DIY Studio Subwoofer Build video 8” 100w

Parts List
Dayton audio 8” subwoofer: rb.gy/oustc5
Dayton audio subwoofer plate amp: rb.gy/ze9xkl
Textured speaker paint: rb.gy/hqvunx
Textured paint roller: rb.gy/iyq0ni
#6 Black speaker screws: rb.gy/6hh3y0
Speaker box poly-fill: rb.gy/npzm5r
Mount by KV / kvmusicprod
Creative Commons - Attribution 4.0 International - CC BY 4.0
www.creativeco....

[@BGTech1]

Correction: please follow the dimensions on the plans seen at the beginning of the video, and not the dimensions written on cut pieces. Sorry for the confusion.

[@mattmoreira210]

Blimey! That speaker is a looker, isn't it?! That sexy aluminium cone in that texturised cabinet, fantastic!

[@BGTech1]

For sure! I’m happy that This build turned out really well.

[@unclecooper9409]

0:42 you will see this when you use the perfect amount of glue

[@Vintoneuler]

hey!! I am trying to build a grapling gun on a budget. do you have any advice on how to make a small one? I feel like you are knowledgeable, I was thinking using a slingshot design on maybe like a gun-ish function to shot a sharp object (undecided of what yet) to stick into a piece of styrofoam or maybe even wood lol

[@BGTech1]

I’ll look into it

[@BGTech1]

Hey, I looked into it and it looks like the best way would be to design one from scratch and 3d print it. I’m willing design one, 3d print it and ship it to you in the mail if you could do a small favor for me in return. That is if you could mention my channel somehow like a mention in a video or in your community tab or something. Also I’ve got different colors of filament I’ve got blue red green white and black lmk what you’d like.

[@mhnoni]

How is the frequency response? otherwise it's hard to judge.

[@BGTech1]

It should be pretty good. I haven’t taken a measurement. There is a lot of good frequency response information on the parts express page for this sub.

[@mhnoni]

@@BGTech1 The special thing is the box you made, it can make the speaker shine or dim. do you think it hits 30hz with --10db since it has no port? I assume you took the box spec from the official Dayton site? Anyway, the box looks amazing. well done.

[@BGTech1]

@@mhnoni I did go for the recommended sealed box size listed on parts express, so I’m guessing it will hit that response.

[@taglcsnhorrorgamer9303]

Aertygdh 🤖👌