DIY Twin Low Loft Bed

[@chrism4919]

Enjoyed the video, just what I was looking for to upgrade my kid’s bed from a toddler to a twin size, plus I like that there is plenty of space for storage under the bed

[@kiennguyenthe9898]

This is a valuable addition to my woodwork collection kzbin.infoUgkxkNYRBJuiJ6EwD-tQSAlxg0eFKsnR2cgz I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

[@carlosborja904]

Literally on a binge watching your videos, excited to see what you bring in 2022 👍

[@marcusfowler139]

Used your technique to build a bed. Had access to a wood laminate to overlay the side rail (length) and the headboard / footboard (width). Beauty

[@Woodbrew]

Love the simplicity! Looks great!

[@MrBuildit]

Thanks so much for the love, Dylan

[@locddenturedandblack5569]

Hello , love your tutorials. I was wondering if I could get a material and cut list? Thanks for your help.

[@roberthawk-yw2iq]

Did you ever get a cut list?

[@redSectorA]

Pocket holes for the legs? Will that support a, ahem, husky adult?

[@forfuxakes6814]

No they won’t 😳

[@marcelw6440]

Gonna build 2 of these over the next week.

[@MrBuildit]

Oh awesome.

[@grace-jy6kk]

same! 😂

[@anam.aria.]

Hi, did you build the beds? 😊

[@fabiannino4106]

Gonna make 3 of these. I have all the tools. Been taking a break from woodworking this will be a nice way to start back up

[@eXdXgXe4life]

I would have liked to have seen a "durability test." my 4 year old would love the design but could it withstand the constant cannonballs on it and leap frogs off it?

[@MrBuildit]

Im not jumping on the bed. Grown man

[@ACR4008]

Mr. Build It Why would a grown man build himself a twin bed? Or design a child-size bed that might not stand up to...a child

[@renameagain5808]

@@MrBuildit you could have answered that a bit nicer, ngl.

[@shammasabdussalam]

Gotta say that was pretty rude from Mr. Build It

[@renameagain5808]

@@shammasabdussalam yeah

[@grace-jy6kk]

When you glued the wood together would it work the same if i had one solid big bit of wood? planning on making this 👍🏻

[@NekoleJ.]

Hi...can u giv me the measurements of the bed? I waa kinda confused from the video. Plz in none experience in woodworking language lol. For the headboard...how wide it is from left to right, how tall from top to bottom. The footboard...same The planks... is wat i call em or the pieces of wood inside the bed. How many u put in there? How high is the bed from the floor as far as the space area under the bed?

[@luiscarrillo2910]

Thanks for the video. My son had an aluminum bed frame that broke so I went off the video to build him a new one

[@MrBuildit]

That’s awesome. Glad it helped.

[@blogerongrob3058]

Hi, is it sturdy enough? i feel like it needed more support.

[@hwy2hell161]

Thanks for the video, do you use treated or untreated wood? Sorry newbie here lol, though plan on making this, also I don't have a joiner, would that be a problem? Thanks

[@MrBuildit]

you can use untreated lumber. (treated is for the outside) if you do not own a jointer, just take your time to find the straightest boards

[@hwy2hell161]

@@MrBuildit got it, thank you again 👍

[@flexglory7879]

so simple , so satisfying to watch 💖

[@cyndicaserta7096]

Why not take those corrugated sheet offcuts and fix them (using cross battens) along the back wall at ground level ?

[@alcolavista-22]

I think this is awesome.. simple cheaper stronger nice stained color...instead of buying $300 ikea bed I’ll go for this one.. hit the like and subscribed 🇺🇸🇨🇦😍👍

[@Givulinovich]

I wonder how to extend your elegant bed to a queen size. Would the slats need center support?

[@MrBuildit]

Givulinovich yes, for queen, you would need center support legs.

[@rchavez5056]

I recently made 4 full size beds for my kids, and they needed a center support.

[@barrazafamily7010]

I didn't see this on your tool links, but what did you use to hold your bed up when you were using your spray gun? Thanks :)

[@Lic.en.derecho]

How do I put the headboards studs together?

[@marieboschman1311]

Is there a way to make a twin bed frame without glue?

[@Trihexian]

Awesome Build really liked it, I tried to use your link to plans and tutorials but it's not working for me, did you change the link? Or is the webpage no longer up and running?

[@roberthawk-yw2iq]

Do you have a cut list?

[@lyrad1992]

Wud it be stronger if u built it with more joints and half the screws?

[@bsmiller1234]

You have a cut list?

[@jennyts2001]

How do you get it to not wobble?

