DIY SHOOTING BENCH

I get many questions about the shooting bench that i am using in my videos , what brand it is or where you can buy it .
But actually its a DIY project that you can build yourself .
Plans :
www.dropbox.co...
Music credits :
Epidemic sounds
Trampoline Park Avenue - Martin Klem

[@12VALVETORQUE]

I have always admired your shooting bench! please thank your Father in Law for us, and thank you for sharing. One day soon other people will be admiring my shooting bench too!

[@Airbuks]

Thx mate , I will tell him 👍🏻

[@Kerry-i9j]

Thank you for sharing this!

[@ralstonraz]

Wow... This is amazing... Am going to give it a try

[@donfullbright8468]

Nice job

[@promitheasapollonious4230]

Thanks for the plans. New project under way for me, DIY better than buying one.

[@Airbuks]

DIY is always better 😉

[@markfenner7896]

Superb many thanks 🙏

[@Dont_lose_sight]

I am jealous of this design.... maybe I can talk my own Pops into using his wood shop as mine is 'under construction' ! Thanks for sharing!

[@Airbuks]

Your welcome

[@Dont_lose_sight]

@@Airbuks My father , he has a better more conducive Wood shop than I, a dedicated one. Due to 'Intractble Pain' - many surgeries physical traumas, collectively, we make from Boating Fiberglass, perhaphs 23/32" THICK outer-foam board, have you tried that? You ENCOURAGE FAMILY time. Invaluable. I share chronograph numbers with cast ammo! Free gunsmith info! This bench of yours, even the grandkids CAN to learn to shoot CORRECTLY, first, then off fence posts/sticker-briors! THANK YOU

[@TheSopranosUkeDuo]

That is a brilliant bench, thank you so much for sharing

[@Airbuks]

👍🏻

[@Joelife73]

Fantastic table my friend 💯Best regards from Portugal 🇵🇹👊😉

[@Airbuks]

Thx

[@larskjeldgaard]

thanks for all your super videos. you are simply just the best at getting the little details. it is because of you I have bought my FX m3. then your videos step by step. and super table.

[@Airbuks]

Ha nice to hear 👍🏻 are you enjoying your M3 so far ? What configuration is your M3 in ?

[@larskjeldgaard]

it's super. it is in cal 25. and shoots with zan slugs. 33 gr 1030 fps. ca 80 fp.

[@Airbuks]

@@larskjeldgaard nice 👍🏻

[@NorthEastFool]

Thanks for sharing the design.

[@allaboutpcpairguns7069]

That is awesome thanks brother 🙏

[@Airbuks]

Thx 🙏🏻

[@MrTyroneweaver]

Pretty cool, but here in America you would have to float a loan to buy the wood.

[@Airbuks]

Yeah , these days materials are getting expensive 🙈

[@johnbridges6760]

Great video as usual. I really enjoy watching you and your helpful tips

[@Airbuks]

Thx for the comment and support John 🤟🏻

[@charliemifsud57]

What a great bench . How do I Aquire the plans ? We call it form ply in Australia. Thanks for sharing

[@steveshaw1447]

hi, is this made from one 18mm plywood sheet please ?

[@Airbuks]

Yes

[@markpallister6195]

Thanks mate, got it in the description, great videos and very helpful, my FX Maverick should be here any day soon ready to pick up from the gun store, hooray after a four month wait, keep them coming.

[@Airbuks]

You will love the Maverick , great rifle ! What caliber and barrel length did you buy ?

[@markpallister6195]

Hey mate, ordered it in 25 cal and 700 mm barrel. Thank you cheers.

[@Airbuks]

@@markpallister6195 25 is a great caliber 👌🏻

[@GeKo1966]

Awesome! Thanks man, and for dropping the schematics in dropbox! No that much of a handyman and do not have the tools, but fortunately have some friends that have the tools and the know how to make one for me at some point, thanks to your schematics. 🙏🏻👌🏻💪🏻

[@Airbuks]

Your welcome mate , Always good to have some ( handy ) friends 🤜🏻🤛🏻

[@iamnegan1515]

Nice work. 👍

[@Airbuks]

Thx 🤙

[@loiusmonroe1146]

Thanks for the great Vid, I will be making this bench next week!!

[@Airbuks]

Sweet , let me know how it turned out

[@CARLOSSOTOVIC]

Amazing, thank you so much for sharing!!

[@garyjtrek]

Great Shooting table. How do I get the schematics to build one. Thanks

[@Airbuks]

There is a download link in the video description 👍🏻

[@amunraa1]

Hi there, first of all, thank you very much for your great videos. I downloaded the pdf file with the dimensions but it's not clear to me in which units they are. could you please give me a hint? thx in advance greetings from Austria

[@Airbuks]

Normally the measurements are in inches if I remember correctly.

[@amunraa1]

@@Airbuks many thanks got it

[@dog2k9]

Thank you for all your hard work providing content for us to learn, discover and enjoy.

[@Airbuks]

You’re welcome, hope I can keep bringing interesting content 😉👍🏻

[@kitmurphy2707]

​@@Airbuks, didn't you say that you were adding a link to the plans? Thanks in advance.

