DIY Universal Circular Saw GUIDE - Multi Size

[@ELCADAROSA]

Very nice! This is the first saw guide I've seen that is adjustable for different saws. Great idea!

[@GreenSaw]

I'm glad you like it. Thank you for your nice comment. Sincerely yours...

[@ELCADAROSA]

@@GreenSaw , I downloaded the plan and have started building it. A few measurements that seem to be missed on the plan are: 1. @05:00 - Between the centerline of the three circles and base of the unit. I'm guessing about 150mm. 2. @05:30 - The size (length/depth) of the Hex Insert Nut. I'm guessing less than 18mm. 3. @05:40 - The length of the bolt that goes through the handle. I'm guessing 30mm. 4. @06:00 - From the base to where the horizontal brace piece is installed. Yeah, I'm a bit of an engineer, so measurements matter. I'll be using your guide when I'm building cabinets for my boat at the marina. Using it will be easier than transporting my miter saw and not-so-portable table saw!

[@lynardburt5992]

I laughed out loud when motor hit handle. I think all your shop tools are interesting and wished I had found you 5 years ago. Now I’m too old to make my shop copy your’s. You are very good, and inventive in your shop. I would be your grasshopper if I had time left.

[@seanpatterson1609]

This is a brilliant design. Thank you for sharing your work.

[@intertekrus6179]

Отличный упор. Обязательно возьму на вооружение и сделаю себе такой.

[@Pyatigor4anin]

Да чёткая тема. Мастер-что тут ещё скажешь....

Muito obrigado pelo belo trabalho apresentado...congratulation! Londrina City, state Paraná, from Brasil

[@михаилроманов-ф7ч]

Отличный угольник. Спасибо!

[@MrElsindico]

Excelente proyecto, y muy fácil de hacer siguiendo los vídeos.....sigue así que tú trabajo es inspirador

[@ИгорьЧурсин-у6з]

Направляшка очень даже неплоха, но тиски просто великолепны!

[@bigowlforest9361]

Отлично! Самая лучшая конструкция и при этом очень простая. Можно использовать и с лобзиком, не только с циркулярками.

[@laborges4535]

Muito bacana, serviço muito caprichado, tudo feito a mão e na madeira. Grande habilidade! Parabéns!

[@lesneilson5632]

excellent loved the adjustable stop well thought out

[@youtukang]

Yeach 👍👍👍

[@GreenSaw]

I am very glad that you like it. Thank you for watching and commenting.

[@mhamedlaidioui7582]

Merci de partager avec nous ton expérience et ton savoir-faire c’est toujours un plaisir de suivre et apprendre de tes vidéos merci beaucoup mon ami et bon week-end 👍🙏👍

[@GreenSaw]

Merci pour ton beau commentaire. Je vous souhaite des jours sains.

[@aggromov1]

Руки - золото!

[@Transtaganu]

This project looks very interesting. I can't wait for the pdf plans to be available.

[@GreenSaw]

Glad you like it. The PDF plan will be available for download soon, please follow. Thank you for your comment. I wish you healthy days.

[@Transtaganu]

@@GreenSaw Thank you very much, and thank you for your work at this channel.

[@Transtaganu]

@@GreenSaw Thank you for making the plans available.

[@ferdinandbasques7715]

ESTUPENDO TRABAJO.. TRES BONNE IDEE. FELICITATIONS PRISES DE VUES TRES CLAIRES 👍👍👍....👏👏👏..🙏🙏🙏. UN BRICOLEUR MARSEILLAIS

[@GreenSaw]

Je suis heureux que vous ayez aimé. Merci pour votre commentaire.

[@TKM_kayu]

Good IDEA brathers 👍

[@TheHugguan]

thank you for sharing you brilliant idea

[@MCsCreations]

Fantastic work, dude! Really great jig!!! 😃 Stay safe there with your family! 🖖😊

[@GreenSaw]

I am very glad that you like it. Thanks for watching and commenting. I wish you healthy days.

[@alexanderkirillov8149]

Отличная идея! Благодарю!

[@GreenSaw]

Рад, что вам это нравится. Спасибо за ваш комментарий. Желаю здоровых дней.

[@SER-spb]

Спасибо!

[@brianillsley4376]

Hi Great video, cant seem to find the pdf link on your site. I just seem to be going round in circles

[@GreenSaw]

Hi, My website has the following note: Files can be downloaded for free by GreenSaw KZbin Channel Members first. It can be downloaded free of charge by subscribers and everyone after a while. Check again later please

[@Transtaganu]

Brian, I'm also waiting for the pdf to be released.

[@ravlgainullin103]

Классный проект,просто супер!Спасибо!

[@GreenSaw]

Рад, что вам это нравится. Спасибо за ваш комментарий.

