DIY - Replacing Garbage Disposal (InSinkErator, Badger 5, 1/2 HP)

This is video on how to replace your garbage disposal, more specifically the inSinkErator Badger 5, 1/2 HP Garbage Disposal. Your kitchen garbage disposal will eventually stop working and need replacing so why hire a plumber to replace it when you can do it pretty easily and quickly?
Definitely read the instructions and if you don't have the time or aren't confident in your abilities then definitely hire a professional. I just happened to have replace a few of these before and this was what I did and how it went for me.
What you'll need:
Exact drop in replacement garbage disposal: InSinkErator Badger 5 Model 5-87A (We bought the unit in the video from Amazon because included the electrical cord)
Flat Head Screwdriver
Labor - about 30 mins

[@segredosdotiosam9989]

Please do it the right way. First , you need the lock the bracket or the whole thing will fall out with vibration one day. Second, The parts you called not needed at 0:29 are actually key to having a proper job completed and eliminating future leaks. There is a fiberglass seal and the putty between the sink and that sink flange that needs to be replaced as they get brittle. I would also use the new retainer ring for good measure. Here is a video for a better job kzbin.info/www/bejne/op7YlItvfM6dos0

[@bensaysthings]

Good tips. The linked video does do a more complete job. Pinning to the top of the comments.

[@tedpham4138]

I managed to replace my leaking garbage disposal Badger 5 with Badger 500 after watching this video. Thank you. The old one lasted over 20 years. I think I got my money's worth.

[@bensaysthings]

Glad this video helped! 20 year run on a garbage disposal is pretty awesome. Sounds like you don't abuse your stuff or at least maintain it well with thorough rinses.

[@dothedewinme]

This video saved my marriage

[@bensaysthings]

Wow.....ummm......you're welcome?

[@fluffy_manul_]

😂😂😂

[@lisawood3919]

The Allen Key trick saved us!! We tried everything. Yours was the only video that mentioned using the wrench. It worked and our disposal is working just fine. Again thanks for saving us from spending money on a plumber or buying a new disposal.

[@bensaysthings]

Glad the video was helpful!

[@ashsrevnge]

Same here. I just ordered a new disposal and while waiting for them to let me know it was ready to be picked up, I pulled up this video to see how to install it. I saw the allen wrech bit, tried it myself, and my current disposal works again after a month of me thinking I needed a new one. I canceled the order and saved myself $120. Thanks a bunch.

[@amycurrie5543]

@@ashsrevnge wonderful!! I just had same experience... no need for the $145 replacement yet!!

[@silentjuan1]

Same for me! Thank you so much. Now I can go play golf.

[@wittstruck1]

​@@bensaysthings 11:54

[@jonpeterson426]

I called my plumber and too busy this Christmas holiday week. So…….I. bought a new Insinkerator, didn’t open box, started to watch video and remembered seeing wrench way back in my work bench. Never knew what it was for? Tried it and Voila! I am now an apprentice plumber!! Mucho gracias Amigo!!!

[@bensaysthings]

That's great! I'm glad you were able to break the disposal loose without having to replace the whole unit. Saves $$$ and gives you confidence that this plumbing thing isn't always a mystery.

[@marlonanthony7668]

Your "helpful tip" just saved me $700. God bless you 🙏🏽 ❤️

[@bensaysthings]

Glad the video helped and you were able to save some money!

[@georgemamerow6042]

Very, very well done. The tip near the beginning of the video regarding unbinding the old disposal saved me a lot of grief. I had already procured a new unit that I'll just keep and use when the old eventually does fail. Thanks, Ben.

[@bensaysthings]

Glad the video helped. Good idea keeping the new one since the disposal will eventually fail and you'll save yourself a trip.

[@eddrummerguy5476]

Thanks for getting back. I got it off. Appreciate your video.

[@kevinfigueroa8286]

I cannot believe this.. I was so prepared to buy a new garbage disposal until you showed me the key trick so I tried one of the many keys I have and it now works amazingly! Thank you so much for saving me money!

