DIY Table Saw - How to make a homemade Powerful Table Saw With 775 Dc Motor

How to make a homemade Table Saw With 12-24volt 775 Dc Motor
Materials and buy links:
775 DC motor: bit.ly/2TN3F5H
775 motor bracket: bit.ly/2XhdKJT
8mm Bore Diameter Ball Bearings(KP08)*2: bit.ly/2OftQj9
XL 20tooth Timing Pulley Hole diameter 8mm: bit.ly/2CLwS9B
XL 10tooth Timing Pulley Hole diameter 5mm: bit.ly/37cAsHZ
90XL Timing Belt: bit.ly/2rHtxpG
M10 arbor mandrel adaptor 8mm shank: bit.ly/2KFWfhQ
100mm x 8mm Steel shaft: bit.ly/2P5FLDK
4 Inch 40Teeth Circular Saw Blades: bit.ly/2QkPOUH
12V-24V DC Power Adapter: bit.ly/2lF5aX6
Switch: bit.ly/2LkPwZZ
DC5.5 socket: bit.ly/2nrJChA
Wood board size in the video
-------------------------------------------------------------------------------------------------------------------------------------------------
About Apour Maker Channel:
This channel is all about DIY, How To, Home Made, Great Ideas, simple, funny and entertainment.
-------------------------------------------------------------------------------------------------------------------------------------------------
I am going to post different DIY projects frequently so for more upcoming projects don't forget to subscribe to my youtube channel.
Stay tuned for upcoming videos.
-------------------------------------------------------------------------------------------------------------
Music:
Advertising by Rafael Krux
Artist: / rafaelkrux

[@trantrieucuong7918]

Ok 👌 Im Supbcrie Like DIY 🌟

[@apourmaker6055]

Thank you!😀

[@hkmind2661]

It is center of 450mm or what?

[@miky492]

Could you please send me the measurements of the woods used in your project

[@joeyeh2802]

請問你的775馬達額定電流是多少？

[@Giovanni2862]

How can I adjustable angle between the inner bearing and outer fixing ring (KP08)?

[@apourmaker6055]

Hi,I can't understand what you mean, KP08 already contains bearings, and it has screws that can be fastened to 8MM steel shafts.

[@apourmaker6055]

KP08's inner bearing and outer retaining ring cannot be adjusted in angle

[@hkmind2661]

Blade marking measurement plz

[@wasusipitukkiat9152]

Hi how much thickness of wood

[@meteceritli7413]

How tight is that belt? I tried to make the same but somehow belt is running free when the blade is forced by any wood.

[@apourmaker6055]

Hi, the timing belt should be tight and you should adjust it.

[@ahmedelhout4929]

For

[@rahmadyannurwidhi226]

do you use the adapter as power?

[@apourmaker6055]

Yes, I use a 12-24V DC power adapter.

[@apourmaker6055]

If you have a laptop adapter, you can do it.

[@SAINT200690]

Do you remember how much it roughly cost and where you got the stuff from? =)

[@jyotighatol8398]

hey bro pls pls pls give this to me pls i dont have a drill machine so i couldn't make this pls bro

[@Afu_channel]

請問有在販售嗎？

[@apourmaker6055]

没有哦

[@andijaya5802]

Bro, I want to try making it, but I'm still confused, what's the difference if the shaft connector is directly installed on the dynamo (it doesn't use a pulley) What is influence? between using a pulley with a direct attach to dynamo

[@apourmaker6055]

Hi,If the shaft connector is mounted directly on the motor,It will not have enough power, and the speed of the saw blade is too high, which is not safe. The use of a pulley can reduce the speed of the saw blade and increase the torque.

[@andijaya5802]

@@apourmaker6055 thanks for explanation, i'll trying now Good job 🔥

[@joel800]

Hello, dear friend, it's been one year since you uploaded this video. I got inspired by your impressive work. Could you tell me if this machine still works ?

[@apourmaker6055]

Yes, it still works, I still use it

[@joel800]

@@apourmaker6055 Thanks for applying. Now I make decision to make one. But there's one thing confusing me. If we don't use transmission belt, but only put the saw on 775 motor instead. Does it matter ?

[@apourmaker6055]

If you don’t use a transmission belt, it has a high speed but a low torque.

[@joel800]

@@apourmaker6055 Glad to know this. Appreciate. If I don't misunderstand, the one with low torque but high speed is easier to break the blade or even the motor, is it correct ?

[@apourmaker6055]

Yes, low torque and high speed are easy to break the blade, and it is easy to stop rotating when cutting without enough torque.

[@joeyeh2802]

請問您如不含木板，所需材料費約多少錢？這些零組件要上那買？噢對了！我已有一顆775馬達，扣掉這個還需多少費用？ 我很喜歡DIY也喜歡這個視頻已訂閱。 謝謝您

[@apourmaker6055]

您好，我算了一下，不含木板和775電機，大約60多RMB，都是在淘寶網購買的材料。

[@joeyeh2802]

@@apourmaker6055 了解，謝謝您

[@user-ob3pg6sb1d]

Чому не записати реальний звук роботи циркулярки,а то музика,музика.😢