DIY Side Table | End Table | Chevron Round Table

DIY Side Table | End Table | Chevron Round Table
In this video I will show you a step by step process of creating a beautiful round Chevron Table. The process starts from milling rough cut lumber and goes all the way to finished product. I hope you will enjoy this video as I do the end result.
There will be some plans available hopefully by the end of next week. When they will be done you will be able to find info on how to get them here.
Workshop projects used in this video:
Table saw Sled for Evolution Rage 5-S - • Table saw Sled for Evo...
Mitre saw jig for cutting small pieces - • Mitre saw jig for cutt...
T-Track Stop Block System for Flip Top Mitre Saw Workbench - • T-Track Stop Block Sys...
Tool cart with a lift mechanism for a planer - • Tool cart with a lift ...
Workbench with a Flip Top mitre saw station - • Workbench with a Flip...
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more.
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co....
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/...
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/u...
Web page - www.casualdiy.com
Email - [e-mail]
#casualdiy #woodworking #table
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

[@bryandavies6074]

Nice to see you back in maker mode.

[@CasualDIY]

Glad to be back😁

[@markduggan3451]

Really nice project mate, hope you're keeping well.

[@CasualDIY]

Thank you. Yes mate all good, the prices could be lower (of everything, buts that's a trend everywhere I think) but all is well.

[@travisraab]

YES thanks for making this! you have good tools lol

[@CasualDIY]

Thanks, all budget tools mate👍

Hello my friend, Another great job. A unique piece, lots of style and lots of creativity. decorative and stylish. A nice coffee table. Thanks for sharing. see you later.

[@CasualDIY]

Thank you for the kind words. Hopefully will not fall apart over time😅

@@CasualDIY You're welcome. I think it looks unbreakable. See you.

[@stephencave187]

Very smart job. Well done 👏🏻

[@CasualDIY]

Thank you kindly

[@Thesidingsworkshop]

Nice build mate love the look of the side table 🤜👍 nice mate 👍

[@CasualDIY]

Thank you kindly. Glad you like it😀

[@michaelowen335]

Great job Thomas👍👍

[@CasualDIY]

Thank you very much 👍

[@DeafMaker]

Very nice, I can tell by your body language and the massive grin on your face how chuffed you are with the result, and rightly so.

[@CasualDIY]

Hehe yes it looks better than I thought it would. Fits perfectly where I wanted it and above all..... my wife loves it too😁👍

[@DeafMaker]

@@CasualDIY wife's approval is the most important thing.

[@FuzzyScaredyCat]

You really need an outfeed table. Maybe one that you can use for the table saw and thicknesser?

[@CasualDIY]

Yes thats true. I will get something sorted 👍

[@waynehood3712]

Lovely job

[@CasualDIY]

Thank you

[@gizmogaraz2023]

Elegancki stolik Tomku, w trakcie filmu zastanawiałem się jak będzie wyglądała na obrzeżu dolna warstwa cała jasna i górna mieszana ciemno jasna, i jakoś nie bardzo mi to się widziało, zabarwienie obrzeża w całości na ciemno rozwiązało sprawę , super, :)

[@CasualDIY]

Hehe dzieki wielkie👍

[@kstewart3657]

Excellent work 👏

[@CasualDIY]

Thank you

[@christophergraham1857]

Great job

[@CasualDIY]

Thanks 👍

[@TheWielebny44]

Awesome this table 👍👍👍

[@CasualDIY]

Thanks👍

[@Chuffy1976]

Really liked this project :D I have some Bedside tables to do soon and projects like this help with ideas.

[@CasualDIY]

Thank you very much. It was a fun project I must admit 👍😁

[@trickster11300]

Good job, looks great!

[@CasualDIY]

Thanks!

[@MikeWilliams-yp9kl]

Just recorded at the right time as I'm making a bird table using similar techniques, great piece of Table art MR DIY PROFESSIONAL 😎

[@CasualDIY]

Hehe still far away from professional but I will get there one day😁👍

[@kenthesparky178]

Great job👍

[@CasualDIY]

Thanks👍

[@phumphreys9827]

Great to see your up and running with your workshop. Missed seeing your creative mind at work together with your tools 👍

[@CasualDIY]

Yes finally I can start making things. It was long time coming. But I'm finally here 😁👍

[@handyjim]

nice job

[@CasualDIY]

Thank you 👍

[@STANWoodwork]

Nice build looks absolutely lovely. To cut the circle you can try use router to start from the back for about 5mm depth then finish cutting with the jig saw on outside router grove. And on the end install flash trim with bearing in router and finish it of using inside grove wall as a guide for bearing.