[@bensaysthings]

Glad I could help!

[@rachelmaxwell4038]

Thank you so much for taking time to make this video. This saved me over three hundred dollars. I bought the replacement disposal on Amazon and installed it myself thanks to you! KZbin should have a link where viewers can leave monetary gifts for people who create these types of videos.

[@bensaysthings]

You're welcome! Glad you were able to knock this project out.

[@komadventure3633]

Hello what’s model came the cord, mine just broke

[@bensaysthings]

You can probably find the replacement for your disposal on Amazon. This is the one we got: www.amazon.com/InSinkErator-Badger-Waste-Disposer-Power/dp/B01IS234DG I couldn't find the model with the cord already installed, but looks like this one has the cord kit that you can attach yourself. It includes instructions. Hope this helps.

[@saffron4441]

Thank you so much for this video!! I am a single mom and never thought I would try doing something like this, but your video was very helpful and easy to understand and motivated me..especially when you said, "Then it's Miller time!" Lol 😂👍 I was like, ok... Let's do this!!

[@bensaysthings]

Cool! Glad it was helpful and you had the confidence to tackle this!

[@29moons]

Thank you very much. I purchased a new one on Amazon yesterday, received it today and installed it in 10 minutes. Done.

[@bensaysthings]

That's awesome! Glad the replacement went smoothly!

[@tonybaucom3214]

Good video. The gentleman mentioned to use the new parts that came with the new unit but didn't replace the part that goes in the sink. Yes, it's a little more work and a bit more complicated, but it might be a good idea to have a nice new part in the sink.

[@madhurianantha5458]

You saved us 200$. We were able to replace ours using this video. Thank you 🙏

[@bensaysthings]

Glad the video helped! Yeah, plumbers/handymen can charge an arm and a leg.

[@luminol67]

9:27 I feel that anyone using “Miller Time” 🍺 confidently for a job well done, deserves my thumbs up. Great video. Thanks!

[@bensaysthings]

Glad the video helped!

[@enriquerangel3750]

I bought a new one in Amazon... I called a tech to installed and he told me it was going to be $150.00 Just to install. I said forget It. I took the old one out, cleaned it and I found it had a piece of bone inside. With your video I fixed it and save a lot of money... Thanks

[@bensaysthings]

That's great! $150 back in your pocket!

[@franklobo2579]

Thanks for your English video:)) I'm pretty good with repairs but I need a refresher for certain items but you run into the All American mechanic that says phrases that leaves you just scratching your head. This was easy and simple. I'm glad to see several single moms who found this useful too.

[@bensaysthings]

Glad the video was helpful. Yeah, I try to use the right terms when I can, but I mainly just want to get the point across on what to do. I've been helped by a lot of other KZbinrs for various repairs and I do appreciate the ones that just keep things straightforward in "English" for a layman like me.

[@DheerajAkula]

I thought I had to replace my Badger 5. The helpful tip you had in the top of your video to use the Alan wrench to move the blades helped me get my old one to be working again! Thanks for putting

[@bensaysthings]

Glad it helped!

[@andrewmyer9804]

Thanks for this video. I was about to buy a new one then I watched this video. Turned the motor with the Allen wrench and now it's running perfectly.

[@bensaysthings]

Cool! Glad the video helped!

[@adamwilliams3300]

The Allen wrench tidbit saved me a lot of time and money. Thanks!

[@bensaysthings]

Great to hear!

[@sailorjerry4435]

Thanks for the video Ben Lin, I just replaced mine and forgot that one crucial and that's busting out that little disk where the excess pipe connects, but after watching this video, realized my mistake and now everything is running fine. Thanks again.

[@bensaysthings]

Glad your disposal is up and running!

[@cherylwinthrop2883]

This video is SO well done! Thank you so much for making it so "basic" and simple. The tips you gave are worth their weight in gold! Finding your videos was a Godsend! Thank you!!

[@bensaysthings]

Glad it was helpful!

