DIY VANITY MIRROR UNDER $150 IN ONE DAY!

MY VIDEO ON A DIY VANITY MIRROR THAT I MADE FOR MY WIFEY
LIST OF MATERIALS:
VANITY STRIP (6 LIGHT) QTY. 1 (HORIZONTAL)
www.amazon.com...
VANITY STRIP (4 LIGHT) QTY. 2 (VERTICAL)
www.amazon.com...
-12 PACK LED G25 LIGHT BULB (DIMMABLE) MUST BE THE MOST EXPENSIVE COMPONENT OF THIS PROJECT BUT IT WORTH IT
www.amazon.com...
-3 PACK LED G25 LIGHT BULB (DIMMABLE) MUST BE THE MOST EXPENSIVE COMPONENT OF THIS PROJECT BUT IT WORTH IT
www.amazon.com...
FOOT CONTROL DIMMER
www.amazon.com...
IN ADDITION YOU NEED:
AND OLD OR NEW ELECTRIC CABLE EXTENSION TO USE THE MALE SWITCH CONNECTOR. (YOU CONNECT THE STRIPS WITH THIS CABLE)
PLYWOOD (LAMINATED) THEN YOU DONT HAVE TO PAINT ANYTHING. THE SIZE THAT I USE WAS: 113.5cm x 60cm
MIRROR. THE SIZE ON MY CONFIGURATION WAS: 90.5cm x 50cm
GLUE FOR MIRROR INSTALLING. (YOU CAN ALSO USE DOUBLE FACE TAPE)
FOR WIRING PICS PLEASE CHECK WIRING VIDEO AT THE END OR GO TO THIS LINK:
• WIRING FOR VIDEO (DIY ...
HOPE IT CAN HELP.
PLEASE SUSCRIBE :)

[@AndresZambrano82]

WIRING PICTURES FOR THE VANITY MIRROR kzbin.info/www/bejne/eGKXfq1tgKh1f6c

[@brandenkr3w69]

Where did you get the laminated plywood?

[@kayjay8790]

I wish my hubby would make this for me for a birthday gift...its just that I'm the one who does the DIYs in our relationship lol. Perfect vanity for us makeup gals. Thank you for sharing!

[@Myeyeofthebeholder]

Very pretty. And easy too .. Ty

[@samantham9056]

I love that this was made for wifey, came out beautiful!

[@AndresZambrano82]

S Ellis thanks!

[@MsMzhoneydew]

Hello, where did you find the mirror in the size he used for this project?

[@SirenaSpades]

That is so sweet of you to make that for her!

[@VintageMiscreant]

amazing work! I am so glad you showed how you connected the wires for all 3 light panels

[@AndresZambrano82]

rogueraven130 thanks 🙏🏼

[@Fresita21Velazquez]

Can you do a video on the vanity itself please? It’s beautiful

[@christthecrestin6690]

Hi I love the desk itself the cube style is there a video on how you made it or how can I make it myself?!

[@dolphinslife1314]

I love the side box shelving.

[@MrMaacin05]

i really hope people understand the importance of using LED light bulbs. These bars are rated for 100watts. Using 40 watt incandescent bulbs would put 160 watts on the 4 bulb bars and 240 watts on the 6 bulb bar. These far exceed the rating and pose a serious fire hazard due to overheating. Using LED bulbs do not emit dangerous levels of heat so using 40 watt bulbs in the same scenario does not pose a fire hazard.

[@CarlaBeauty]

MrMaacin05 the ones he listed are led bulbs right?

[@MrMaacin05]

Carla Moran correct

[@NaturallyKoilyKuteness78]

MrMaacin05 Good to know! Thanks for sharing this information with us.

[@MrMaacin05]

NaturallyKoily Kuteness no problem just don't want people to burn their house down lol

[@AndresZambrano82]

THANKS FOR THE INFO!

[@collettewhosthatgirl1330]

I love love this!!! But i couldn't quite tell how you did the wiring because it was soooo fast! Lol....but this is exactly what i want, very nice:)

[@anahihnz3579]

This is very pretty doing one for myself and my daughter for surw

[@carlaa5604]

Can’t wait to make my own, thanks for the video and the information 👍🏼

[@AndresZambrano82]

Carla Acosta thanks to you for watching

[@habibahmckay3993]

Beautiful vanity 💞💕💕💕

[@marinasaliba2334]

This is absolutely perfect. Great job!

