Рет қаралды 49,203
Here is how I made a Recording Vocal Booth for Under $100!
(Apologies for the wonky audio. There are detailed instructions below so you don't miss anything!)
_________
For cutting the PVC, you will need a hacksaw, seven 10ft PVC pipes, measuring tape, a pencil/marker, and a mask.
Wear your mask to prevent from inhaling the PVC dust, and take two of the 10ft poles, measure to 5ft (in half), and cut.
Take the rest of the poles, measure 4ft, and then cut another 4ft out of the excess (out of each of these five 10ft poles, you will get two 4ft poles and one 2ft pole).
You should end up with four 5ft poles, ten 4ft poles, and four 2ft poles.
Here are the rest of the supplies:
10 ft PVC Pipes: www.lowes.com/...
Elbow PVC Fittings: www.lowes.com/...
Tee PVC Fittings: www.lowes.com/...
Acoustic Foam: www.amazon.com...
Moving Blankets: www.amazon.com...
Now you are ready to assemble!
Don't forget to like and subscribe!
Connect with me on Insta!
/ caseytylercreative
Become a Patron!
/ caseytyler