[@nicolejenks1504]

So what was the total width length of the foot board and head board? What was the length of the side frame rails?

[@shooksings]

Here from IG! Nice work man 👍

[@MrBuildit]

Hey!! thanks so much for coming over. Appreciate the support

[@annatsiraki3642]

Excellent. How can i have plans?

[@victortimez7912]

Can you do a king size bed?

[@lukehobbs3177]

Is there going to be a follow up on the forge build?

[@MrBuildit]

Luke Hobbs yes

[@lukehobbs3177]

Great! I’ll be looking forward to it. Im a fourteen year old just getting into toolmaking and I think it is a good single burner design. When adding the refractory material I would mix in some steel wool to help keep it from collapsing.

[@MrBuildit]

right on man. good for you for working with your hands

[@tammyboggs346]

How much material and what kind of did you use?

[@TJSWOODWORKINGSHOP]

Awesome my brother I like this project two good job later :)

[@MrBuildit]

Thank you, sir

[@jlrecoder1]

I like this bed, might go this route but in toddler size for my daughter. Great video!

[@ejd12]

Confused. Why not cut the plywood to fit over the edge support. Screw it in to support and pocket hole into the frame

[@Jordanwoodworking]

Great simple design

[@MrBuildit]

Really appreciate the love, man

[@adamcturnbull]

The entire structure is supported by 12 screws? Why not put a 2x2 across the headboard and footboard to lend extra support than just screws? For my kids this is fine until they start jumping....and they will. Maybe im wrong. I like the design though. Handsome.

[@tedkeil2018]

Had the same thought, my grandkids will definitely jump on it, plan on attaching rails differently

[@fabiannino4106]

They gotta learn not to jump somehow 🤣

[@dustindamesworth]

Did you build the night stand?

[@shutupsavannah2195]

Why not do any wood glue clean up before drying? What is the reason you wait 24 hours and then sand the headboard?

[@ashbbeyamo6946]

Love it very simple...

[@rafiealam]

Will this work with mdf?

[@bextread6617]

Where do you get the music for your videos

[@MrBuildit]

epidemic

[@jacobcarrow2851]

like the build but not a huge fan of the stain. Probably looked better in person

[@OnRappel]

I guess Peter McKinnon is your inspiration?

[@3DCHome]

Nice channel, thx

[@d3m1tar]

Thats good but its easy for you because you have all the tools ....professional tools..

[@IIC4NCELEDII]

Thank you

[@maximoreds]

All i need is to either buy all of that equipment or just buy a twin bed frame 🤔

[@way2soccer399]

Where do you work .(like which company )

[@DavidMTim]

You didn't tape up your edges before the glue up - I thought that was your new thing.

[@MrBuildit]

cabinets, yes

[@david_kg]

Kids are definitely not jumping on that bed.

[@cristobalmartinez8447]

For the next video, explain in Spanish too for the community in Latino America please and thanks hehehehe

[@SMee67]

Good job, man👍 Looks quite sturdy👌

[@MrBuildit]

Thanks Bill, Meant to store 16" boxes under the bed as well

[@SMee67]

@@MrBuildit sweet, you building those as well?👍

[@MrBuildit]

no ,i figured just use plastic bins

[@SMee67]

@@MrBuildit fair enough, man👌 time spent better elsewhere👍

[@justbeachydesigns]

Yea but how much do all the tools cost lol

[@karribabi]

woodwork podium .

[@carlosmorrone1680]

Cadê a cola são Paulo abc

[@cruzcruz7685]

Oye.carnal eres.Muy.bueno.en.lo.Que.ases.de.verías.traducir.para los.Que.no.masticamos el.inglés.y ganas.más.suscriptores.Jajaja.

[@Yonick1999z]

Callate

[@d-taylorpocketbullies2949]

So u actually need 11 2x6 boards

[@fabiannino4106]

You might have missed the part in the beginning where he said you cut them in half

[@AbrahamRomney]

Why not just rip the plywood to the right size and use that as a base instead of slats? I don't see the benefit of making all those cuts.

[@ronnieking3848]

Mattresses need to breathe. You cultivate mild when you cut off any air circulation.

[@arrowlandrj]

Spare bed

[@josephg4924]

👍🏻

[@malaatanna4412]

Dosent make sense cannot see overall look properly

[@gracielizada1991]

a

[@bipulbordoloi2195]

Bapeor murtu

[@HUD404]

Brutto come pochi...

[@samchaussee]

You can build this for $150 as long as you $1500 worth of tools.

[@creektilghman9187]

You can use woodprix, it has the best handbooks and ready instructions. You can learn much from them and make it yourself.