Diy Tools Hacks

Chain Wrench DIY Tools

[@kevinmahaley4916]

Or...just hear me out.....get a wrench 🤯

[@schlomoshekelstein908]

these are for iron pipes and shit you can't get a wrench around because they're round. idfk why he made it so small and demonstates it on a nut lol

[@BukitMan]

Nifty end of the world type shit

[@anzai_yuuki]

I wanna know more about the threads...

[@shootingstar5718]

@@schlomoshekelstein908 just use chain oil filter opener more convinence,why go the hard way if have the easy way

[@falcon5751]

@@schlomoshekelstein908 you have wrenches for that... Pipe wrenches 🤯

[@joshuanicely8722]

Jesus Christ....I can't wait until Funk FPV sees this one!

[@thusarasampath3685]

Wada oi

[@Anthony-dw8bg]

I was thinking the same thing

[@codygooch510]

This one ain’t bad tbh lol

[@jacklegminercanada3866]

​@@Anthony-dw8bg same

[@rustybritches6747]

Lol I was thinking the same thing

[@Роман-р6ч8ж]

Так вот древние люди мучались, но потом инженеры придумали гаечный ключ ☝️

[@hypnomarket8649]

Накидной

[@АртурАлиев-ж5п]

Розводной и газовый

[@ДенисДемидов-ь1э]

Головки торцевые

[@ILLUMINATION313EVO]

Very well spoken

[@ШматкоЖорик]

Так себе затея. Цепь слабая

[@8953Азретов]

Это называется когда коту делать нечего он яйца лижет.Для гайки умные люди придумали ключ,не бдагодарите🤣🤣🤣

[@chasecollins3263]

Everytime I watch one of these KZbin "DIWhy" life hacks, I always have this little voice in my head saying: "Finally, this time I won't be disappointed". I still have yet to not be disappointed.

[@ЮрийГриев]

Покрасить в зелёный цвет, и положить в траву, что б не кто не нашел.

[@gsnyder3328]

That is the funniest comment I have read in a while, thanks!

[@jamesmoore9422]

All that prep work to remove a loose nut. 10/10

[@simonefusco4275]

se no se mi devo se se9999 se no se

[@Cocarcodex]

There's no way making this improv wrench was less difficult than the nut removal. There is no hack here

[@Mtg_MoBrocks]

“Channel locks have left the chat” “Literally any tool that’s adjustable has left the chat” “Chisel and hammer has left the chat”

[@vitaliyivanov442]

Зз ззззззззз ззз ззззззззз зззз

[@kjpierson1152]

For this example. Fingers have left the chat.

[@purohitramesh76]

@@kjpierson1152 hhhhhhh

[@kjpierson1152]

@@purohitramesh76 LLLLLLL

[@427Arbok]

For when you have no adjustable wrench of any kind, no actual chain clamp, no kind of universal wrench, but you do have a bunch of hardware, a power drill, and a perfectly sized drive chain. Very practical.

[@A_Random_Ad]

Can't wait for our favorite tool reactor to make a video on this

[@billycaudill8600]

neither can I lmao

[@anichols5845]

Me neither

[@fk2neat]

i was thinking hes making a oil filter wrench or sum n was like ok that makes sense, but then i realized its too small and couldnt figure out why he put the two nuts on then the next clip came and i facepalmed fr

[@carlosdantecastrolore5334]

​@@billycaudill8600 ñ0b

[@povertylevelphilanthropy1524]

Quarantine boredom at it’s finest. My husband got so bored during the early pandemic that he started making grills & smokers out of old propane tanks. They’re actually really cool, work really well, and people always ask him to make them one.

[@justsomedude4469]

Damn dude you should sell those. I've never seen at tool that could undo nuts before. That's so cool 🦶

[@Bobsmith-yf9oy]

Agreed, but be sure to patent it first so no sneaky thieves take your inspiration...

