DIY RADIUS ARMS BUSHES REPLACEMENT | Superpro & Polybush | Land Rover Defender | Maintenance series

  Рет қаралды 19,415

Off-Track Family

Off-Track Family

Күн бұрын

Пікірлер: 31
@cyrilmasse7930
@cyrilmasse7930 5 ай бұрын
Merci pour les conseils
@gregoiremalod9619
@gregoiremalod9619 Жыл бұрын
Je me prépare a faire cette modif aussi sur un 110 TD4, merci pour votre vidéo.
@offtrackfamily
@offtrackfamily Жыл бұрын
Avec plaisir 👍
@MartinGotz-jm8pd
@MartinGotz-jm8pd 2 ай бұрын
do you have a lift kit ?
@bentomario8996
@bentomario8996 4 жыл бұрын
Je suis en train de faire exactement la même chose! C’est une bonne aide votre video 👍👍👍
@offtrackfamily
@offtrackfamily 4 жыл бұрын
Merci pour votre commentaire. En espérant que ça puisse vous aider. N'hésitez pas à aller voir nos autres vidéos et à les partager si elles vous plaisent. Si vous avez des questions on y répond volontiers!
@kabaottoemulsion1869
@kabaottoemulsion1869 3 жыл бұрын
Than kyou so much for showing us how to remove radius arm! I was thinking to lift car and lift suspension as well. It is same thing! Now I am confident to replace those bushes! Mine is I can see perished! I noticed your one has standard type bushes not the one off center ones. I am sure your suspension is lifted slightly? No need for off centre ones??? Thanks
@offtrackfamily
@offtrackfamily 3 жыл бұрын
Thanks for your message! We replaced the stock radius arms for ones with 3° correction so no need special bushes.
@Mr_Reaper
@Mr_Reaper 2 жыл бұрын
Thank you for a very informative Video - Just about to embark on this with my Defender
@offtrackfamily
@offtrackfamily 2 жыл бұрын
Happy if it helps :)
@mustafaturkoglu1407
@mustafaturkoglu1407 10 ай бұрын
Je suis sur le point de remplacer mes silent bloc de tirant de pont en qualité d'origine Britpart Le model que toi tu a installé est bien différant du modèle caoutchoucs ??
@johndiaz7240
@johndiaz7240 4 жыл бұрын
Good job , you answered my question about premature wear of poly bushes using correct grease . Is the black grease anti-seize ?
@offtrackfamily
@offtrackfamily 4 жыл бұрын
Yes the black grease is graphite grease and only added on metallic parts that will be in contact with other metallic parts to avoid rust & seizure as much as possible.
@grahamwest1079
@grahamwest1079 3 жыл бұрын
Doing the super pro bush upgrade and fitting Adrenalin4x4 arms (today doing rears) I am just waiting for courier to deliver rear radius arm to axle, super pro kit. So watched your video while I wait. The rear arms were replaced last year so job is going smoothly. fronts have never been changed so going to allow a couple of days for that job latter in the week.
@EWOverland
@EWOverland 4 жыл бұрын
Very Interesting video, well done, thanks
@offtrackfamily
@offtrackfamily 4 жыл бұрын
Thanks to you for watching!
@lucasspiros
@lucasspiros 4 жыл бұрын
Good job 😁👍tks.
@offtrackfamily
@offtrackfamily 4 жыл бұрын
Thanks! You are welcome!
@lucasspiros
@lucasspiros 4 жыл бұрын
@@offtrackfamily 😁 apreciatte tks👍
@mattsmith2051
@mattsmith2051 3 жыл бұрын
How often should you replace the super pro poly bushes?
@offtrackfamily
@offtrackfamily 3 жыл бұрын
As this is our first time using the super pro & had them on only for about a year, I can't say how long they will do properly the job. This will also depend on many factors (vehicle, use of the vehicle, etc.)
@1dirksen
@1dirksen 4 жыл бұрын
I like the mood of your maintenance videos. Can you name the "black grease"? Thx in advance 😀
@offtrackfamily
@offtrackfamily 4 жыл бұрын
Thanks! We were using graphite grease but you can use propshft grease if you don't have it.
@oczhaal
@oczhaal 2 жыл бұрын
@@offtrackfamily Est-ce que la graisse graphitée ne va pas user prématurément les pièces en polyuréthane?
@defender90keswick.nigelsla59
@defender90keswick.nigelsla59 3 жыл бұрын
I have just bought the full set from Gwyn Lewis and will be fitting them on my channel. I will use a press, but have taken a screen grab of your threaded bar and washers fitting the front radius arm bushings to use when I make my video if that's OK with you? You will get a shout out!!
@offtrackfamily
@offtrackfamily 3 жыл бұрын
Great! Sure, thanks! :)
@lifes.projects
@lifes.projects 4 жыл бұрын
Good job. Superpro bushes are on the long list on my 110 Puma 🤣 Out of interest what brand was the polly bushes did you replaced? And what lift kit are you running? Thanks
@offtrackfamily
@offtrackfamily 4 жыл бұрын
Thanks for your comment. We have a +2 inch lift kit & a detailed vid on our suspension is planned, so stay tuned ;) The red bushes are from the Polybush red kit, we give more info in our previous episode. At this time, we are happy with those Superpro bushes & no more steering wobble for us.
@oczhaal
@oczhaal 2 жыл бұрын
@10:41 it seems that you forgot to place the long bushing on the arm's head???
@offtrackfamily
@offtrackfamily 2 жыл бұрын
Seems we would have noticed if something was forgotten
@oczhaal
@oczhaal 2 жыл бұрын
@@offtrackfamily i guess, but on the video, it's not obvious
Polyurethane Bushes vs Rubber Bushes - My Thoughts
10:33
MadMatt 4WD
Рет қаралды 140 М.
How to have fun with a child 🤣 Food wrap frame! #shorts
0:21
BadaBOOM!
Рет қаралды 17 МЛН
Вопрос Ребром - Джиган
43:52
Gazgolder
Рет қаралды 3,8 МЛН
DIY Defender Radius Arm Bushes. Show Not Tell.
12:21
Infinity Mind DIY
Рет қаралды 14 М.
Replacing Radius Arm Bushes for OEM (Not Poly bushes) - Defender RRC and Discovery 1.
8:24
Trailerfitter's Toolbox Videos
Рет қаралды 68 М.
Removing a stubborn rear A frame, and some tool information!
20:20
Britannica Restorations Ltd
Рет қаралды 13 М.
SuperPro Bushings on Land Rover Defender (2nd set for our 4x4)
6:02
Off-Track Family
Рет қаралды 3,9 М.
HOW TO FIT A +2" SUSPENSION LIFT KIT! - LAND ROVER DEFENDER 110
24:21
Castor Correction - What is it and how can castor be corrected?
10:31
How to have fun with a child 🤣 Food wrap frame! #shorts
0:21
BadaBOOM!
Рет қаралды 17 МЛН