DIY The Mandalorian Helmet Tutorial - FREE TEMPLATE

[@DaveD_223]

I knew that the Mando armor would pull you back out from the shadows! Happy to see you back on youtube doing your thing!

[@Heroesworkshop]

I couldn’t resist. The show was so good! 😎

[@nickd3628]

Thanks!

[@Heroesworkshop]

Thanks so much, Nick!

[@GregoryHaynes]

I love Mando builds! I'll be waiting and watching for each installment you create. You're off to a great start! I didn't know you could sand Kwick Seal with sandpaper!

[@Heroesworkshop]

You can with 1000 grit. Just don’t over do it. It could scrape off. Seems fine with that grit though. It’s never happened so far. It was my only concern.

[@ulfhugud]

Oh man!!! so happy to see you back!! I really really missed this :')

[@themikestermakes]

This is no joke the best foam mando armor I’ve seen in my life

[@Heroesworkshop]

Thanks. It turned out alright.

[@Sam-de6qx]

He's Back! He's Back! Ladies and Gentlemen He's Back! I missed these videos more than I thought I would. So happy right now.

[@Heroesworkshop]

I’m so happy to hear that, Sam. Thanks for the support.

[@MxPotato84]

The helmet looks good!! I can’t wait to see more Mandalorian progress! And thats a cool idea to use floor wax for the shine. Im gonna try that for when I make my own Star Wars armor.

[@Heroesworkshop]

I learned that from Evil Ted years ago. Just never tried it until now. What kind of armor are you making?

[@MxPotato84]

@@Heroesworkshop im making my own design of armor for an original character. I can’t wait for the pandemic to end so cons can return so I can wear it!

[@Heroesworkshop]

@@MxPotato84 I can't wait for cons again too!

[@techsavvyhero]

Great to see you back in action! The Robocop baby interlude had me LMAO...Nice Mando build you did there

[@Heroesworkshop]

The best part

[@MichaelPick]

Awe yeah!!!

[@agustingareta1748]

Man, I missed these videos so much, is great to have you back!

[@Heroesworkshop]

Good to be back!

[@GamingDad63]

And there we go again :) Nice to see you back and nice to see a new pattern to this helmet. All the ones i've found have seemed a bit off somehow, but this one looks more like it. Looking forward to the rest of the build.

[@Heroesworkshop]

Nice to see you again, Sir! Thanks for watching.

[@abrahamsamilpa8304]

Beginner here, how do you measure out the helmet to have it fit on you? Ive made 2 so far and its always a little too big

[@FunkyManIsARainbow]

You probably should try adjusting the size a bit, maybe have a friend place the template on you to see if it fits on you

[@davebuchan3136]

The man the legend and I don't mean the mandalorian ! Been watching your vids since like day dot! Love them all the iron man and robocop stuff

[@Heroesworkshop]

You are a legend of subscribers, Dave.

[@garycarr145]

Where can I download the mandalorian helmet templets

[@izzysan4013]

He's back ladies and gentlemen!!! He's back

[@Heroesworkshop]

And I’m weirder than ever.

[@izzysan4013]

Wouldn't have you any other way!!

[@spectre2776]

Why did it take me so long to find this channel ♥️

[@aprilblackregentart6647]

That’s it. I’m now calling it the Biscuit Armor 😂 Awesome video! Glad to see you back

[@Heroesworkshop]

Hahaha I hope it catches on.

[@sonofskyrim1331]

Great vid Stealth, look forward to the finished build.....10:05 this is the way.

[@Heroesworkshop]

Hahah the way to the asylum.

[@TheSmartin102]

Good to see you back Stealth. Loving the off the cuff intros as well lol🤣

[@Heroesworkshop]

Hi Steve. I’m just gonna be myself. I’m here to build stuff. Not to be professional. 😎

[@TheSmartin102]

@@Heroesworkshop sometimes it’s the best way to be. It’s great to see how this has grown from back when I first subbed all those years ago to now. Keep it up brother!!

[@Heroesworkshop]

Will do!

[@piperreid1063]

Wow!!! So excited to see more videos!!

[@rhysphilp6373]

Great to see you again man you made me feel like getting back into pepakura again with this video

[@Heroesworkshop]

You should. I had to really push myself to start but once I did, now I’m flying through it. It’s a lot of fun.

[@rhysphilp6373]

@@Heroesworkshop thanks man I definitely will, can't wait to see your next video of mando costume

[@Ascalante80]

Cant wait to see more videos of you comming :)

[@Heroesworkshop]

I should have another video update coming next week.