[@joeflores7358]

My wife undo mine ☹️

[@Priority57]

Good old fashion wrench works for me

[@borntoride7180]

То есть взять простой или даже газовый ключ, это уже не работает?

[@ДмитрийМитягин-х9щ]

У конструкции нет жёсткости. У доктора есть разбор подобного.

[@СергейДорошков-и1н]

Коту делать нечего,он яйца лижет.

[@muhammadalyas4476]

ڑ

[@Sergios37]

Точняк

[@AntyHlobalist]

Но на практике гайки встречаются в ограниченном пространстве,где и обычный ключ не повернуть....или торцевой или накидной

[@oscarmachuca4688]

Ingenio y Creatividad de un buen ser humano. Gracias MAESTRO

[@mbahmedi9277]

Kreatip,sekalisodara,itu

[@pedalshredders1401]

When you smoke a bowl to solve your one missing wrench problem

[@robertblack5520]

And make a one size fits all wrench

[@nickhosford7801]

Wrenches are hard to come by where you are, I take it?

[@clydem7899]

Well... he used a long nose plier to tighten the square nuts.....

[@kjpierson1152]

Where we're going...we don't need no wrenches...

[@ТарасХоменко-у2о]

Вызывайте доктора, у нас тут пациент. А если серьёзно то гайку, которая от руки откручивается, эта приспособа открутит проблем. На большее либо прочности цепи не хватит, либо это будет соскакивать с гайки.

[@grubbs517]

Nice to see McGuyver got his life back on track and recording hacks again.

[@русланскляров-ю8ъ]

Это решит проблему ! Иногда гайки " прикипают " к болту , и без помощи специальных инструментов , смазки , механической помощи или нагрева не обойтись ! Эта вещь реально сможет помочь решить проблему ! p.s. её сделать под силу абсолютно всем , и причём без затрат , чем и займусь в ближайшии дни ( вот только цепь нужно будет поискать )

[@СерегаМуратов-ч3щ]

Всегда удивляло то что у человека есть дрель,пассатижи,молоток,керн и тиски. но нет рожкового или накидного ключа😂

[@hematogen50g]

Ajustible wrench already exists.

[@jlg5798]

That’s why it’s called a hack

[@johnwilliamrai2916]

Very unique idea for mechanical technician. I really appreciate you thank you so much

[@franciscoalvarado.m.1909]

Excelente idea una herramienta para varias medidas y cómoda y más segura de utilizar..felicitaciones amigo

[@Locateson]

Someone has invented pliers and wrenches for that

[@Gar99]

That nut is loose and your contraption will obviously work Try loosening a bolt thats tightened down And then you see it spinning

[@blitzegron4848]

Wouldn't an adjustable wrench be easier?

[@wayne251975]

If the wing nut were turned inward it would have better strength resisting tension

[@impiyakhenyamande4805]

Love this. Easiest oil filter tool ever

[@ДмитрийКолесников-с6ф]

Осталось покрасить и бы бросить.

[@jesusdanielusme4423]

Excelente enseñanza 👍 👏

[@Alex_Vinogradov]

Да тут все 250 Полуляхов из 250.

[@ПапаКарло-г6я]

Аыбросить на...й

[@ПулатТемиров-ц7ю]

Это пригодится когда руки не лезут. На примере снять нижний крепления стартера

[@appeasement3678]

Пулат не дашь взаймы?

[@Dobryk44]

Такое хорошо использовать на непредсказуемых нестандартных гайках где крокодил неподлезет или магазинов нет,а руки и голова есть)))Нестандартный метод выручает...как палка что раз в жизни стреляет.🤣

[@fulf]

For me a wrench is easier to buy than a winged nutt.

