If eventually some tiles break over the course of time and the rain pours down below over the cloth and those boards holding the cloth, the boards are eventually going to rott and the roof is going to leak. That's why in my country we put boards over the cloth along the beams and after that we put the boards horizontally to hold the tiles. This way if tiles break the rain runs below the boards and the roof is much more resistant to leaking if strong winds are pushing water beneath tiles and if some tiles break. These kinds of roofs can last a 100 years even with all the beams and boards seting and twisting over time.
@peterbrosius84383 жыл бұрын
the only good way to do it
@MrBeautrix2 жыл бұрын
True, but the issue you're describing is not as serious as that with these flexible cloths (not as serious as what happens with rigid insulation panels, for instance). As water drips on to the cloth, its weight flexes the cloth and it is able to drain beneath the horizontal strips. The method you are describing naturally allows for this, though, and is what I would call "good practice", although many construction companies will skip the vertical strips in order to save money, depending on the size of the project, especially nowadays.
@alcamto3 жыл бұрын
58 year-old guy here who watches these videos and loves the scenery, craftsmanship, and traditional methods and materials. My 19 year-old niece often watches too. She likes the craftsman. Just don’t hurt another finger Carl, she was devastated!
@dolphinliam888 Жыл бұрын
I love this project. I'm an old farm boy now. We had to build and repair all our buildings. We built one barn entirely from modifying used scaffold boards. All the same principles past down from generations. Lovely buildings, nice to see them saved. Well done!
@julianweeks3262 жыл бұрын
i had a beer for you Carl, looked like thirsty work up on that roof, im not a builder or roofer im a window cleaner but having found you videos i cant stop watching them, your brilliant mate.
@fillowtree55056 жыл бұрын
It’s relaxing to watch you work. You really do not need any commentary as your works is pretty much self explanatory . Thanks for posting.
@carlroge6 жыл бұрын
thanks for commenting
@jab3764 жыл бұрын
@@carlroge how thick is the roof wood. The one the tiles seat on?
@bobbyprivate2 жыл бұрын
5:14 made me laugh so hard. The little monkey hiding 😶🌫️ and then pounces on the tape measure. Great video btw. 👍🏻👍🏻👍🏻
@sarvpreetsinghsandhu59473 жыл бұрын
I have always want to live in these places where you live.and I could do anything for work with you in this atmosphere.GOD may bless you and your family.
@karolynevinnai51042 жыл бұрын
Nagyon ügyesek! Így kell szakmunkát végezni! Ezt tanítani kell!!!! 👍
@davidwomack59826 жыл бұрын
The amazing energy of youth!....
@wayneosullivan15493 жыл бұрын
The very last part of the video were you screwed the batting on top of the felt ? Into the wood under the felt were is the water to go If you get a broken tile and you get a leak 🤷♂️ as I don’t see a gap so you may get a build up of water at the bottom don’t you think 🤔
@kerku5 жыл бұрын
Really interesting shots, especially with the cat)
@cyrusalexander87474 жыл бұрын
If there is a leak and the water runs down underneath the tiles won't you have a problem when the water starts to pool at the second from last batten?
@gartenfreude7962 жыл бұрын
Exactly. Thats the reason, why the felt is secured in line with rafters, so that the water can run down into the gutter. The batten comes on top of that construction.
@peterbalac19154 жыл бұрын
1.15 into the video using batten stick to gauge battens, roof batten is not regularised it will be all over the place by the time you get a few courses on .Mark it with a tape and use a chalk line.
@rcarreravicente6 жыл бұрын
Nice work. Please continue sharing this project with us.
@carlroge6 жыл бұрын
Thanks! I'll do my best to :)
@james-jq8sk2 жыл бұрын
Can't believe those Gazelle choppers are still flying, we had them in Malta in the 70's with the Royal Marines...