[@5phutsangtao-iQ]

hello i can learn useful things from you

[@GreenSaw]

Hello, Thank you for your comment. I wish you healthy days.

[@andrewsabitov4306]

Так-то ничего особенного, полютуба подобным забито, НО(!) за то, что показали косяк с ручкой однозначный лайк!

[@andreoliveira3398]

Very clever! Nice work! like a lot of funny baby crying and laughing sound...

[@GreenSaw]

Glad you like it. Thank you for your comment.

[@aboveaveragejoe6291]

It looks like you're using a Bauer cordless drill,if so how do you like it?I really like my Bauer impact driver, it's unstoppable with the 5ah battery in it!

[@Transtaganu]

I bought a Deko cordless drill on ali express with the 16V battery, and i'm very happy.

[@GreenSaw]

Hi Joe, I don't have any Bauer cordless drills. I am using a different brand.

[@aboveaveragejoe6291]

@@GreenSaw ok, thanks for the response, your drill looks just like a Bauer, sorry

[@GreenSaw]

@@aboveaveragejoe6291 I have 3 Einhell cordless drills (red). There is also 1 bosch (blue).

[@genehudson665]

i LIKE THE DESIGN

[@joseantonioferrari3979]

Meus parabéns este é o melhor gabarito que vi até agora para Serra, vou fazer um para mim usando à sua idéia muito obrigado um forte abraço.

[@GreenSaw]

Estou feliz por ter gostado. Obrigado pelo seu comentário. Meus outros vídeos também são muito legais, dê uma olhada neles também.

[@joseantonioferrari3979]

@@GreenSaw sou inscrito em seu canal já assisti quase todos os seus vídeos um abração.👍👍👍👍

[@domenicopapa971]

sempre bei progretti, bravo😜

[@GreenSaw]

Contento che ti piaccia. Grazie per il tuo commento.

[@pkgambhir6296]

Superb👌👌👌👌

[@fredord5042]

Very handy I'll give it a go thanks

[@GreenSaw]

Glad you like it. Thank you for your comment. I wish you healthy days.

[@johnewaynedocarmooliveira7602]

Você é o cara! Parabéns e obrigado!

[@miguelvento682]

Gracias, que Dios te bendiga

[@nonicksquibedo3679]

Fantastic work. 10 start for me

[@GreenSaw]

Glad you like it. Thank you for your comment.

[@alcantarahenry8165]

Nice

[@marcenariahobby7pallet]

Parabéns show de 🇧🇷💯

[@brasil761]

Supper Führungswinkel, kann sicher auch für Stichsäge und Oberfräse verwendet werden.

[@GreenSaw]

Froh, dass Sie es mögen. Danke für deinen Kommentar.

[@GreenSaw]

You can find all dimensions in the pdf document. ➤PDF (dimensions-plan) download page : www.greensawdiy.com/universal-circularsaw-guide.html

[@Transtaganu]

Thank you very much.

[@adolfofelixpiccoli7667]

Exelente guia gracias

[@stolly5839]

5 more to go..

[@keupondestroy911]

Merci beaucoup pour la vidéo

[@GreenSaw]

Je suis heureux que vous ayez aimé. Merci d'avoir regardé et commenté.

[@백암-h5w]

아이디어 좋으시네요 굿??

[@ФедорРубкалев]

Простая и понятная конструкция

[@cokhichetao72]

Tuyệt vời 👍👍

[@yavuztonyal5404]

Çok güzel olmuş eline sağlık

[@GreenSaw]

Beğendiğinize sevindim. Yorum yaptığınız için teşekkür ederim.

[@Shour75]

Great project, thank you

[@GreenSaw]

Glad you like it. Thank you for your comment.

[@xavierdelacruz4359]

Buen video cómo siempre

[@GreenSaw]

Me alegro que te guste, muchas gracias.

[@upiupi2429]

hi greensaw, the pdf file can't be downloaded yet? I have joined your channel

[@GreenSaw]

Hello, thank you for joining my channel. I am preparing the PDF document now, it will be downloaded in a short time.

[@upiupi2429]

@@GreenSaw thanks brothers 😎

[@GreenSaw]

Hi, the PDF is ready. Please go to kzbin.info/door/FffS89D6ckU6ycxHulaNxgcommunity

[@jorgmuller117]

Klasse👌 Das werde ich mir auch bauen 😉

[@GreenSaw]

Froh, dass Sie es mögen. Danke für deinen Kommentar. Meine anderen Videos sind auch sehr schön, bitte schaut sie euch auch an.

[@robertomessias3868]

Tentei fazer o download do pdf e não consegui...

[@JangirWoodWorks]

Dear sir how to veener edge bevel 45° by trimmer and router

[@tyronebeck2374]

very helpful I thank you.