[@badger25802]

Right I’m weighing up the cheaper and easier option do I have a :- Bike chain Wing nut Punch down tool Hammer Drill bit Drill M6 nuts Vice M10 nut And what would be the torque strength of this home made tool I just had a brain wave I’ll go and buy or borrow an adjustable spanner or the correct sized spanner

[@l4so102]

Y-you made an adjustable wrench that to at least an hour

[@jerryatric7978]

I can tell by the fingers this man has called my phone 36 times this month

[@bucketmouth7705]

What’s next? We turn a flat head screw driver into a chisel?

[@PawsumGaming]

This is genius.

[@zacharywoudstra5917]

Used a flat head as a chisel as a kid once. Got the bollocking of my life from my dad. Never made that mistake again.

[@alanserafim4602]

Em caso do mundo ir para merda. Isso realmente é útil

[@notpoliticallycorrect4774]

What did you use to tighten down the clamping bolt?

[@Ильдус-г6я]

КАЖДЫЙ СХОДИТ С УМА ПО СВОЕМУ . ДАЙТЕ ЕМУ ГАЕЧНЫЙ КЛЮЧ .

[@อินสอนโกวรรณ]

** Hb

[@ГендольфБелый-и9с]

Желательно сразу разводной. Дыба более не маялся херней всякой)))

[@johnsonbosh978]

@@อินสอนโกวรรณ gh ghr pr tu kya kr rha tha na ki tu to to be able to to the same thing to the world world of of project to be able?

[@davidsmith2562]

Amazing news! You mean I don't have to use a wrench anymore! I can just make one of these? 😂 lol

[@muddyhotdog4103]

it's never a reasonable DIY when you have good tools and use them to make lesser quality tools

[@rexsteel1094]

A crescent wrench is 99. Cents at harbor freight The time you got in that blows 99cent away

[@andyanderson6957]

What a colossal waste of time!

[@cornpop7805]

Try making fingernail clippers and a fingernail brush.

[@iTHINKnothing1234]

If Mr. T made you a wrench out of these bits and pieces, you'd treasure it.

[@brettgalloway7576]

Or I could just use a wrench or socket that I paid good money for

[@steviesbadtv]

Did anybody else do this when they were a kid?

[@GhostlyFog88]

Куда, Доктор Дью подевался? Для него тут, пациент!

[@ЛёхаМихайловский-и2п]

Да тут если честно смотреть не хрен 200 полуляхов из 200.

[@tomatoes3]

Wow, but why not use a wrench ?

[@0drik74]

Этот барашек сделан из пластилина, никакого усилия не выдержит, плюс ослаблен отверстиями и резьбой. Покажи что откручиваешь закисшую гайку.

[@thegreatrelease4539]

What situation are you gonna be in where you won’t need the chain that your using all while having access to the rest of the tools except the wrenches.. lol looks cool though

[@DenSoloDP]

Зовите Дохтора, тут Нобелевка не иначе! 😆

[@assassinbloodshed8193]

Как ты думаешь какое усилие ты должен приложить, чтобы ты смог открутить ржавую гайку, твоё изобретение не выдержит ни какой нагрузки, оно просто разорвёт барашек, старайся лучше

[@Rensville]

Me tardo más en hacerla que en vez de ir a comprar una llave española o Perica 🤦🏻‍♂️

[@brett3522]

It only needs to be big enough for 10mm. Everyone is missing 10mm.

[@UGFluffyTurtle]

When I saw him putting a wing nut on the chain, I thought he was gonna be stupid enough to use it as a legitimate fix, but nah, he did something even more stupid.

[@ВоваДоня]

Так.... Стоп. А накидной ключ ещё не придумали?

[@frogzet502]

Bruh it didn’t even seem tight enough to need a tool-

[@RCGshakenbake]

I could actually use something like this to hold a drive shaft while I removed an impeller off of a pump. I'm a pump mechanic. I use a chain wrench but sometimes it slips off. This could be useful. I will make one and test it.

[@HalfBurntCarpetWeed]

This might work for an oil filter. As long as you don't plan on using the filter again cause the chain might dent it up.

[@averagequan8975]

Lmao idk what he was thinking when he made this video.