[@aleksdude]

@@bensaysthings If I recall.. The guy who he replaced his garbage disposal gave him $100 to buy some beer.

[@bensaysthings]

@@aleksdude As I recall, you recall correctly. I also recall the beer fund was probably funneled to various junk/fast food purchases.

[@justinhealy5610]

Awesome Video! Really helped out, and made for a quick replacement installation. Thank you!

[@bensaysthings]

Glad it helped!

[@donpaquette4969]

Excellent instructional video

[@bensaysthings]

Glad it was helpful!

[@elgato6457]

Great video, helped me swap my badger. You can pretty much follow him step for step. Pay attention at the end regarding the order of tighening things. For detaching and reattaching the power cord , refer to the intructions they are pretty clear.

[@bensaysthings]

Glad the video helped!

[@MKristen702]

I love how you call all the plumbing parts “this guy”. “So this guy comes right out….” 😂 Thanks for the video, I may cancel my plumber!

[@bensaysthings]

Yeah, I'm not very professional, but hopefully the point gets across.

[@janiqwacorley8797]

Hey you rock. I just changed mine out thanks to you and saved some money in doing so. You are awesome 🎉❤

[@bensaysthings]

That's great! Glad the video helped!

[@kathrinasmith9030]

Thanks for this video, I was able to fix my inSinkErator with the allen wrench trick., no need to buy another one!

[@scratch90]

Man you guys doing a lot of home repair. Props on recording it.

[@bensaysthings]

I figure I learned alot on KZbin on repairing various things, but rarely exactly my situation/setup so hopefully now that I've made a video someone else with my exact setup or issue will benefit.

[@scratch90]

@@bensaysthings Giving back. The gift of giving. Well Glad you do. I never record any of the stuff I have repaired. I gotta say the Disposal hasn't changed in design. That's good for parts, replacing, or maintenance.

[@afrtsfan]

Super helpful. Thanks so much!

[@bensaysthings]

Glad it was helpful!

[@johntoyou]

Great video, very clear explanation of the whole process!

[@bensaysthings]

Glad it helped!

[@stevewinter8928]

Tips for a better video . Don't film in a shadow where people really can't see what you're doing and 2 don't skip over stuff you do this and then blank skip the film ahead

[@clarkconway8796]

Great explanation! Thanks

[@bensaysthings]

Glad it was helpful!

[@godscommandmentsaretruthis2837]

0:44... you just saved the day! We were going to replace the garbage disposal and I was watching this video to see how to do it. Then when I saw that the disposal can get stuck sometimes, I found an Allen wrench, got it to move like you showed in the video, then realized something was stuck inside. Turned out to be a really hard nut from a date my 15 year old admitted to spitting into the sink. Finally got it out and it's running great. Many thanks!

[@bensaysthings]

Cool! Yeah the Allen key at the bottom seems to help resolve many stuck disposal issue.

[@augustwo]

Subscribed. I am about to tackle this job. I'm a novice DIY'er but my girlfriend may never know thanks to you! ha. looking forward to "miller time" Thank you

[@bensaysthings]

Thanks! Good luck with the install. You can do it!

[@jamieparsons8129]

Thank you, for the pointers at the beginning!!!

[@bensaysthings]

Glad the video was helpful.

[@joe-qw3id]

great instruction video for the category. thanks and keep it up

[@robbysun3137]

Great video! It saved me lots of wasted work as I almost forgot to remove the small plastic cap in the dish washer inlet. Don't understand why the cap is there at the first place.

[@bensaysthings]

No problem! Glad the video was helpful. I think the extra cap in there is for kitchens or maybe RV mini kitchens that don't have dishwashers to even hook a hose up to that opening.

[@MissSky13]

Thank you so much!! This really helped my mom and I

[@bensaysthings]

Glad the video helped!

[@jerrylarson5135]

I came here to see what pain this was going to be....and you just saved me $80! 1/4 inch Allen wrench (7mm) did the trick! One turn freed it up. Great reminder!

