Very pretty speakers and such a nice video! Would be great with a sound video as well🫶
@medigradeLSD Жыл бұрын
nice, tapped horns are the nuts, i built double 12s and i love them...
@hrdu Жыл бұрын
Respecting that you went «all the way» when making this 💪
@sc0or4 ай бұрын
One side emits a sound 3ms later than another one. Starting from 300Hz there will be stripes on FR graph. Take a look at a classical cabinets: a driver was placed near a back wall, and so both paths were about equal
@kaedeschulz54223 ай бұрын
Not much of a problem for a subwoofer. I build a infrasonic tapped horn with over 8m Horn length and it's the tightest sounding subwoofer i have ever heard.
@pekkatoikkanen39968 ай бұрын
I've built small tapped horn (THAM 12) subs too. this makes me wanna build some more and bigger ones. But I would need all panels pre cutted in shape.
@SWF-nw8rk2 ай бұрын
Would love to see more content - are you still making speakers?
@joemonteithcinematography7477 Жыл бұрын
Awesome! Was this your first speaker build? I've never worked with wood before lol, but might want to build one of these someday. How hard would this be for a beginner to build assuming time and care is taken on the build?
@LSCspeakers Жыл бұрын
I have been building for 6 years, this is not an easy build. You need to get some experience and knowledge if you want complicated design. There plenty of simpler designs out there. A simple tidy clean build is more rewarding than a messy complicated one.
@joemonteithcinematography7477 Жыл бұрын
@@LSCspeakers Thanks for the advice. Do you think something basic like the G-Sub or another simple braced ported enclosure is where I should start?
@LSCspeakers11 ай бұрын
@@joemonteithcinematography7477 yeah somthing simple, or try x1 letterbox
@audiosolucionesas10 ай бұрын
Saludos desde Colombia Que buen vídeo, felicitaciones!!! Dónde podría encontrar ese medidas?
@flamintasty9 ай бұрын
Great build, well done.
@leonardobarroso5796Ай бұрын
Você pode passar as medidas? Quero tentar fazer
@79stepanek Жыл бұрын
Hi, I have a PD1850/3. I am thinking about building 4 of these boxes. I believe it will play well. Are you satisfied with the sound? Thanks Martin.
@jordz101810 ай бұрын
Don't build these they are trash designs instead you should turn the back of the speaker driver to be inside the case so it actually uses the room to vibrate and make it sound good. The way it's in this video its gonna sound like a hollow 10 inch speaker because of how bad the design is I've heard these designs in person they don't work at all
@LSCspeakers9 ай бұрын
As pd1850 was the driver on the original plan, /3 would probably work very well.
@79stepanek9 ай бұрын
@@LSCspeakersI'm finishing building the first box, I'll try it and see how it plays. Building this structure was quite difficult, hopefully it will play well, I will consider building more pieces accordingly. Of course, it also depends on the amplifier and the DSP settings.
@johnhalliburton6219 ай бұрын
Slow news day, eh? Just felt like trolling apparently.
@chasepe5762 Жыл бұрын
Very cool!
@michaljanis80166 ай бұрын
nice build
@dickscrossedgarage7 ай бұрын
blue balled me i need to hear this
@airhood883 ай бұрын
For wich Chassis is that building
@aleksamarskyy2908 Жыл бұрын
Very nice!
@markaldaya6815 Жыл бұрын
XL?
@ELBEFISHING8 ай бұрын
Build plan ?
@Y0GAAAA7 ай бұрын
Beautiful build ! how many layers of paint (is it not diluted ?) did you end up putting ?
@LSCspeakers7 ай бұрын
Just one
@alejandrobermejo88222 ай бұрын
Las.medidas me las podéis pasar ? Quiero fabricarlos gracias ❤
@jbx9078 ай бұрын
How many plywoods per baffle?
@mathyouwilliams5 ай бұрын
What kind of driver are you using for these? Would you mind sharing the plans?
@LSCspeakers5 ай бұрын
They are online
@Rik_bS8 ай бұрын
This is a really nice build, lots of attention to detail (and yes I'm ignoring the spray paint 🫣) How many hours did they take?
@LSCspeakers8 ай бұрын
Spray paints the only way to paint hard to access areas, that can’t be done with a roller, gives better results for sure. Not sure on time, quite ahwile.
@TokenTombstone4 ай бұрын
Do it bump doe?
@cornerstreetexperiments8784 Жыл бұрын
Nice build! What speaker did you use?
@LSCspeakers Жыл бұрын
Thoman 18s
@TheMewzak Жыл бұрын
Fantastic build! I love my XOC's. Loaded mine up with 18ps100s and found a swanky 2400w plate amp. What did you use for the bottom resting rails?
@LSCspeakers Жыл бұрын
Some skateboard pvc skids, way cheaper thank “pa” stuff when it’s the same
@thecanarytest9 ай бұрын
What plate amp did you use? I have been looking for one for these but haven't found anything I'd be happy with tbh.
@LSCspeakers6 ай бұрын
@@thecanarytest it’s just a metal speakon plate, you can find them on Ali express
@ggfloy78634 ай бұрын
Eletro Voice T18 💁♂️
@John12mago3 ай бұрын
List of components ?
@lorenzogallaccio5124 Жыл бұрын
Love you project, want to build one, can you share pdf?
@LSCspeakers Жыл бұрын
Just look up xoc1 plans
@eugenecountryman81697 ай бұрын
What was the speaker that you used?
@LSCspeakers6 ай бұрын
Thomman 18
@michasy22218 ай бұрын
What kind of rubber feet is that?
@LSCspeakers6 ай бұрын
Skateboard skids
@79stepanek9 ай бұрын
Hi, what is the diameter of the wheels? 80 or 100 mm. Thanks M.
@LSCspeakers9 ай бұрын
100 I think
@79stepanek9 ай бұрын
@@LSCspeakers I tried putting 100mm wheels in there, but they seem too big there, I'd better look into that.
@TheMazo0211 ай бұрын
is it worth? I am also planning to build these
@LSCspeakers10 ай бұрын
Yes, but a hard build
@jordz101810 ай бұрын
No don't most designs with the rear of the driver out of the box sound horrible and don't even sound like bass much at all build scoops or W bins instead which actually use their boxes
@TheMazo0210 ай бұрын
@@jordz1018 this tapped horn is quite long
@Joey-ir3lk10 ай бұрын
@@jordz1018Dont sound like bass😂, mate have you ever stand in front of a TH118? Your brain will melt, I a good way tho.
@jordz101810 ай бұрын
@@Joey-ir3lk Any Scoop or W Bin/Box design will stomp this design it doesn't matter what Th38184 whatever number the manufacturer puts on it a Yorkville Esp18 or QSC 118 would stomp this any day.
@jeddlawrence9 ай бұрын
no cone correction?
@Amansshed6 ай бұрын
Could you explain cone correction please?
@phatboyzband8319 ай бұрын
This is not Danley th118
@johnhalliburton6219 ай бұрын
Nobody said it was.
@johnhalliburton6219 ай бұрын
It's similar is all
@phatboyzband8319 ай бұрын
LoL it's says it on open Page description and search, Dua