.