@matholt16 жыл бұрын
Good lad! Nice and heavy eaves lining.Looked a bit green so probably some shrinkage but that will add to the character of the building. Your one of the lucky ones, a natural born Chippie!!
@carlroge6 жыл бұрын
Cheers Matt! Thanks for the positive feedback
@markchilluffo96382 жыл бұрын
You do great work ⭐️⭐️⭐️⭐️⭐️ and I think you are the only channel with zero dislikes ( knock on wood)
@tempestnz13 жыл бұрын
unmarked black helicopters are used for tracking flying saucers, keep an eye out
@fernandaramos22903 жыл бұрын
So far,so good very satisfied used it twice. Love it
@alanssnackbardailyrelaxati81556 жыл бұрын
That young fella seems very thorough. You got a new sub.
@carlroge6 жыл бұрын
thank you sir!
@MariaGarcia-yg2uw2 жыл бұрын
De qué manera podría desplomarse toda la estructura de madera del tejado ,en una sola pieza , sin desarmarse, ante un fuerte movimiento de tierra que hiciera caer los muros que la sostienen? Éste es un trabajo suyo impresionante.Enhorabuena
@mariarodriguez44493 жыл бұрын
Hi < I have always wanted to own a house in France to live in the country side on a farm and see the sites of a small town and enjoy everything it has to offer. You friends are a great help or your family which is the greatest thing in life . I would like the same one day
@Francis.Coppola2 жыл бұрын
BRAVO !!! WONDERFUL JOB
@Helloverlord6 жыл бұрын
Very strange roofing - is it typical in your area? Cause water barrier will collect water just before planked overhang as it cant go up - then it will freeze there, creating more barrier and so on...and even lowest 1"x 2" has no perforation and again water has nowhere to go again - will rot that wood for sure.
@1starshot6 жыл бұрын
That's right. They've pulled the membrane/water barrier too tight, it should sag an inch between each rafter all the way up the roof creating valleys for any water to run down under the battens if it gets past the tiles. As you say, any water will come to a full stop and collect where they have screwed the battens down onto planked overhang. Battens will rot eventually if they constantly get wet. I imagine the roof will still last a very long time though. 10 out of 10 for effort, we all make mistakes.
@carlroge6 жыл бұрын
Thanks for both of your comments, definitely interesting to get second thoughts. As for the felt, with the weight of the water it does run down in a valley. As for the last batten screwed to the overhang, we'll look into creating drain aways such as you see on canoe gunwales. We approached it from the mindset that the felt gives us time to repair any cracks or slips in the tiles. If the felt is getting consistently wet, the roof is clearly not working, so we've made sure the roof is as resilient as possible.
@winterroadspokenword46814 жыл бұрын
@@carlroge Adding to what Helloverlord said, what you really need to do if using wood planking as an overhang is make sure that the overhang wood finishes flush with the top of the rafters so the water has a clear path down. If you tacked half inch strips underneath final battens on each rafter then the water wouldnt touch the last batten and would last far longer. tile will kick out water more, but, tbh that is a common feature on old properties anyway.
@johnnythomas80364 жыл бұрын
to be fair the felt sags and stretches as you walk and work over it.
@chrishaug3 жыл бұрын
@@johnnythomas8036 yeah its done wrong. you should have the felt first, then boards going down and then boards on top of that going from side to side. and then attach the tile to the last boards. that way water that will get under the tile can run down and away. this will rot over time..thats why old roof held up, no felt that trapped water. water must drain of or evaporate, otherwise it will destroy anything over time
@guiomarpedruco56082 жыл бұрын
Why this roof is made differently?
@ateequrrahman658010 ай бұрын
What is that short and thick piece of wood called, which he attached to the end of the rafter?
@kimgaxha8143 жыл бұрын
Good work s ,thanks, I'm from Albania, very good working? .
@nleefryАй бұрын
The inside of a the kitchen please howisit going?