[@CasualDIY]

Yes thats a good idea and next time I think I'll try just that. Much safer, quicker and easier

[@xlfive]

that turned out great Tomasz,nice to see your new shop working

[@CasualDIY]

Thanks. Yes I'm so glad that I can actually make something 👍😁

[@johnvodopija]

The design is beautiful. I enjoyed watching the build process too. Cheers 👍😎🇦🇺

[@CasualDIY]

Thank you! Cheers! Happy New Year 🎇🎇

[@thehobbyguy]

Amazing

[@CasualDIY]

Thanks

[@eyuptony]

Striking design and build Tomasz. Great to see the projects starting from your new workshop. Tony

[@CasualDIY]

Thanks. Yes I'm so glad I can finally start making things 👍😁

[@gailjohnson3544]

Hi there and beautiful woodworking. My question for you is, how thick of a board is being used?

[@CasualDIY]

For the legs it's 2.5cm. For the top its two layers of 1.5cm so 3cm total

[@lawman1965]

Great video, and love the new workshop layout. It looks like you have more space than your UK garage space.

[@CasualDIY]

Thanks, yes much more space. The garage in UK was 13m2 and this one is 21m2 plus I got another room about 9m2 that I will use for resin work😁

[@donroutledge9115]

Hi Tom lovely table. A tip to stop tear out of the grain is to use some kind of masking tape on the vulnerable side of the table. And also if you use the router to remove only half the thickness of the table top and then use a jigsaw to finish leaving a small amount of material and then use a flush bit on your router to finish the job this will reduce the amount of material you would have to remove by use only the router

[@CasualDIY]

Thank you. Yes I think that is the way to go forward with the jigsaw👍

[@donroutledge9115]

Hi Tom Nice workshop it bigger than mine . Well done. Don😇

[@CasualDIY]

@@donroutledge9115 hmm I don't think it is. Yours was huge unless you changed it ?

[@idlersdream826]

Fantastic job! Looks amazing 👍, good to see the new workshop in action.

[@CasualDIY]

Thank you. Yes it was long time coming 😁👍

[@yossiyaari3760]

The lifting planer carts are neat. Is there a video on that? our or coming?

[@CasualDIY]

Thanks. Yes got videos on them. The links are in the description of this video👍

[@danutafranczyk8663]

Top top work Tomasz! Looks stunnig!

[@CasualDIY]

Thanks👍

[@reframeyourbody]

Looks good! Glad to see you back doing projects! Hope you don’t get any problems in the future but using plywood as a base for the chevron pattern would be safer... the ash base might move and crack... the you could do a segmented ring to create the solid wood chamfered rim

[@CasualDIY]

Well I convinced myself that I shouldn't have any issues. The wood was 5% moisture, the slats are relatively small with alternating grain so they should counteract their movement. The legs are attached in a way to allow for movement and the varnish should give a good seal. But time will tell if it will break. But you can be assured that if it does I will report on it 👍

[@lawman1965]

I've seen a guy cut a groove with a router, he then cuts in the groove (the outer edge) with a jigsaw (a bandsaw would work) then, using the original router groove, he uses a flush trim bit to finish the cut.

[@CasualDIY]

Yes that would be a good idea👍

[@keefykeef]

Really nice project Tomasz, looks great

[@CasualDIY]

Thank you very much 👍😁

[@darrenpaulgreen]

Great job Thomasz! What’s the blade you’re using in your mitresaw? I’ve the evolution rage 3 (old version) and the multi-material blade leaves a pretty rough finish.

[@CasualDIY]

It's a Freud blade, very good blade👍

[@lawman1965]

What are the wood prices like over there? Are you able to get more for you money?

[@CasualDIY]

In relative terms I would be able to get more in the UK form my old wage. The price of wood here and in the UK is more or less the same but the wages in the UK are higher... unless you got a friend working in a timber yard you will have to pay a fortune for ply or wood of any sort. Hence most of my workshop projects like new benches and cabinets are on hold, I'm waiting for the prices to come down.

[@lawman1965]

@@CasualDIY same here. I'm retired and new to woodworking. I went up to Cheshire yesterday for Birch Ply and the cost was ridiculous!

[@jimwood73]

Is “Grunt” a brand or a colour in Poland? 😀

[@CasualDIY]

"Grunt" = sealer 😁👍

[@donroutledge9115]

No it's the same one but yours looks bigger than mine . Missing talking to you do you still have my phone number?

[@CasualDIY]

My new workshop is 21m2 plus a side room 9m2. No o don't have your number, I've changed my phone and number a while back. Lost most of contacts.

[@mrb4408]

Ahhh!!! Grain direction on the plugs. 🫣

[@CasualDIY]

Can't see them with stain anyway 🤣

[@mrb4408]

@@CasualDIY lovely job, just my OCD.