[@themanfromjupiter910]

I am always amazed how the seam lines disappear. I still can't make any of the few things I have made seamless like that.

[@Heroesworkshop]

Watch the tutorial I mentioned at the beginning and end and it'll show you how to reduce them. kzbin.info/www/bejne/rIPVl5aie6mciZI

[@groundbreakerexplore]

I like this so much. Thanks for sharing this video friend

[@RomeoMSong]

UNCLE HANDSOME HAS RETURNED!!!!! lol

[@Heroesworkshop]

hahahaahh

[@gmanfortress7657]

HE’S BACK😆😆😆😆

[@Heroesworkshop]

😎👍🏻

[@gmanfortress7657]

@@Heroesworkshop omg 😆 yesss bro

[@Dizzy_E1]

Hey! Can you use the same template for cardboard? Or is it just for foam

[@Heroesworkshop]

The concept can work. Give it a try. I used to build in cardboard with these same type of files.

[@Dizzy_E1]

@@Heroesworkshop THANK YOU❤️‍🔥

[@CoasterRob]

Will there be moff gideon beskar armour and helmet tutorial?

[@Heroesworkshop]

I have no real interest in making that armor. I really only build things that appeal to me and motivate me to make it.

[@Sithlady-66]

Hi. What kind of glue do u use? Love your work❤

[@Heroesworkshop]

I use contact cement

[@Sithlady-66]

Thx I LL try to translate it in french, for the type of glue 👍

[@LiseteMarques]

For some reason, I cant get the free template for the helmet. It downloads but then the file wont open. Can you please help me? Thank you!

[@Heroesworkshop]

1:23 “If you’re new to Pepakura and foam…”

[@GregChudley]

does a hair dryer work for a heat gun? i can’t afford one right now and want to make do

[@Heroesworkshop]

It can work.

[@rudasill2]

Looks amazing

[@minicraft9972]

Hell yea finally

[@shanedempsey4]

Any chance you’ll do a tutorial for the ODST helmet? Either way it’s great to see you back fam mad love

[@Heroesworkshop]

That project is long done BUT....I will do a tutorial for the ODST helmet eventually. It wouldn’t take too long to do as I’ve built that helmet like 3 times already. It’s in my DNA at this point. 😎

[@shanedempsey4]

@@Heroesworkshop that’d be so dope thanks fam I’ll keep an eye out

[@Heroesworkshop]

Odst helmet tutorial coming in a few weeks. I’ll be filming it this Monday.

[@WoodKnock01]

Awesome vid as usual. Glade to see you back. Definitely gonna have to get that file from you for the mando suit!! Think about build one for Halloween 🎃.

[@Heroesworkshop]

It’s a very easy quick build. Perfect for a Halloween costume.

[@marcelohilariobarbosa4555]

Queria uma vestimenta do Black Panther

[@Beardshire]

"This is not the way" lol. The second one turned out really good, I don't know how you make this stuff out of foam.

[@Heroesworkshop]

Hey Beardshire. Good to see you, again.

[@Spamton-u2d]

Hello, I've been trying to turn this into a PDF so I can size it for my son in Pepakura. Can you help me please?

[@Heroesworkshop]

Why are you turning it into a PDF if the PDO file is designed for pepakura designer? This doesn't make sense. There's nothing to help you with. You clearly don't want to follow the basic instructions.

[@Spamton-u2d]

@@Heroesworkshop Hold on man hold on. I am new to pepakura and know nothing about it, Im just string to build it for my kid. Im trying to size it in adobe so I can size it because I dont know how in pepakura.

[@Lord-Murdoch-69]

Welcome back Stealth. I really enjoyed this installment, as it introduced many things that generate many questions. What made you come up with floor polish? What is the adhesive that your are using? I thought that you were still using hot glue. How are you liking your paint setup as compared to spray cans. I love the biscuits at Red lobster 🦞 Your shop is better than what many of us have. I look forward to the next installment. All the best brother...

[@Heroesworkshop]

I saw Evil Ted use it years ago to as a clear coat. Never tried it until now. I use contact cement. The booth I built is great. Fan is super powerful. I don’t even need a mask.

[@Lord-Murdoch-69]

Is it a specific brand of contact cement, and where did you get it? I'm hoping to redo my facehugger, as the scaling was slightly too big.