[@72gunslinger]

So you don't have pliers,wrenches,vise grip,channel locks or a multi tool 💀 ☠️

[@larrypatterson3839]

Hobby, great Real life use, that bolt will bend faster than you can say, "Get a wrench".

[@vijayamtv7448]

నేను ఎస్ ఐ క్వాలిఫై అయ్య కానిస్టేబుల్ ఫెయిల్ అయ్య దానికి దీనికి ఏం సంబంధం ఈ ఛానల్ వాళ్ళు కావాలని చేస్తున్నారు.

[@sergeymakarov4333]

Блин компот, у нас что гаечные ключи закончились....

[@geemac7267]

My God, this man just invented the wrench!

[@PEYates]

Thats kind of cool! Now use it everyday.. on stuff that isn't already broken free or easily accessible. Lol

[@erikrosasdelangel9209]

Y no era más fácil usar una llave de media y dejar de perder el tiempo jajajajajajaja

[@ericgroucho1761]

Chance are if you don't have a wrench you won't have a chain a drill and a butterfly nut

[@enriquezueco5462]

Si el sabado me falta la llave para una tuerca, cojo la llave inglesa o me espero al lunes para comprar la llave en la ferreteria.🤦‍♂️🤣

[@jasonandrews4855]

I think a trip to the dollar store for a adjustable wrench would be quicker,easier and cheaper

[@vvolkun]

Не, ну тут явно все 250 полуляхов

[@ЕвгенийТ-к9з]

У меня для этих целей, накидной ключ есть.

[@luzenildodesousa1293]

Show,valeu mesmo.

[@sgljruss]

Just, why? You obviously have the right tool for the right job. It would have been impressive if you made the tools to make this tool.

[@АлександрСолдаткин-ф3ц]

Закисшую гайку этим не отвернеш.

[@СуперПлатонКубикиРубика]

Неужели так сложно было перед видосом ногти постричь

[@mrgodsir6172]

Better than most hacks and it at least has creativity but uh just buy a wrench set

[@pureinvictusgaming4188]

Maybe he can help with my problem. I want to join two planks of wood together with nothing but a pack of nails, a large iron ball and an apple

[@fokieinmybookie9621]

The amount of likes is frightening

[@ВасилийАндреев-д2д]

А как добывается электричество? При чём тут экология? Всю норвегию поимел илон маск

[@PawsumGaming]

Well why use a wrench or pliers when you could waste your time building this contraption....

[@ВАЙшлак]

Эту гайку можно и пальцами открутить)

[@randmayfield5695]

Only as strong as the material around the holes in the wing nut. Soft metal...not gonna take too much tension.

[@liebre4212]

на той же помойке где он все нашел, можно было и ключи гаечные поискать

[@ReparationCarrosserie]

Adjustable wrench already exist

[@WanderingMiqo]

Meanwhile, me with a $2 Harbor Freight wrench...

[@filomenorodriguez8736]

-g

[@timmkinkslt8863]

А тоньше крепление к ушам барашка нельзя было подобрать.....хорошая нагрузка и все рассыпется ваш дермовай

[@Bobsmith-yf9oy]

Or, weld a screwdriver to it and turn the nut off that way. No need for a drill, pliers, centre punch, etc.

[@alanporch8320]

With a few more modifications, I can make my dog a new collar. I'll add some rhinestones too. Only problem, I won't be able to ride my bike for a while.

[@thewildpeople7799]

Just weld one nut to the chain instead...then thread the bolt thru it....its more durable that way

[@oseiasmuller5322]

Essa unha já levou muitas marteladas kkkk

[@maximusis100]

Зачем изобретать то что уже изобрели,,,,,, называется кльчь инструмент,,,,

[@Dotskiedong]

Very nice bro

[@rickszabo4312]

I think the Professor on Gilligans Island wouldn't even thumbs up this tool

[@Danielbright1978]

This guy probably thinks socket sets are for dummies lol.