[@bensaysthings]

Glad the allen wrench twisting worked!

[@aleksdude]

Ben fixed this for me and made this video. Great video considering he was just doing it as a favor.

[@edwardmarcot464]

Excellent video! Thanks so much!

[@bensaysthings]

Glad it helped!

[@filmlikefilms]

Thank you for the easy to follow video.

[@bensaysthings]

Glad it helped!

[@richardpineda1364]

Thank you that’s all need to know how to punch out the plastic piece. Yesterday I replaced the disposal I forgot to punch plastic piece out thank you for information.

[@bensaysthings]

Glad I could help!

[@acmejava]

Thanks for the tutorial. That "excess" tube is actually the dishwasher drain and you are absolutely supposed to lock the mounting bracket into place to keep the bracket from vibrating out of position and dropping the disposal. I would replace the sink drain flange too. Just to make sure that the putty is fresh and there is not corrosion or rust on any of the parts.

[@bensaysthings]

Thanks for sharing some info. Yeah, I wasn't very clear on that dishwasher drain tube explanation in the video.

[@segredosdotiosam9989]

exactly, the putty and the fiberglass joint get brittle.

[@tommclain8893]

very helpful made DIY easy. Thanks!!!!

[@bensaysthings]

Glad it was helpful!

[@miriamlandau1207]

Thank you!! 😊

[@bensaysthings]

Glad the video helped!

[@davidhopkins5451]

AWESOME. Thank you!

[@bensaysthings]

Glad the video helped!

[@mikecarlton4187]

thanks much very helpful.

[@bensaysthings]

You're welcome!

[@gamagoat6758]

Good video

[@bensaysthings]

Thanks, hope it was helpful.

[@rudymartinez509]

Fuck yeah bro thank you. I just turned it with an Allen wrench and it spun again. Thank you sir.

[@bensaysthings]

Glad the video helped. Seems like the allen wrench trick helps a lot of people. Maybe there should be a 30 second video just on that.

[@hungryforsomepancakes]

Thank You

[@bensaysthings]

You're welcome

[@jamesd.2856]

Very nice. I just commented on another video about the distracting music and just banners explaining what to do. It was a hot mess. Yours was so detailed I feel like I should be good to go. Thank you.

[@bensaysthings]

Cool, thanks! Good luck with the DIY, you got this!

[@jamesd.2856]

@@bensaysthings Update! I sent my son a link to your video last night, he came by this morning and it took him all of 15 minutes with the help of your video. Thanks for the help!

[@bensaysthings]

@@jamesd.2856 that's awesome! 15mins is pretty lean and efficient!

[@knickovthyme]

@@bensaysthings thanks, he is some kind of Engineer that works with Laser’s but he had never done a disposal. The video was instrumental in his proficiency.

[@brianvirnelson1668]

Good video. I wanted to make a video myself, but I have anger management issues. The last time I replaced the disposal, it ended up being a full kitchen demo…

[@bensaysthings]

Glad you liked the video. Man, disposal to full kitchen demo reminds me of this one scene from Malcolm in the Middle. kzbin.info/www/bejne/d5O2lpuZiZZsq5I

[@mikeroy6713]

I’ll be replacing my garbage disposal and your video will be most helpful, thanks! One question. Do I have to buy the exact same unit I’m replacing in order for everything to fit?

[@bensaysthings]

I'm not sure if you need the exact same unit. You'll have to dind out the port location to be sure. I just picked the same model to be sure it would be a straight replacement. Good luck!

[@aleksdude]

Hey!!! That's my under kitchen sink!

[@emiller9426]

I just finished replacing my Badger 5. All went well except when I went to run my dishwasher I realized I forgot to knock out the dishwasher drain plug in the disposal. I'm wondering, rather than disassembling everything and removing the disposal to knock the plug out, can I just drill it out in place? I do have enough clearance in my cabinet to line the drill up, and I can drill slowly and hold a vacuum cleaner hose nearby to suck up plastic debris as I'm drilling. So if a small amount of drilled material gets in the disposal chamber will that hurt anything?