[@GreenSaw]

Glad you like it. Thank you for your comment.

[@muhammetakgul5287]

Güzel bir aparat, fakat neden bu kadar parca eklediniz, butun parcadan imal edilemezmiydi? amaç atık parcalarimi degerlendirmek

[@youtukang]

☺☺👍

[@GreenSaw]

Merhaba, bu konu için video açıklamalarında bilgi vermiştim ama videoya yazmayı atlamışım. Elimde büyük boy kontrplak kalmadığı için dediğiniz gibi küçük parçaları değerlendirmek istedim. Tabiki elinizde uygun ebatta kontrplak var ise tek parça olarak yapmak daha kolay olacaktır. İzlediğiniz ve yorum yaptığınız için teşekkür ederim. Sağlıkcakla kalın.

[@youtukang]

@@GreenSaw 🙏🤝🇮🇩🇮🇩 hyy friend whr u from? 😊

[@scottswineford6714]

Interesting idea

[@dariosalinas9662]

Me parece excelente guía

[@guillermograndez1712]

gracias excelente idea

[@GreenSaw]

Me alegro de que te guste. Gracias por tu comentario.

[@webe6264]

Nice tool

[@DwEarncrypto]

You are a smart and profesional. Please make workbench .thanks

[@GreenSaw]

Thanks for your beautiful comment.

[@thomasjungjohann-blaser4449]

Well done. 🖒

[@nonicksquibedo3679]

nice one....

[@AnnaRamosArt]

Fantastic 😍

[@GreenSaw]

Thank you 😊

[@luismanuelmartinez]

Excelente guia

[@kamiltukaev8833]

Super!

[@alainrenat1756]

Very nice

[@GreenSaw]

Glad you like it. Thank you for your comment.

[@rudypola4473]

un excelente proyecto

[@GreenSaw]

Me alegro de que te guste. Gracias por tu comentario.

[@sergiosantillan7147]

excelente gracias por commpartir

[@GreenSaw]

Gracias por tu comentario. Te deseo días saludables.

[@marcelofacchinetti]

Show! 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

[@amigosdelamusicacasasimarr8613]

Fantástico!

[@harounedwards1675]

I really need to download the pdf

[@GreenSaw]

You can download this pdf.

[@andrepedro3500]

muito bom trabalho

[@Zsasz2]

muy buena

[@Mo2hr2]

Hallo. Da gibt es ja wieder was zum nachbauen für mich. Jetzt muss ich nur noch an Werkstoff kommen.

[@abdulazeezadewaleoderinde1968]

Its thoughtful

[@ilknurozkan4524]

Elinize sağlık

[@cliffjohnson2273]

not impressed How do you set that to cut 22° or 60°

[@joaoluis1744]

muito bom fixe

[@GaetanoGallozzi]

bien fait, très astucieux (y)

[@ЭдуардБахарев-к7х]

Про рубанок по подробней пожалуста !

[@antoniomorrone7897]

grazie

[@monomax33]

немного заморочено , но, способ рабочий

[@bamdss]

Ну кто же знал что ручка будет мешать😁

[@Максим-б9м5ь]

Никогда не понимал обоснованности расположения двигателя слева. Я правша и хочу видеть рез. Да и не каждую заготовку можно зафиксировать так, чтобы двигатель не упирался в струбцину. Достойная направляющая!

[@BorgDrohn]

Was mir nicht gefällt ist das gestückel der Platte, statt diese aus einem Stück zu fertigen.

[@upiupi2429]

First ☝

[@eballacharles0302]

👍👌👊

[@micheleugene7237]

top

[@felipeluna606]

👍

[@semadurmus9080]

👍👍👍👍🧿🧿

[@lurkingcorsa10]

13:45 Is ur baby around u bro?

[@GreenSaw]

😁

[@lurkingcorsa10]

@@GreenSaw syntetic Voice, right?😂

[@GreenSaw]

@@lurkingcorsa10 Yes

[@НиколайГригоров-я1о]

Слишком заумно. Нужно всего 2 бруска и маленький кусок фанеры.

[@GreenSaw]

Рад, что вам это нравится. Спасибо за ваш комментарий.

[@fabricecoloricchio6893]

pas encore 100 commentaires

[@GreenSaw]

Thank you for your comment.

[@markkoons7488]

You're starting out unbearably slow. I'm skipping to the end to see what you built. 'Bye.

[@GreenSaw]

Did you watch the video intro?

[@mikhailmikhail5265]

Exclusively crooked and oblique. Very much somehow sloppy. Everything hangs and walks. Assembly, as they say, from shit and cones. The main tool is grinding paper. Well, the result is the corresponding. Paint and throw out.