[@Heroesworkshop]

It’s barge brand. Go to Tandy leather. They carry it. You can pay at the door at pick up. Get some thinner for it too.

[@Lord-Murdoch-69]

@@Heroesworkshop Bloody brilliant, thank-you so much for this. I'm finding that the hot glue is not so friendly.

[@Heroesworkshop]

I switched to contact cement years ago. It’ll change your life. Watch my in depth tutorial I mentioned in here. It’ll show you how to use it with foam.

[@AriesArriesgado]

Awesome build pare!!! Now Im waiting for your new album in our local music store 😉😁

[@Heroesworkshop]

Coming soon. We already have the covers made.

[@AriesArriesgado]

@@Heroesworkshop don't forget to give me a shout out 😉😁

[@AriesArriesgado]

@@Heroesworkshop Robocop is always your baby

[@jackofspades3845]

Instant sub

[@Heroesworkshop]

Welcome

[@borrowmusic-dm2xh]

THANK YOU THIS ACTULLY WORKS

[@Heroesworkshop]

You’re welcome. Please Like the video too.

[@borrowmusic-dm2xh]

@@Heroesworkshop just did will you make more?

[@Heroesworkshop]

More of which?

[@borrowmusic-dm2xh]

@@Heroesworkshop mando armor

[@borrowmusic-dm2xh]

@@Heroesworkshop i cant open the file i have no idea why

[@evansmomma2386]

That’s sick

[@Heroesworkshop]

Thank you 😎

[@rommellmontejo9204]

is there a pdf format for that helmet?

[@Heroesworkshop]

No

[@yomodojo]

Very cool!

[@stijnj4541]

When is the next video coming

[@Heroesworkshop]

Hit the bell next to subscribe, to set notifications and you’ll know. 👍🏻

[@stijnj4541]

Already done

[@Heroesworkshop]

Then you’re already ahead of the game.

[@Maverick5uk]

Great to have you back Stealth. Excellent build What happened to the Gundam vids? Planning on doing more?

[@Heroesworkshop]

Yeah. Once I have a good routine going in my new shop, I’ll do some gundam builds as well. I always enjoyed those doing those. They allow me to be creative in other ways but similar.

[@Maverick5uk]

@@Heroesworkshop Yeah I loved watching them too. Keep it up Brother.

[@Heroesworkshop]

Thanks for the feedback. It’s good to know they were missed. I’ll add some archived up ones soon. It would be a shame to not have those back up. I was proud of them.

[@mutzel0780]

What thickness of Eva foam did you use? :)

[@Heroesworkshop]

8mm

[@mutzel0780]

@@Heroesworkshop ah ok thank you :)

[@OperationSpider]

Looks great! Will you make the bandolier and belt too?

[@Heroesworkshop]

Yes. I’ll make those too.

[@OperationSpider]

@@Heroesworkshop Will that be foam as well? Also weapons like the rifle?

[@Heroesworkshop]

I bought some synthetic leather to make some quick belts and use for other details and stuff. I’ll probably make the pistol. I liked that the most from the show. Not gonna go too crazy with this build. It’s just a quick build to test the foam files. 👍🏻

[@elitecpudoc329]

Nice job

[@billypitcher6894]

Please do more Star Wars builds

[@TheSuperRunner]

My Man

[@Tk-yb2lt]

Could you pls make a pdf for this???

[@marsmanstudios3076]

Nice job!

[@randy8897]

loving your work, have you thought about doing a ''gears of war'' helmet ?.

[@Heroesworkshop]

I would love to do that. My goal is to do something every week. So that could come eventually.

[@randy8897]

@@Heroesworkshop and i'll pay for the shipping ....(as long as i win lol)

[@Heroesworkshop]

Fair deal

[@randy8897]

@@Heroesworkshop about 10 years ago a work friend of mine who was an amazing leather worker started doing cos play and agreed to do a G.O.W. outfit for me but had an accident and cut through his tendons and had to give up his hobby and job ,i was so gutted for him because he was like you ,an amazing creator

[@Heroesworkshop]

That’s awful. Sorry to hear about your friend. 😞

[@subinaykalya4912]

what size should I print these if I am a 12 year old boy

[@Heroesworkshop]

Watch the tutorial I mentioned at the beginning of the video to learn how to use Pepakura.

[@subinaykalya4912]

@@Heroesworkshop ok thankyou

[@kikiman2002]

can you update your link? Its not working for me.