[@bensaysthings]

I think this would work and any small amount of drilled plastic shouldn't hurt the disposal. Just run it and flush water through it afterwards. However if you can get someone to hold the disposal steady maybe you can still knock out the plug with a screw driver and hammer. I think this will ensure the entire plug is removed as opposed to drilling since when you drill you're risking a jagged or rough inner lip where the plug used to be. That rough inner lip might allow debris to accumulate and catch from the dishwasher.

[@thefixerer]

The thing you bust out must be there for drains that do not need a dishwasher line attached. Probably pertinent info, don't just bust it out because it's there, it has a purpose.

[@everleebloom2256]

This is great. Going to be trying this tomorrow based on your instruction once the part shows up. Question; My current instruction manual as well as other videos site opening the electrical plate on the unit and joining the (4?) wires within with Wire Nuts? Is this necessary? It looks like you were able to bypass this step. Mine is also coming with the Electrical Cord already attached, so, I hope not?

[@bensaysthings]

The garbage disposal can be purchased with or without the cord already installed. Since yours is coming with the electrical cord already attached you don't need to open up the electrical plate. You just swap out your old disposal with the new one. Good Luck!

[@everleebloom2256]

@@bensaysthings That's great, now I understand that step is for units without a cord. Got it! :)

[@everleebloom2256]

Got it done. Thanks so much for the clear and easy to understand instructions!

[@mymomsrecipebox]

Do I follow these steps if I have a dishwasher to connect? This will be my first home improvement project and I am terrified!

[@bensaysthings]

The hose for the dishwasher should connect to that one port on the side of the garbage disposal. The port where I break the plastic cover around minute 3:25. If you're not sure you can also watch a few other youtube videos. There are others who probably do a better job explaining than I did. Good luck! You can do this!

[@chemitasteinmommyposted4059]

Hi there! Question: For electric purposes: Is replacing the disposal as easy as plugging in an out of the outlet... I’ve seen videos where the breaker box is involved.

[@bensaysthings]

If you unplug the garbage disposal power cord from the outlet before working on it (ie remove old, install new) then there should be no electrical power and you should be safe. Shutting off the power to the circuit break that's associated to the outlet wall is a bit overkill.

[@chemitasteinmommyposted4059]

@@bensaysthings haha! Thank you! Appreciate your help and tutorial

[@bensaysthings]

@@chemitasteinmommyposted4059 No problem. Good luck! You can do this!

[@RKDriver]

When you purchase these disposals, they'll be offered in a corded or un-corded version. Some homes come with Romex wires that hook up directly to the disposal and you have to pre-wire it to the unit before mounting it. The corded units obviously have the cord installed at the factory which can be plugged into a wall outlet like this video. It's something you should check before purchasing one. If you're wiring one directly to the home's electrical, you have to shut the power off at the electrical panel.

[@guitarpikchik2710]

Do you need to shut off the water first. Also, do you need plumbers putty and pipe tape?

[@bensaysthings]

You shouldn't have to shut off the water to your faucet since you're just removing the disposal. The water supply lines shouldn't come into play at all so you don't have to mess with them. Just make sure the kitchen faucet itself isn't on and the old garbage disposal electrical cord is unplugged. With regards to plumbers putty and pipe tape, you shouldn't need these if you're just removing and installing just the disposal. Plumbers putty is needed if you're installing the new metal flange to a the sink (which I didn't need to do in the video). Pipe tape or teflon tape is typically only needed for metal threads and if your setup is all PVC plastic piping then you shouldn't need it.

[@jnf2211]

Why can I not find any that are already wired?

[@lllll9251]

Any tips if old unit is stuck. I can’t get it loose and clamps that I turn are positioned awkwardly… Next to the screws so it’s hard to get good leverage

[@bensaysthings]

Not sure how your disposal is setup, but if you can get a large screw driver or breaker bar in between maybe you can pry or break loose the sliding flange? I don't necessarily recommend this though as it could damage the flange or deform it. This might be one of those instances where calling a plumber might be a good idea.