[@Airbuks]

@@kitmurphy2707 yes there is in the video description

[@Airbuks]

@@kitmurphy2707 it is in the video description 😉

[@guydnls387]

Hallo , kan je je schoonvader vragen om de plannen aan te passen aan jou bank zoals in de video . Bijvoorbeeld het middenstuk staat niet in de midden van de bank maar op tekening wel ( had ik op voorhand gezien 🙂) , het brede gedeelte van het bovenblad is op tekening 71cm (28inch) maar in werkelijkheid langer . Dat had ik te laat gezien 🤨. ik heb het dan maar verlengd ( stuk aangelijmd ) naar 81 cm en nu past mijn impact er beter op. Ik ben heel tevreden met het resultaat en die verlenging werk ik wel weg met een folie ofzo . 👍👍

[@Airbuks]

Hoi , bedankt voor de commentaar 👊 ik zie hem vanavond en zal hem eens vragen of hij bij mijn bank iets veranderd heeft . Ik weet dat het zitvlak op mijn bank iets voorruit geschoven is omdat ik niet de grootste ben 😉 Nu ik de tekening bekijk staat inderdaad de midden rug niet in het midden . Het boven blad is op tekening 30inch / 76.2 cm heb dat even nagekeken en dat klopt op mijn bank ook

[@northballistics]

Awesome bench. :)

[@Airbuks]

Thx

[@Imperium321]

Great video! I’ve always wondered how this shooting bench was made. Thank you so much for sharing this. To confirm, all the dimensions in the schematic are in inches?

[@Airbuks]

Yes they are , most of my viewers are using the imperial system 😉

[@streetfighter3k]

Mooie stevige en precies ook wiebelvrije bank Mathias! Misschien moet ik eens een handige Harry zoeken die eraan wil beginnen 😎. Fijn dat je de plannen deelt en dank je daarvoor!

[@Airbuks]

Ja zelfs op het gras is hij heel stabiel, op vaste grond nog veel beter natuurlijk. Het is een zeer comfortabel zitplaats . Hopelijk vind je een handige Harry 😉

[@Leta-p8e]

Very nice

[@Airbuks]

Thx

[@taffrican]

Great bench, where can I find the plans?

[@Airbuks]

Plans can be downloaded true the link in the description

[@mrkmrk105]

Hoi, wie komme ich zu dem link zur Bauanleitungen. Ich konnte hier nichts finden? Echt super der Tisch und handlich.

[@Airbuks]

Hi , there is a link in the video description where you can download the files

[@yossshooter1198]

Awesome, thanks!!!

[@Airbuks]

Thx

[@PaulHamM3]

Plywood is the word your looking for mate!, good video.

[@Airbuks]

Thx , didn’t know if this wood was also called plywood. In my language it has a different name 😉

[@peteralexben]

laminated board also fine

[@Airbuks]

@@peteralexben 👍🏻👍🏻

[@dustindowd1108]

Would love to see the plans!

[@Airbuks]

You can download them true the link in the video description 😉

[@bulufish8208]

Take out a patent my friend.😃. Good way to start a business.

[@Airbuks]

I don’t need a patent 😉 I am here to share 💪🏼

[@bulufish8208]

Just a suggestion 😉

[@dannykarremans8004]

Wow knap. Vanwaar ben je? Zelf gemaakt of een goede schrijnwerker?

[@Airbuks]

Thx , gemaakt door mijn handige schoonvader 👍

[@andriessluiter4269]

We zeggen er hier betonplex tegen. Mooie tafel trouwens.

[@Airbuks]

Dat zeggen wij ook maar wist niet of er een specifieke naam voor was in het Engels 😉

[@markpallister6195]

Hi from down under, would you mind sending through the schematics for your awesome shooting table please to my inbox please, thank you and cheers.

[@Airbuks]

Hi mate , there is download link in the video description

[@Tunnelrat6666]

Did you end up making one?

[@markpallister6195]

@@Tunnelrat6666 Hey there, yes I did and it is awesome, converted the inches to millimetres as near as damn it and hey presto the best take down bench I’ve ever owned, extremely stable and strong and transportable. Recommend you build one, even if you only have limited carpentry skills.

[@saadshamoon8034]

👍👍👍

[@rudyfrengadipuput2373]

Your smart and smart chanel

[@Airbuks]

Thx

[@aupkid]

Where’s the link for the dimensions 👍🏻

[@Airbuks]

In the video description 👍🏻

[@ralphpipkin6226]

How can I get 5he plans?

[@Airbuks]

In the video comment there is a link to download 😉

[@ralphpipkin6226]

I was able to find the link. This is a well engineered design that will fill the need for many. Thanks, Ralph

[@ralphpipkin6226]

Other viewers have asked about the materials of construction. I see this as a phenolic plywood which is superior to plywood. The wood sandwiched with the phenolic resins make it denser, heavier, stronger and more moisture resistant than standard plywood. The surface of this material very slick and is already sealed and does not require additional coatings.

[@biakmawia]

I will copy, thanks for sharing

[@Airbuks]

👌🏻👍🏻

[@woodbutcher494]

we call it form ply

[@Airbuks]

Thx

[@hmoobtojsiabchannel7733]

Hi

[@Airbuks]

Hi

[@lilyflynn7775]

p͎r͎o͎m͎o͎s͎m͎ 😢

[@Airbuks]

?