@MrJohnandMargie2 жыл бұрын
You should have used counter battens, then battens or you trap any leakage against the battens. You also put sarking at bottom on wrong side up for the same reason….and water will lie in the bottom lip of the overlap. But to start with I would have stripped the whole roof and covered it with Stirling board first. Then on completion inserted kingspan between the joists. Proper insulated.
@adamakaru26832 жыл бұрын
Hahahahaha I love the cat how sweet :-)
@hannecatton21793 жыл бұрын
Counter battens are all the rage these days !
@Thomas-jt2un3 жыл бұрын
Hallo Leute, hier liegt ein Konstruktionsfehler vor. Ich bin gelernter Zimmermann und was passiert wenn man auf der Unterspannbahn direkt die Querlatte anbringt? Sobald Kondenswasser von den Dachziegel abtropft, läuft die Wasserbildung an die Querlatte. Holz und Wasser vertagen sich leider nicht, und das Holz (die Latte) verschimmelt. Es gehört immer eine Längslatte auf den Sparren und dann die Querlatte auf die der Dachziegel eingehängt wird. Das wäre Fachmännisch hergestellt.
@michaelplays24493 жыл бұрын
Great video, thanks
@paulettejabbar56612 жыл бұрын
Bravo madame
@HugoRosales5 жыл бұрын
Incredible as it seems, I used to live in a tiled roof house with no boards and no membrane, only the rafters and the battens! If a tile breaks you can replace it from inside the roof!
@carlroge5 жыл бұрын
Nice! Old school cool
@johndockman98222 жыл бұрын
Most laxadasical chalk line snap I have ever seen
@johnnythomas80364 жыл бұрын
i gauge my roof out after i’ve put first batten on. my tape tells me how many courses of tiles and at what gauge. is it just me or does this seem ludacris.?
@MrLukedanger3 жыл бұрын
Sometimes no matter what you do the roof is so far out you never get to loose the difference
@andersonleal50773 жыл бұрын
Parabéns trabalho show de bola.
@electric7765 жыл бұрын
you have the pretiest help...i envy
@danburt83514 жыл бұрын
Why would you use a chaulk line to position the felt but not use it when lathing? Never ever seen anyone gauge with 2 bits of timber ha! Another tip. Nail the top corner of the felt then roll it to the other side. Pull tight and fix then drop back to where you first nailed & pull that tight. Magic. No creases in the felt
@osvaldocristo6 жыл бұрын
Interesting... I see you gauge the space between the horizontal tile support by the internal distance. In my side of the world we use to gauge between the upper portion of consecutive support stretchers.
@carlroge6 жыл бұрын
Interesting, where's your side of the world?
@osvaldocristo6 жыл бұрын
I am in Southeast Brazil
@Songs-vy7qu4 жыл бұрын
How many inches between the wood struts on the felt please..
@juliandodwell82133 жыл бұрын
Sumer. On the tile.
@tboolah16 жыл бұрын
رائع ، تبارك الله 👏🏻
@markf72423 жыл бұрын
Де контрарейка?
@doubledarefan5 жыл бұрын
1:44 Looks like a gun sticking out of that helicopter!
@juliandodwell82133 жыл бұрын
Militaire
@iworkweekly2 жыл бұрын
Is there somewhere where you talk about who you and your dad are? Is he in construction?
@SpeedevilX12 жыл бұрын
Great vid but clearly those batten will rot away. Too bad :-(
@Tony-qg4km6 жыл бұрын
Как дерево называется ?
@riderpjrhd87556 жыл бұрын
Waterproof?the amount of nails put in,how many holes?
@carlroge6 жыл бұрын
Watertight!
@slavkoljiljak29108 ай бұрын
why don't the English put osb plates
@mysoneffa24173 жыл бұрын
My only resrrvation is its a mistake to oak boards together, on the eves, if the wood is cured, as they will expand when damp & buckle, but if wood is green it a best practice as wood will contract as it drys out.