[@lllll9251]

@@bensaysthings thanks Ben. appreciate it! was thinking too much force probably wasn't the best idea ; )

[@eddrummerguy5476]

How do you remove the electrical plate when it does not come off by the method described?

[@bensaysthings]

I'm not sure what your old disposal electrical plate looks like, but typically there are a few screws that you should be able to access. If your old disposal is sealed up and doesn't have access to remove the cord then you might need to buy a new cord kit and install it on your new disposal or you could buy a new disposal with the cord already installed. Hope this helps. If all else fails and you still need to access or remove the electrical plate I would recommend hiring a plumber.

[@4rowsofgemstones134]

Thank you and all was helpful but from woman's point of view, you have to line up the new disposal on the lower part of the slide around the edge then it slides up to the higher point. I watched several videos but still couldn't figure where to hook "the teeth" on...what spot. Ladies if you are attempting this (my husband can't get down on the floor anymore), when putting the new disposal and ready to twist you will see on the upper flange that the metal slides from a lower to a higher spot so hook in the lower place and then slide to the higher with the allen wrench. Thank God that project is done!

[@bensaysthings]

Glad the video helped! Also thanks for sharing some insight on your experience it helps everyone.

[@4rowsofgemstones134]

Thank you for helping so much!

[@donnamattox3943]

Ok just wanna say I love your video and your advice on not to tighten to much or it will really be a pain in the ASS 🤣 off to HomeDepot I go... I am so excited to start this project I know I can do it again great video even a GIRL can do THANKS!

[@bensaysthings]

Glad the video was helpful! Although you can't see, a lot of girls (and guys) are rooting you on!

[@tonyramirez840]

Did you connect to an air gap in this video ?? I have the same model and was wondering if you connect the air gap to the disposal hole and then the other side of the air gap to the dishwasher hose ?? Someone help plzzzz.

[@bensaysthings]

Yes, although not shown specifically that black hose I uninstalled from the old disposal (then reattached to the new one) with the hose clamp was coming from the air gap. There is another hose (not shown) that connects from the air gap to the dishwasher. The hose from the air gap to the dishwasher was a white hose in the video. You see it around minute 5:58 between the wall plug and the supply line knob.

[@tonyramirez840]

@@bensaysthings thanks for your help great video

[@bensaysthings]

@@tonyramirez840 glad it helped.

[@aaronb825]

wished you would have mentioned that tab you popped out is only for if you have a dishwasher to connect, if you don't have a dishwasher do not remove that tab; other tutorials videos stressed that point very strongly

[@bensaysthings]

Good point.

[@quabledistocficklepo3597]

I can't do it. What could be wrong? I can't attach the inSinkErator, because I can't even get the parts lined -up for doing that.

[@bensaysthings]

If you have the exact same model as the one you're replacing then it should install the same way. One thing I did notice when installing the new one was that you do have to push the new disposal up against the sink flange a little bit to compress the gasket just a little. However it shouldn't be a lot of force. More likely your alignment might be off? If all else fails then it might be time to call in a plumber. Good on you for giving it try though most people don't even do that.

[@quabledistocficklepo3597]

@@bensaysthings Thanks for answering so soon. (You're the first and only one so far) No, my model is not the same, but I think it should install the same way. Anyway, I'll try again. tomorrow.The parts just don't line-up the way they do on all the videos I have seen on exactly the same model. Strange.

[@bensaysthings]

@@quabledistocficklepo3597 That is strange. The diameter of the disposals should all be standard and the same especially if you're putting in a inSinkErator to replace an old inSinkErator. Hopefully it really is just a misalignment. Good luck!

[@casscass5047]

What is the small pipe above the other one for?