[@AndresZambrano82]

Marina Saliba thanks marina 😀

[@chelseagarrett7142]

Very Nice! Where did you buy the laminated plywood? I've checked Home Depot and Lowes but I'm having a hard time finding finished/laminated plywood--I'd rather not have to paint.

[@smithfamily37]

Can you show a diagram of how you connected the 3 wires together and to plug it into the wall and dimmer. At 1:50, it only shows you connecting 2 of them.

[@arrobaPaulaTurbo]

Clyde-Mauronda Smith here’s a video he made, show the wiring kzbin.info/www/bejne/eGKXfq1tgKh1f6c

[@janicerivas2349]

wow that's so sweet and amazing !

[@AndresZambrano82]

Janice Rivas thanks please

[@Asigedge]

I like how proud he looked next to it LMFAO. Good job

[@MissJaydeIMVU]

Beautiful

[@vbr4592]

Hi Andres! Awesome work! I've purchased everything that you used as listed in the description. It seems a few of us are still little bit confused at the wiring system. From 1:50 onwards it does not make too much sense to us as the third plate was not connected and where did the wire at 2:50 come from? Can you please explain in more detail as to how the whole wiring system is connected? Much appreciated :) Love from New Zealand

[@AndresZambrano82]

vbr4592 please send me your email to send you a picture of the wiring. Thanks

[@vbr4592]

Andres Zambrano [e-mail] thanks!

[@vbr4592]

Hi Andres! Can you send me the picture soon? All the parts have JUST arrived! Supper excited. Cheers mate.

[@AndresZambrano82]

HELLO MY FRIEND PLEASE CHECK YOUR EMAIL. THANKS

[@luvnmyag]

Andres Zambrano can I get an email as well on how to wire everything? My husband is going to make me one thank you

[@marsonearth1785]

Hello, 😊👍🏽❤️ nice job I read ALL the comments to make sure I was not asking a repeated question, which I am. Me & Cindy Swain (do Not know her & she didn't get a reply) would like to know about the cubes. Are they a DIY or purchased? If it's a DIY what are the measurements? Thanks in advance 👍🏽

[@AndresZambrano82]

Mars on Earth 2017 hi, yes with plywood also I will try to put another diy on that one. Thanks a lot

[@mawoolridge1]

Thanks for asking this! I need those boxes 😍

[@leslie6337]

I would really love to know where exactly you purchased the mirror from?....that info was not included in your description (lol) I have been on the hunt for the perfect mirror for my DIY vanity and believe it or not...I've had a HARD!! time finding a mirror that has the same edges as the mirror you used in this project..thanks!

[@MissTaviBaby]

Hi, please share the information about the mirror and the actual backing. I mean the size cost location purchased, tools used etcetera. Thanks

[@cutepotato9638]

i wish you can come to my house and do this

[@monikwinchester]

such a supern job!!!! LOVE IT!

[@TheDJ2Fr3sh]

Hi Andres, im trying to build something similar but cant find a mirror that is 36 x 20. Where did you find the mirror you used?

[@memecoolapecoso92507]

Im having a lot of trouble with the mirror, im making this exactly the same way you did and I love it so much, but where did you purchase your mirror and I saw you wrote the mirror dimensions in CM, rounded off did you buy a mirror 36x20 inch? A quick reply would be very much help because I only have a few more days to finish this! Lol, please and thank you!

[@CarlaBeauty]

Kevin Bugallo I have the same problem you do lol I want to know the mirror and plywood dimensions in inches. Anybody help?

[@memecoolapecoso92507]

???

[@mezajane]

Hi, beautiful work! Can you please tell me where did you buy the mirror from? and/or brand. I've been looking for this size and i can't find it. Thank you so much!

[@AndresZambrano82]

Jane Meza hi ;) i live outside US. But you can look at walmart, lowes or homedepot with frame.

[@AndresZambrano82]

Jane Meza hi ;) i live outside US. But you can look at walmart, lowes or homedepot with frame.

