👨🏻‍🔧DIY: Replacing the front and rear wheels on a Pride Mobility Victory Sport scooter

[@BusyMEOW]

I was wondering about the rear wheels on my mum's scooter, good to know about that keyway on the trans-axle. 🙂 I'm getting her some new inflatable wheels because the ones she has now are solid and bumpy on footpaths.

[@MobilityDirect]

@BusyMEOW Thanks for watching our video and commenting! We appreciate the support.

[@purplepebblestone]

Wow!thank you. Shows how simple and easy it is. You just gotta have the right tools! This is a money saver!

[@MobilityDirect]

You bet!

[@alvindonaire9377]

Please advice on replacement wheels for PRIDE SPITFIRE SCOUT 2" x 7".Will need replacements from stock to a solid rubber for smooth ride outdoor and grips on Grass.

[@MobilityDirect]

For parts related inquiries, it's best if you call our parts department, so they can accurately answer your question. You can call them at [phone]. Also you can fill out the parts request form on this page for a quicker response: www.mobilityscootersdirect.com/parts-request Thanks for stopping by our KZbin channel! We appreciate the support.

[@karloz25]

i lost both rear wheel NUTS, where can i find replacements, or nut size? M12 and 1/2” don’t fit.

[@MobilityDirect]

@karloz25 For parts-related inquiries, it's best if you call our parts department, so they can accurately answer your question. You can call them at [phone]. Also, you can fill out the parts request form on this page for a quicker response: www.mobilityscootersdirect.com/parts-request

[@josephmirigliano8728]

Awesome 😎 can you use regular car jack too get it off the ground?

[@MobilityDirect]

Thanks for your comment!

[@Star-dk8vq]

I have a Golden companion mobility scooter and I have to replace the front wheels can I use the same method to change mine from this video.

[@MobilityDirect]

Yes, you can use this video as your reference. Thanks for watching our video and commenting! We appreciate the support.

[@Star-dk8vq]

@@MobilityDirect ty for responding. Going to help great deal. Because I don't have any extra money to have someone do it for me.

[@Blinkjojo]

I have this scooter the 2019 version. In the UK its called a Colt pride deluxe.

[@MobilityDirect]

Awesome. How do you like it?

[@NewYouYoga]

Do you have any videos about how to repair the back tail lights? Our right tail light stays on constantly (been that way since we got it), and the blinkers and brake lights don't work. I think there is a short somewhere, but I don't know how to get to that part of the scooter.

[@MobilityDirect]

Sounds like the wiring might be bad or the light assembly may be bad. Have you replaced the light assembly yet?

[@NewYouYoga]

@@MobilityDirect Thank you for responding. I haven't replaced anything yet, as the scooter came this way from the manufacturer. But, perhaps I should look into replacing the light assembly. Do you happen to do videos on that? Thanks!

[@computiacusa]

Should new grease be put on the front spindle while the wheel is off ? If yes, what is the best to use ?

[@MobilityDirect]

Not necessary. You can use some WD40 to keep it from oxidation and to keep it from squeaking, that's really all we do.

[@ToyotaandDodgeGarage]

Are there any good aftermarket wheels and tires for the pride victory lx 10?

[@MobilityDirect]

Not that we offer, we only sell OEM parts.

[@pitbikehype5281]

Where could you buy those type of wheels?

[@MobilityDirect]

You can find them on our website: www.mobilityscootersdirect.com/ or you can call our parts department: [phone]

[@pitbikehype5281]

@@MobilityDirect do you ship to Canada?

[@MobilityDirect]

No we do not.

[@pitbikehype5281]

@Peter Hicks have any links ? Are the ridiculously expensive.

[@msharpe206]

What size tool is used here please

[@MobilityDirect]

LOL!

[@ellenlee1]

if you tighten the front wheels, they don't turn. is that right?

[@MobilityDirect]

No that's not normal. Front wheels are not attached to a motor so they should spin freely. Maybe you're over tightening them.

[@ellenlee1]

@@MobilityDirect got you, it shouldn't be so tight so it won't spin. Its a type of nut that does not loosen. Thanks for the answer.

[@Snakefinger1000]

The tyre comes off the wheel in many cases so there's no real need to waste time on a video explaining how to remove the wheel and replace it. In your case one nut is all it needs? A five year old could do it without explanation.

[@MobilityDirect]

Thank you for your input, however, many viewers appreciate the video because they don't know what the process entails. You may think its a waste, but you are not the only person that uses KZbin. If you don't like it, just keep scrolling.

[@robertguzman3190]

@@MobilityDirect I m 70 and i wanted to do it myself but i didnt know how hard or easy it would be and i didnt want to have someone coming to my home to do it and charge me an arm and a leg to do it ,so any ways it looks easy so thanks for post the video . And i just ordered two front tires.

[@eemisr-t6r]

My older victory xl has the center nut and 4 more on the edge? Took center nut off but still stuck, do I need to take off edge nuts too? Or wheel is just siezed on (2014)

[@josephmirigliano8728]

Awesome 😎 can you use a regular jack too get it off the ground?

[@MobilityDirect]

Thanks for your comment!