[@bensaysthings]

I think you're referring to the small port above the disposal outlet? If you are, that port is to connect to your dishwasher setup. More specifically your dishwasher has a relief hose that connects to an air gap (small cylinder looking thing usually located next to your kitchen faucet) and then another hose connects from the air gap to that "small pipe" on the disposal. I didn't mention it clearly in the video but if you don't have a dishwasher then don't punch out the plastic piece as I did in the video. If you already did, this isn't the end of the world as you can always seal it up with epoxy. Hope this helps.

[@chefsarahg9208]

Mine didn't come with the electrical done. Have to remove old cable to new one. Struggling

[@bensaysthings]

This video by Michael Borders shows how to install a new electrical cord. kzbin.info/www/bejne/Y5O4ZIaXZ92bl5o It's what I've done also, it just happened that the one in my video already came with the cord installed. Good Luck I believe in you Chef! Also I would recommend getting a new replacement cable from Home Depot or Lowes as I've tried extracting the old cable from the old disposal before and usually it ends up damaged.

[@genevagratts5204]

I’m new at this how do you break it loose?

[@bensaysthings]

Look around 2:22 in the video. Use the included allen wrench key by placing it into one of the loops of the existing disposal, then with one hand hold the flange above the disposal, turn counterclockwise (when viewed from the bottom). Around 6:09 I show the install so you get an idea of the moving parts. Hopefully this helps. You can do it, I believe in you.

[@MrJoeylj]

I got mine in but I got a leak from the top of the sink

[@bensaysthings]

If the leak is under the sink basin but above the disposal then it might be a misalignment of the disposal to the sink flange or the seal of the flange to the sink basin needs to be replaced.

[@ScantPear]

If it isn’t running free turn it on to free it up Lolol... that wrench is there for when the disposal is jammed

[@fatihozturk1593]

Hi,can I use play dough instead of plumber putty ?

[@bensaysthings]

I think Play doh dissolves in water. Definitely go with plumber's putty if you're replacing the drain part.

[@coryda]

also turn off the power from the electrical box too and turn the switch off for the disposal i'd imagine.

[@bensaysthings]

It's pretty safe to just turn off the switch for the disposal and unplug it. Cutting power from the breaker box is a little overkill if you're just going to uninstall the old and reinstall the new, but if you really want to be super duper safe then yes you could turn off power from the breaker box.

[@tomgreer6188]

Wall switch does not work every time

[@HoHa-td4lx]

What did you not show how it drop down?

[@bensaysthings]

Video was edited down since it was already pretty long. Go to min 6 to see the installation and the drop down of the disposal is reverse of that.

[@komadventure3633]

What’s model came with the cord?

[@bensaysthings]

You can probably find the replacement for your disposal on Amazon. This is the one we got: www.amazon.com/InSinkErator-Badger-Waste-Disposer-Power/dp/B01IS234DG I couldn't find the model with the cord already installed, but looks like this one has the cord kit that you can attach yourself. It includes instructions. Hope this helps.

[@komadventure3633]

@@bensaysthings thank u

[@DefSquadFan]

I can't get to the Allen wrench holes it's blocked by those drop down screws.

[@bensaysthings]

A quick disclaimer - I'm not a professional plumber and what I suggest might not work or perhaps make things worse. You could perhaps use a flat head screwdriver to wedge between the ring and the drop down screws to try and get the ring moving enough to get the Allen wrench into the holes. The other option might be to call a plumber or handyman.

[@DefSquadFan]

@@bensaysthings I will try option 1 and probably option 2

[@bensaysthings]

@@DefSquadFan good luck! You'll defeat this problem one way or another!

[@mrrey8937]

the breaking lose direction was missed in the video. Im having challenges with one as I write

[@bensaysthings]

To break loose the disposal it's the reverse of the steps at around minute 8. You use the allen key tool and hold the flange and turn to the left or counterclockwise when viewed from the bottom. Hope this helps.

[@tonytellingitlikeitis9951]

@4:44 - IMMEDIATELY AFTER THE LECTURE ON USING ALL NEW PARTS YOU COMPLETELY NEGLECT THAT NICE SHINY FLANGE KIT AS SOME PARTY FAVOR/ORNAMENT FOR THE SOLE PURPOSE CAMERA AESTHETICS. DON'T FORGET YOUR PLUMBERS PUTTY AND CHISEL NEXT TIME!