[@18victorjr]

hi loved the video just wondering how many cables did you use and if 1 did you cut it in 3 to connect all 3 together? thanks

[@collettewhosthatgirl1330]

karinna1813 he cut an extention cord into 3 pieces

[@salimael6939]

Can you pleasee make a longer video of how you connected the three wires. I watched the link but it didn‘t help so pleasee make another video

[@renuga2007]

Lucky wife 😀

[@MerrpEmOutdoors]

In regards to the mirror sitting on the desk any worries about it rocking forward with an accidental bump to the desk?

[@AndresZambrano82]

El Muchacho never happened but if you can screw it to the desk it would be better

[@krystalfarias3638]

Wow! Amazing! Great husband

[@zuhalkamis8340]

How sweet!

[@sntrl697]

I showed my dad this video and he was “You don’t have to show me I already know I’m an expert...” 1 hour later he told to call my Brother to help him out 😂☝️ then they call my dads friend and the 3 of them were LOST it was so funny, but at the end it came out cute and perfect for me👌

[@lovejessicaax]

I love this this wish you slowed it down and talked :/ I'm slightly slow when it comes to building.. but thanks for sharing! wish me luck lol

[@karinesilva6893]

Other question . How lights did you put on the 6 strips and then the other 4 strips ( vertical) ?

[@leandratv5701]

A year later I love it but im afraid ill loose all my makeup with out drawers . did u build the cubes yourself?

[@lalonjanie]

Where did u buy the mirror?..that measurement

[@leandratv5701]

Tyring to figure out how tall is that table though but to add to my first comment i meant to conclude an alex drawer could be put underneath that table make it so good only one not two because of the cube storage btw please reply soon Thankyou

[@chelseagarrett7142]

Hi Andres, Will you please tell us where to buy the laminated plywood?

[@AndresZambrano82]

Hi Chelsea, thanks for the question, i live in south america here you buy laminated wood for cabinets or other furniture. But if you cannot find this laminated wood, you can just buy 3/4" plywood because as you can see the front of the mirror is just the lights and the mirror you dont see the wood, so it is not necesary to be laminated. With this option you only have to paint the sides. If you need anything else feel free to ask. Greetings

[@a7mad421]

Did you build the desk? If so, is there a video for it?

[@smexxii_mimi1527]

Can I just ask how did u got it to sit on the table? Without falling?

[@gracielaestrada1508]

In the video you only connect two cables. You are not showing the 3rd connection or the connection to the dimmer switch. Can I have more info please

[@jocelyndeloney]

Im still looking for the answer to this lol (the 3rd connection)

[@arrobaPaulaTurbo]

here’s a video he made, show the wiring kzbin.info/www/bejne/eGKXfq1tgKh1f6c

[@bevygreen5850]

Perfect!!!!

[@arrobaPaulaTurbo]

How did you put it on the wall? Did you screw it ou glue it to the wall?

[@cindyswain9420]

Did u build the cubes on the left side of the desk or did u buy them, and if so where??

[@Tanya10312000]

How do you keep the bottom from sliding forward on the table?

[@idaliscollazo543]

absolutely beautiful ❣

[@AndresZambrano82]

Idalis Collazo thanks Idalis

[@idaliscollazo543]

Andres Zambrano Your welcome honey 😘

[@MzFine1]

Do you make vanity mirrors for the public?

[@smithfamily37]

Awesome work! What size screws did you use?

[@AndresZambrano82]

Clyde-Mauronda Smith hi Clyde 1/2 inch

[@smithfamily37]

Andres Zambrano Thanks so much. Where did you purchase the mirror and laminated board from? They did not have those specifications at our Lowes.

[@monicacw7372]

I love it.

[@leandratv5701]

What did you use 113.5cm×60cm of plywood for?

[@priscillaxbeauty]

Does the plywood sit up on the desk or did u hang it on the wall , also where did u buy the white plywood

[@AndresZambrano82]

Priscilla Arreola its sit on the desk. Plywood in Lowe’s

[@realmusic5664]

Wow good job

[@JohnDoe-vw4zf]

how did you attach the mirror to the table

[@xobrook]

You lost me at step one lol Anyways, your wife is lucky to have such a handyman!

[@myang1434]

Where did you get the white board?

[@bibi308]

Where did you get the parts for the boxes in the side and the desk??

