DIY Squirrel Feeder | Easy DIY Project | 松鼠喂食器

The other day I noticed squirrels wandering around in our backyard. My son loves animals so I decided to make a squirrel feeder. When a squirrel stands on the platform, the lid will open, allowing the little critter to access the food inside. Near the end of the video, you can see the cute squirrel getting snack from the feeder.
I also noticed peanuts seem to attract squirrel the most. There were also a few birds visiting the feeder, but none of them were able to get the food.
- One piece of 5' Cedar fence picket (from Home Depot)
- Everbilt Hobby Hinge (from Home Depot)
- Some plexiglass
- 1" and 2" outdoor screws
Free plan (SketchUp 2017 .skp file) available here: drive.google.com/drive/folder...
我做木工DIY用到(或推荐)的工具 / These are the tools I use : www.amazon.com/shop/dingswork...
This project was inspired by Kings Fine Woodworking.
#dingsworkshop #diy #woodworking

[@unclejohn11]

Beautiful squirrels ❤

[@ronberlier6695]

Building process and accompanying graphics very well done.

[@user-pi4zo2ky4h]

小可爱 终于学会怎么取食啦 ！！

[@yaohualan4407]

视频做的挺好的

[@rickdowe7865]

Thank you

[@user-qf5ek4vy7t]

你和網紅 四川的TUTU(介 紹IT 產品)的演繹方式好似

[@ffemt4137]

What size did you do to pre drill at the pivot point? Also, what size screws did you use? #8’s?

[@yaohualan4407]

另外发现您工作台面侧面没有边缘凸出，这样如果用夹子固定板材到台面上时，怎么固定？另外电木台面是用胶水粘在木架上的吗？

[@DingsWorkshop]

有两个边缘都是有侧面突出来3” :) 方便来夹东西。固定的话，我是从底下往上用螺丝固定的。这样的话以后台面坏了，换新的很容易

[@mingxingdai3887]

这个设计图纸是用什么软件设计的?

[@DingsWorkshop]

SketchUp 2017. 是免费的软件

[@getthingsbuilt1342]

@@DingsWorkshop can this software be used on the phone?

[@DingsWorkshop]

Hmm I believe SketchUp 2017 is for computer only

[@rickdowe7865]

I would like to build could you send dimensions. I would appreciate it

[@DingsWorkshop]

I have the dimensions in the descriptions

[@Sean-nn5jo]

Are you going to hunt them with an airgun?

[@DingsWorkshop]

Wha? No