[@Heroesworkshop]

What’s not working exactly? The link works. Did you read any of the info on the download page on how to use the Pepakura file before asking?

[@MrRjgarza]

great job!

[@Heroesworkshop]

Thank you! 😎

[@mariachanson]

I like the intro.

[@Heroesworkshop]

Thanks 😎

[@ulfhugud]

Stealh: Have you suscribed? Me: Dude... I suscribed 10 years ago when the channel was still called The Hero Tutorials and you made that break-dancing Ironman

[@Heroesworkshop]

You are the ultra old school OG subscriber.

[@ulfhugud]

@@Heroesworkshop As old as they come

[@izzysan4013]

Same lol 😅

[@Beardshire]

Spiderman disliked this video because you mentioned that. Break dancing Mando next?

[@valyanimations4019]

Oooh yesss!!!!!!

[@PJ-cu5od]

Buying this from u!! Good videooo

[@Heroesworkshop]

Thanks, PJ

[@herminiatrejo3716]

How can I download the free template?

[@Heroesworkshop]

Really? 🤦🏻‍♂️

[@MrDraquo]

Hey Stealth! Good to see you back man. Happy New Year! Gotta question for you: Do you know if there are any Black Panther suit pepakura files? I've seen plenty for the helmet, but none for the suit/armor itself. We love ya man, keep up the good work 😁👌!!!

[@Heroesworkshop]

I doubt you’ll see black panther. It’s just a fitted suit really. Sorry man. Haven’t seen any. You’ll need a spandex suit or something with a pattern on it I think.

[@MrDraquo]

@@Heroesworkshop I was afraid of that. But I'm grateful to you for providing confirmation on this. Even though it makes me sad 😩😩😩!

[@jessopjessopjessop860]

This is the best Mando helmet that i've seen by far. All of the others are too short and or rounded.

[@doombringer35]

Love it

[@bionicfighter7816]

Stealth The Great has risen to make another helmet in order to satisfy his followers of the platform known as KZbin

[@Heroesworkshop]

Hahaha Nice work, Maki. Well said.

[@bionicfighter7816]

@@Heroesworkshop 😂

[@mad5687]

​@@Heroesworkshop Do you have a link for the helmet pattern?

[@3rd_Tower]

What thickness is the foam?

[@Heroesworkshop]

8mm

[@3rd_Tower]

@@Heroesworkshop thank you

[@someone1.0]

I have no idea where i can find foam so i'll make it out of cardboard and hope it will work 😭

[@Heroesworkshop]

I linked some sources on my website. You need to take some initiative when doing this hobby. heroesworkshop.com/pages/cosplay-supplies

[@someone1.0]

@@Heroesworkshop oh! thanks !

[@haydenthomas7257]

My advice if making out of cardboard is to go over with fibreglass sheets and resin, will harden it as well as water proof it

[@513MRSHADOW513]

"Kept you waiting huh?" - Stealth probably.

[@Heroesworkshop]

Pretty accurate, I’d say.

[@bionicfighter7816]

watching this while building the Mandalorian rifle

[@Heroesworkshop]

That’s amazing! I need to see that.

[@vibn7643]

Nice job haha

[@Heroesworkshop]

Looks like it works. Lol

[@tonycosmaker492]

grande mestre show

[@Heroesworkshop]

Thank you, my friend.

[@ulfhugud]

jajajaja feeding the Robocop ♥ jajajjajaja

[@shoob5315]

hi

[@Heroesworkshop]

Hi

[@ziraakk]

Been here since you told us to mix the PVA Glue and Water till it's a milk-like consistency. Then you proceeded to drink it 😂

[@Heroesworkshop]

It’ll build strong bones.

[@bionicfighter7816]

@@Heroesworkshop 😂

[@Red-yn9fv]

Noiiice

[@WyldstaarStudios]

Admittedly it's been a while since I've seen Robocop, but I'm pretty sure he eats baby food rather than metal screws.

[@Heroesworkshop]

He was picky that day.

[@shazamfederic9389]

10:14 🤣🤣🤣🤣

[@manassatam9189]

Thanks for free template o/ everyone else is juicing them for bucks

[@Heroesworkshop]

There’s nothing wrong with selling templates.

[@JGDeRuvo]

Insert obligatory this is the way comment here.

[@Heroesworkshop]

Had to be done.

[@Organs1]

I am commenting for support, do not notice me

[@paulrobinson9080]

Nice job

[@paulrobinson9080]

Cutting the foam straight is harder than it looks