@ottiturek31565 жыл бұрын
Why the birdsmouth ? Holy shit. Young students!!!!!!!
@brotschuh5 жыл бұрын
So far for the bird mouths 😅
@fintan35633 жыл бұрын
It is very hard to go back to the very beginning of your vlogs. There’s another Carl Rogers who is a therapist and your vlogs get lost among his. 😢😢
@afrarunduml11703 жыл бұрын
He is one of the most important psychologist of the modern time. Every nurse, care taker, educater and so on knows his work and name. But this Carl Rogers has no problem to get viewed with his carpenter work. He has millions of views.
@taffytop3 жыл бұрын
This is how not to felt and Batten a roof
@winterroadspokenword46814 жыл бұрын
That felt is too tight
@juliandodwell82133 жыл бұрын
A bit but its summer.
@erlpen20166 жыл бұрын
you guys don't own any power tools?
@BlueGamerDude6 жыл бұрын
nice!
@gary247526 жыл бұрын
No roof sheathing? Bad idea.
@winterroadspokenword46814 жыл бұрын
Lol. You American? Haha we have been building roofs without sheathing in Europe for Millenia. I think it will be fine.
@RMAMECA6 жыл бұрын
es-tu français ?
@carlroge6 жыл бұрын
je suis anglais
@greenking60776 жыл бұрын
Vue la plaque je pense que tu habite en France
@tangodown57466 жыл бұрын
L'hélicoptère qu'il filme au début est un Gazelle de l'armée française donc oui il est quelque part en France :)
@tonyb32895 жыл бұрын
Il a un peu inverser les lattes et contres lattes . L eau coule comment ?
@mathieudelaspre98425 жыл бұрын
Par ou commencer ? Premièrement tu aurais pu délarder ta sablière ça t'aurais éviter les pas sur les chevrons, que tu aurais pu faire d'un seul tenant ce qui aurait été structurellement plus adéquate. Ensuite les contrelattes sont nécessaires pour la ventilation et pour tu n'ai pas payée ton par pluie pour rien car l'eau dans ton montage ne peut s'evacuer. Pour enfoncer le clou (humour de charpentier) les contres fiches se lie au poinçon et non a l'entrait et cela pour que la triangulation se fasse de manière optimale
@dragomirmiric72105 жыл бұрын
Che sei un Italiano?
@Mayim494 жыл бұрын
Italiano? Ma com'è italiano ... è inglese
@HugoRosales5 жыл бұрын
We here build tile roofs in a completely different way (meaning the location of the boards and the membrane). No offense intended.
@philbotherobot2 жыл бұрын
Felts to tight
@nathano2778 Жыл бұрын
Why cut off the bird mouths after spending so much time making them
@Francis.Coppola2 жыл бұрын
Excellent job tkx u gave me a good id€a 😜
@gacodon753 Жыл бұрын
Which country in asia has the most diabetes?
@PBS-nm1uu Жыл бұрын
no explanation means this video is useless
@vaninhle33513 жыл бұрын
Hfchu
@fuzzzeballs6 жыл бұрын
your in the south of france near dax
@marco_au_boulot67476 жыл бұрын
Yes i think they are in Gers (32). Nice job. I have the same kind of roof but i have added what we call "voliges" in french between rafters and "parepluie".
@fuzzzeballs6 жыл бұрын
concrete is bad in these buildings, seems ok at the time but its a bad mix, moved from france when the brits flooded the place now the cunts have followed me to hungary!
@paulsmith-ky5dp6 жыл бұрын
Thank the Fuck your in Hungary..........
@aruuuba6 жыл бұрын
Fuzz Zeballs So what would you use instead of concrete?
@fuzzzeballs6 жыл бұрын
rebuild the top with rubble rocks and lime then set wall plate on top of that, why you say? the concrete dosent shift its too ridgid for the wall it sits on and often leads to major cracking in the walls, old and new dont mix