[@LCwicked18]

Great job 👍

[@AndresZambrano82]

Wicked18 thanks

[@antoniopalacios2599]

What’s the width of your board and length ?

[@brayant213]

Do u know what was the inches off the mirrors

[@jasminehaule7294]

THANK YOU SO MUCH😍😍😩❤️❤️

[@MissLovelyMG]

Where is the desk from though??

[@jadad71]

Where did you get the dresser and stackers from ?

[@vanessaaguilar4269]

el foco es de led pero de que voltaje o como lo pido mi amor. muy lido mil felicidades

[@AndresZambrano82]

vanessa valle hola! El listado de todos los materiales lo puedes encontrar en la descripción del video. Saludos y Felices Fiestas.

[@jarvisomersa7664]

What was the copper wire for?

[@prttylexy4246]

Very nice!!!

[@AndresZambrano82]

PrttyLexy thanks

[@vanessamariaca3593]

Where do you buy the material

[@KieuDarling]

wheres the desk from or did u make that

[@esmeralda_betances]

What kind of glue you used for the mirror??

[@iayannamitchell3755]

Where did you get the ply wood and the mirror

[@uptownsfinest1598]

I'm trying to build one for my wife but I got 36"x30 so what lights do I get 36" (6) bulbs for all 3 sides ?

[@boloyung88]

I want exact desk where did you get that?

[@anitayang3394]

How did you hang the mirror on the wall?

[@dwalker2225]

hi this is a very nice mirror!!!!! Where do u purchase the mirror from? Which store??

[@AndresZambrano82]

Hi Deanna I live outside us here i went to a mirror store, but you have many options on eBay :) Thanks for watching

[@dwalker2225]

thanks so much!!!!1

[@MsMzhoneydew]

Andres Zambrano that was my question on another comment. Thanks

[@danielsauceda7436]

Where did you get the mirror

[@karinadelatorre2603]

Where did you get the mirror and the wood?

[@ashtoncervantes5406]

Where'd you get the mirror and plywood

[@tyanascx]

super helpful

[@AndresZambrano82]

tyanaac thanks

[@kirawhite77]

Any information on where I can get the table set from? I love that diagonal table

[@ariellehounton8528]

hi I don't really understand the light bar setting. how did u set all the 3 bars together using one switch? or are you using multiple.

[@AndresZambrano82]

Hi Arielle you just need 3 wires (you can use an old extension cord) cut it in 3 pieces then connect one by one the wires making the whole connection please check from min 1:50. Thanks

[@Sergio.Padron]

where you buy the mirror...

[@sailormars7740]

How did you keep it up did it just stand on its own or did you screw it into the wall?

[@AndresZambrano82]

Sailor Mars hi it is stand on its own. Thanks

[@iammack8818]

how does this stand on its own without falling? or did you something to make it stand itself?

[@BrittanyArianna]

What is the piece that you put down first? to put everything on? what were the dimensions?

[@AndresZambrano82]

Brittany Arianna hi 👋🏼 its plywood. You can check dimensions on the description. Thanks

[@datsummerchik]

Is this vanity mounted on the wall or is it sitting in the vanity itself?

[@datsummerchik]

Vanity mirror*

[@josehuertas2441]

How was it hung or is it just sitting on table..

[@lachikydary1434]

Que medida tiene el espejo?

[@karinesilva6893]

Hi do you know what thickness is this wood?

[@DaleSteadman]

Great!

[@dynastieeeee]

Hi can you please explain what you did at 2:48-2:58 please and thank you.

[@shannh6724]

Dynastie Smith Connected the wires to the board for the lights

[@khoapham8551]

Cái gắn đèn là ji thế ạ

[@stefangarza6829]

Where did you get the Plywood?

[@sbrnjhsnon]

Hello, where did you get your mirror from?

[@AndresZambrano82]

Sabrina Johnson hi Sabrina I’m outside us it was made in a mirror store

[@lesliebarajas4869]

Where did you buy the board you used where the light bulbs are ?

[@shannh6724]

Leslie Barajas Check the description box

[@TienTran-dh6dj]

Flywood where you get that??

[@kebzaccord]

what kind of glue did u use?

[@angelherreradominguez]

Increíble!!!

[@taylorjuckes6318]

What size mirror is it??