[@guitarpikchik2710]

Why would you need a chisel?

[@tonytellingitlikeitis9951]

​@@guitarpikchik2710 I SUPPOSE YOU COULD USE YOUR FINGERNAILS OR A GUITAR PICK IF YOU'RE GOOD ENOUGH TO PRY STAINLESS STEEL TRIM FROM ADHERED PLUMBERS PUTTY ON PORCELAIN/STAINLESS STEEL. SO GET AFTER IT! A FLATHEAD SCREWDRIVER AT LEAST IS WITHIN REASON FOR ME, HOWEVER.

[@bensaysthings]

Typically if the hardware or seals are disturbed via removal of an old part in order to replace/install a new part I would replace the seal or hardware (if available). Although the new sink flange was available from the new disposal kit the existing flange wasn't disturbed and was perfectly fine. You certainly could replace it if you wanted, but I decided it wasn't worth the trouble.

[@guitarpikchik2710]

@@tonytellingitlikeitis9951 I got it in, but I needed to replace some the pipes.

[@heatherb.4302]

Dude. U cut out the part where you dropped it?

[@bensaysthings]

Yeah, totally my bad. Others have mentioned it before also. The video was running long and I cut that portion out.

[@dangreenie5356]

OLD info. The new mounting ring does NOT spin like this video shows. Instead, it has a tab which "catches" and is supposed to enable you to spin the disposal while holding it with two hands. You have to push very hard upwards to interlock the mounting ring with the slid-up ramps on the mounting assembly. I hate it. A new video is needed to show how this is done.

[@miriamaasi9031]

Omg now it’s leaking

[@MCmotoUSA]

Why wouldn’t you show how you “break it loose”?

[@bensaysthings]

The video was already running long, but yeah, I suppose I could've put in a few more seconds to show the removal.

[@bsdetector4325]

Those plumbing parts are not guys They are hose clamps gaskets Tail pipes et cetera et cetera Amateur KZbin or 1st time installation let's video it

[@slotplayer50]

Video was informative. You should review it and really listen to yourself. You have a serious fucking problem with saying guy. This guy, that guy, those guys, it’s enough to drive a sane person crazy.

[@raywi2230]

I find this frustrating, because you say you're going to do some maneuver... and then it's magically done already and you don't actually show the maneuver! For instance, removing the old disposal. We want to see how it's done! Then, replacing the new disposal on the sink. Show us how you tighten it!

[@JayJay-du4tp]

Lol are you serious? Just turn the damn thing with the Allen wrench 😂😂😂

[@kengorder2999]

Still won’t work

[@bensaysthings]

If you installed the new disposal and it doesn't work I think it might be an electrical problem with the wall outlet. If the circuit breaker isn't tripped you could try plugging in a small appliance like an alarm clock to that socket to make sure it's working. If the socket is fine then there's a chance the new disposal you installed could be a dud (this is less likely but possible). If you installed the electrical cord yourself double check that the wiring is correct and there's no short. If all else fails it might be time to call a professional and get a plumber or handyman to take a look. Good luck. I hope it turns out to be something simple, but overlooked.

[@JakeSpeed1000]

It would have been helpful if instead of say, "Now I'll hook up this guy" he would have told us what "this guy" was.

[@samikazi3164]

Too much unnecessary talk.

[@mimimitch327]

Wow! Thank you!!! I need to replace my old badger but the last time the plumber couldn’t break the seal to the top part on the sink. I was happy you didn’t replace it either. That was the only thing that scared me. Thanks to you, 💪🏼we can do it!!! Miller time😜🫶🏼😊(that’s a Michigan statement!) thanks so much!

[@bensaysthings]

Glad the video helped! "Miller time" I always thought it was just a beer advertisement slogan. Good to know where it's actually from.